Abstract: The large-scale deployment of high-energy-density lithium-ion batteries (LIBs) in electric transportation and grid storage has imposed increasingly stringent requirements on battery safety, reliability, and intelligent management. However, the limited observability of internal electrochemical, thermal, and mechanical states remains a fundamental challenge, leading to persistent safety risks, degraded low-temperature performance, and accelerated aging, which collectively hinder the scalable adoption of electrified systems. To overcome these challenges, conventional battery management systems (BMSs) are evolving beyond voltage-current-temperature measurements toward high-fidelity state estimation enabled by advanced nondestructive sensing technologies, including emerging internal and implantable diagnostic concepts. Based on a comprehensive analysis of physical signals associated with material aging and failure mechanisms, this review provides a systematic and critical assessment of nondestructive testing techniques for battery state monitoring. Beyond a conventional technique-oriented summary, recent advances in battery state diagnosis and lifetime management algorithms are examined, with a particular emphasis on multisource physical feature fusion strategies. More importantly, this review establishes a unified framework linking degradation mechanisms, internal physical signals, and state estimation strategies, offering a cross-scale perspective to guide the codesign of advanced sensing technologies and intelligent algorithms, thereby facilitating the development of next-generation BMSs.

锂离子电池老化与安全性的无损感知与失效诊断技术

[1]Abada S, Marlair G, Lecocq A, et al., 2016. Safety focused modeling of lithium-ion batteries: a review. Journal of Power Sources, 306: 178- 192.

[2]Abellan P, Mehdi BL, Parent LR, et al., 2014. Probing the degradation mechanisms in electrolyte solutions for Li-ion batteries by in situ transmission electron microscopy. Nano Letters, 14(3): 1293- 1299.

[3]Ai SG, Xiao MM, Chen J, et al., 2022. Microstructure evolution of lithium-ion battery separator under compressive loading: in situ experiments and image-based finite simulations. Energy Technology, 10(6): 2200017.

[4]Attia PM, Grover A, Jin N, et al., 2020. Closed-loop optimization of fast-charging protocols for batteries with machine learning. Nature, 578(7795): 397- 402.

[5]Bang J, Chun B, Kim M, et al., 2025. Rapid thermal runaway detection of lithium-ion battery via swelling-based state-of-charge monitoring using piezoresistive sponge sensor. eTransportation, 24: 100404.

[6]Bank T, Feldmann J, Klamor S, et al., 2020. Extensive aging analysis of high-power lithium titanate oxide batteries: impact of the passive electrode effect. Journal of Power Sources, 473: 228566.

[7]Barré A, Deguilhem B, Grolleau S, et al., 2013. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications. Journal of Power Sources, 241: 680- 689.

[8]Bétermier F, Daher N, Blanquer LA, et al., 2023. Understanding the electrochemical performances of Si anodes incorporating mechanically interlocked binders prepared from α-cyclodextrin-based polyrotaxanes. Chemistry of Materials, 35(3): 937- 947.

[9]Birkl CR, Roberts MR, McTurk E, et al., 2017. Degradation diagnostics for lithium ion cells. Journal of Power Sources, 341: 373- 386.

[10]Börger EM, Jochler E, Kaufmann J, et al., 2017. Aging of ceramic coated graphitic negative and NCA positive electrodes in commercial lithium-ion battery cells–an ex-situ study of different states of health for identification and quantification of aging influencing parameters. Journal of Energy Storage, 13: 304- 312.

[11]Carta A, Locci N, Muscas C, et al., 2011. GPS and IEEE 1588 synchronization for the measurement of synchrophasors in electric power systems. Computer Standards & Interfaces, 33(2): 176- 181.

[12]Chang Y, Cheng Y, Jia R, et al., 2025. Unified iontronic sensing for operando monitoring of physical-chemical events in lithium-ion batteries. National Science Review, 12(6): nwaf151.

[13]Che YH, Hu XS, Lin XK, et al., 2023. Health prognostics for lithium-ion batteries: mechanisms, methods, and prospects. Energy & Environmental Science, 16(2): 338- 371.

[14]Chen SZ, Liu J, Yuan HL, et al., 2025. AM-MFF: a multi-feature fusion framework based on attention mechanism for robust and interpretable lithium-ion battery state of health estimation. Applied Energy, 381: 125116.

[15]Chen ZW, Lin JW, Zhu CC, et al., 2023. Detection of jelly roll pressure evolution in large-format Li-ion batteries via in situ thin film flexible pressure sensors. Journal of Power Sources, 566: 232960.

[16]Chi GD, Dai ZX, Liu XY, et al., 2025. Multilayer dual-embedded temperature-pressure synergized sensing of “breathing effect” in lithium-ion cells. Carbon, 244: 120636.

[17]Christensen J, Newman J, 2004. A mathematical model for the lithium-ion negative electrode solid electrolyte interphase. Journal of the Electrochemical Society, 151(11): A1977- A1988.

[18]Christensen J, Newman J, 2006. Stress generation and fracture in lithium insertion materials. Journal of Solid State Electrochemistry, 10(5): 293- 319.

[19]Dawkins JIG, Martens I, Danis A, et al., 2023. Mapping the total lithium inventory of Li-ion batteries. Joule, 7(12): 2783- 2797.

[20]Deng JJ, Yu XL, Pang DQ, et al., 2025. Cutting-edge gas sensor design for monitoring thermal runaway in lithium-ion batteries: a critical review. Journal of Energy Chemistry, 109: 769- 785.

[21]Deng W, Yin X, Bao W, et al., 2022. Quantification of reversible and irreversible lithium in practical lithium-metal batteries. Nature Energy, 7(11): 1031- 1041.

[22]Ding SC, Wang L, Dai HF, et al., 2025. Prognosticating nonlinear degradation in lithium-ion batteries: operando pressure as an early indicator preceding other signals of capacity fade and safety risks. Energy Storage Materials, 75: 103998.

[23]Dong GZ, Wei JW, 2021. A physics-based aging model for lithium-ion battery with coupled chemical/mechanical degradation mechanisms. Electrochimica Acta, 395: 139133.

[24]Dong YH, Li J, 2023. Oxide cathodes: Functions, instabilities, self healing, and degradation mitigations. Chemical Reviews, 123(2): 811- 833.

[25]Doyle M, Fuller TF, Newman J, 1993. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell. Journal of the Electrochemical Society, 140(6): 1526- 1533.

[26]Fan JB, Liu CC, Li N, et al., 2025. Wireless transmission of internal hazard signals in Li-ion batteries. Nature, 641(8063): 639- 645.

[27]Fang RQ, Jiao JN, Li W, et al., 2025. Mechano-electrochemical impedance spectroscopy: experimentation, interpretation, and application. Joule, 9(12): 102177.

[28]Feng XN, Ouyang MG, Liu X, et al., 2018. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Materials, 10: 246- 267.

[29]Feng XN, Ren DS, He XM, et al., 2020. Mitigating thermal runaway of lithium-ion batteries. Joule, 4(4): 743- 770.

[30]Fleming J, Amietszajew T, Charmet J, et al., 2019. The design and impact of in-situ and operando thermal sensing for smart energy storage. Journal of Energy Storage, 22: 36- 43.

[31]Fortier A, Tsao M, Williard N, et al., 2017. Preliminary study on integration of fiber optic Bragg grating sensors in Li-ion batteries and in situ strain and temperature monitoring of battery cells. Energies, 10(7): 838.

[32]Foss CEL, Talkhoncheh MK, Ulvestad A, et al., 2025. Revisiting mechanism of silicon degradation in Li-ion batteries: effect of delithiation examined by microscopy combined with ReaxFF. The Journal of Physical Chemistry Letters, 16(9): 2238- 2244.

[33]Fuller TF, Doyle M, Newman J, 1994. Simulation and optimization of the dual lithium ion insertion cell. Journal of the Electrochemical Society, 141(1): 1- 10.

[34]Gao YZ, Onori S, 2025. Advancing SOC estimation in LiFePO ₄ batteries: enhanced d Q/d V curve and short-pulse methods. eTransportation, 26: 100466.

[35]Gardner C, Langhammer E, Du WJ, et al., 2022. In-situ Li-ion pouch cell diagnostics utilising plasmonic based optical fibre sensors. Sensors, 22(3): 738.

[36]Ge MF, Liu YB, Jiang XX, et al., 2021. A review on state of health estimations and remaining useful life prognostics of lithium-ion batteries. Measurement, 174: 109057.

[37]Geslin A, van Vlijmen B, Cui X, et al., 2023. Selecting the appropriate features in battery lifetime predictions. Joule, 7(9): 1956- 1965.

[38]Guo J, Li PW, Piccolo F, et al., 2025. Degradation and failure mechanisms of lithium/LiNi _x Co _y Mn _{1– x – y} O ₂ batteries. ACS Energy Letters, 10(5): 2318- 2340.

[39]Guo JY, Dong GZ, Wei JW, 2026. Battery state of health estimation based on automatic feature selection and streamlined temporal focus. Journal of Energy Storage, 141: 119160.

[40]Guo LY, Thornton DB, Koronfel MA, et al., 2021. Degradation in lithium ion battery current collectors. Journal of Physics: Energy, 3(3): 032015.

[41]Guo S, Luo H, Gao Z, et al., 2025. Embedded sensing: the neural frontier and early-warning revolution in battery safety monitoring. Energy Storage Materials, 82: 104582.

[42]Guo XN, Guo S, Wu CW, et al., 2023. Intelligent monitoring for safety-enhanced lithium-ion/sodium-ion batteries. Advanced Energy Materials, 13(10): 2203903.

[43]Han GC, Yan JZ, Guo Z, et al., 2021. A review on various optical fibre sensing methods for batteries. Renewable and Sustainable Energy Reviews, 150: 111514.

[44]Hepburn C, Qi Y, Stern N, et al., 2021. Towards carbon neutrality and China’s 14th five-year plan: clean energy transition, sustainable urban development, and investment priorities. Environmental Science and Ecotechnology, 8: 100130.

[45]Hu XR, Jiang ZL, Yan LQ, et al., 2020. Real-time visualized battery health monitoring sensor with piezoelectric/pyroelectric poly (vinylidene fluoride-trifluoroethylene) and thin film transistor array by in-situ poling. Journal of Power Sources, 467: 228367.

[46]Huang FF, Ma JM, Xia HY, et al., 2019. Capacity loss mechanism of the Li ₄Ti ₅O ₁₂ microsphere anode of lithium-ion batteries at high temperature and rate cycling conditions. ACS Applied Materials & Interfaces, 11(40): 37357- 37364.

[47]Huang JQ, Albero Blanquer L, Bonefacino J, et al., 2020. Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors. Nature Energy, 5(9): 674- 683.

[48]Huang JQ, Han XL, Liu F, et al., 2021. Monitoring battery electrolyte chemistry via in-operando tilted fiber Bragg grating sensors. Energy & Environmental Science, 14(12): 6464- 6475.

[49]Huang XS, Hitt J, 2013. Lithium ion battery separators: development and performance characterization of a composite membrane. Journal of Membrane Science, 425- 426: 163- 168.

[50]Jeong S, Kim HK, Han ML, et al., 2024. Aero: automotive ethernet real-time observer for anomaly detection in in-vehicle networks. IEEE Transactions on Industrial Informatics, 20(3): 4651- 4662.

[51]Jia T, Zhang Y, Ma CY, et al., 2024. The early warning for thermal runaway of lithium-ion batteries based on internal and external temperature model. Journal of Energy Storage, 83: 110690.

[52]Jia XY, Zhu JG, Knapp M, et al., 2026. A review of battery failure: classification, mechanisms, analysis, and management. Renewable and Sustainable Energy Reviews, 225: 116126.

[53]Kabir MM, Demirocak DE, 2017. Degradation mechanisms in Li-ion batteries: a state-of-the-art review. International Journal of Energy Research, 41(14): 1963- 1986.

[54]Khan A, Naqvi IH, Bhargava C, et al., 2025. Safety and reliability analysis of lithium-ion batteries with real-time health monitoring. Renewable and Sustainable Energy Reviews, 212: 115408.

[55]Kim M, Ghoniem AF, Hong J, 2025. Primary exothermic reaction pathways between solid electrolyte interphases and electrolytes during the onset of thermal runaway in lithium-ion batteries. Energy Storage Materials, 81: 104537.

[56]Knott LM, Long E, Garner CP, et al., 2024. Insights into lithium-ion battery cell temperature and state of charge using dynamic electrochemical impedance spectroscopy. International Journal of Energy Research, 2024(1): 9657360.

[57]Kong DP, Wang GQ, Ping P, et al., 2022. A coupled conjugate heat transfer and CFD model for the thermal runaway evolution and jet fire of 18650 lithium-ion battery under thermal abuse. eTransportation, 12: 100157.

[58]Kwak G, Park J, Lee J, et al., 2007. Effects of anode active materials to the storage-capacity fading on commercial lithium-ion batteries. Journal of Power Sources, 174(2): 484- 492.

[59]Lechtenfeld CT, Buchmann J, Hagemeister J, et al., 2024. Analyzing the effect of electrolyte quantity on the aging of lithium-ion batteries. Advanced Science, 11(39): 2405897.

[60]Lee CY, Peng HC, Lee SJ, et al., 2015. A flexible three-in-one microsensor for real-time monitoring of internal temperature, voltage and current of lithium batteries. Sensors, 15(5): 11485- 11498.

[61]Lee CY, Lee SJ, Hung YM, et al., 2017. Integrated microsensor for real-time microscopic monitoring of local temperature, voltage and current inside lithium ion battery. Sensors and Actuators A: Physical, 253: 59- 68.

[62]Lee SJ, Lee CY, Chung MY, et al., 2013. Lithium-ion battery module temperature monitoring by using planer home-made micro thermocouples. International Journal of Electrochemical Science, 8(3): 4131- 4141.

[63]Leung K, 2016. First-principles modeling of Mn(II) migration above and dissolution from Li _x Mn ₂O ₄(001) surfaces. Chemistry of Materials, 29(6): 2550- 2562.

[64]Li B, Parekh MH, Adams RA, et al., 2019. Lithium-ion battery thermal safety by early internal detection, prediction and prevention. Scientific Reports, 9(1): 13255.

[65]Li DJ, Danilov DL, Xie J, et al., 2016. Degradation mechanisms of C ₆/LiFePO ₄ batteries: experimental analyses of calendar aging. Electrochimica Acta, 190: 1124- 1133.

[66]Li J, Adewuyi K, Lotfi N, et al., 2018. A single particle model with chemical/mechanical degradation physics for lithium ion battery state of health (SOH) estimation. Applied Energy, 212: 1178- 1190.

[67]Li M, Zhang YL, Zhou H, et al., 2024. Lithium inventory tracking as a non-destructive battery evaluation and monitoring method. Nature Energy, 9(5): 612- 621.

[68]Li P, Wang ZZ, Feng YY, et al., 2025. Engineering semiconductor metal oxide nanostructures for chemiresistive gas sensors in early warning of battery thermal runaway. TrAC Trends in Analytical Chemistry, 193: 118480.

[69]Li QW, Xue WL, 2025. A review of feature extraction toward health state estimation of lithium-ion batteries. Journal of Energy Storage, 112: 115453.

[70]Li XY, Yuan CG, Wang ZP, et al., 2022. Lithium battery state-of-health estimation and remaining useful lifetime prediction based on non-parametric aging model and particle filter algorithm. eTransportation, 11: 100156.

[71]Li XY, Zhang ZY, Fu K, et al., 2023. Stress state characterization of Li-ion batteries based on a membrane sensor. Energy & Fuels, 37(17): 13526- 13535.

[72]Li YD, Wang L, Song YZ, et al., 2024. Functional optical fiber sensors detecting imperceptible physical/chemical changes for smart batteries. Nano-Micro Letters, 16(1): 154.

[73]Li YP, Zhang Y, Li Z, et al., 2022. Operando decoding of surface strain in anode-free lithium metal batteries via optical fiber sensor. Advanced Science, 9(26): 2203247.

[74]Li Z, Zhang JB, Wu B, et al., 2013. Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples. Journal of Power Sources, 241: 536- 553.

[75]Lin N, Jia Z, Wang ZH, et al., 2017. Understanding the crack formation of graphite particles in cycled commercial lithium-ion batteries by focused ion beam - scanning electron microscopy. Journal of Power Sources, 365: 235- 239.

[76]Lin XK, Khosravinia K, Hu XS, et al., 2021. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries. Progress in Energy and Combustion Science, 87: 100953.

[77]Liu BH, Wu CJ, Liu Y, et al., 2025. Electrochemical-mechanical understanding of the accelerated degradation of lithium-ion batteries caused by mechanical stress. Energy, 333: 137420.

[78]Liu HQ, Wei ZB, He WD, et al., 2017. Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review. Energy Conversion and Management, 150: 304- 330.

[79]Liu KL, Zhao SW, Wang Y, et al., 2025. Advanced fault diagnosis in batteries: insights into fault mechanisms, sensor fusion, and artificial intelligence. Advances in Applied Energy, 20: 100247.

[80]Liu QY, Wang XW, Zhu JG, et al., 2025. Experimental study on distributed measurement of internal pressure in lithium-ion batteries using thin-film sensors. World Electric Vehicle Journal, 16(5): 270.

[81]Liu Y, Dong JY, Zhou JL, et al., 2026. Interfacial evolution and accelerated aging mechanism for LiFePO ₄/graphite pouch batteries under multi-step indirect activation. Nano-Micro Letters, 18(1): 136.

[82]Liu YM, Tian Y, Fu ZQ, et al., 2025. Thermite reaction-induced thermal runaway of lithium-ion batteries. Advanced Materials, 37(43): e10486.

[83]Liu YY, Zhu YY, Cui Y, 2019. Challenges and opportunities towards fast-charging battery materials. Nature Energy, 4(7): 540- 550.

[84]Longchamps RS, Yang XG, Wang CY, 2022. Fundamental insights into battery thermal management and safety. ACS Energy Letters, 7(3): 1103- 1111.

[85]Lu XB, Tarascon JM, Huang JQ, 2022. Perspective on commercializing smart sensing for batteries. eTransportation, 14: 100207.

[86]Lu Y, Wang XD, Mao SY, et al., 2023. Smart batteries enabled by implanted flexible sensors. Energy & Environmental Science, 16(6): 2448- 2463.

[87]Lv CD, Zhou X, Zhong LX, et al., 2022. Machine learning: an advanced platform for materials development and state prediction in lithium-ion batteries. Advanced Materials, 34(25): 2101474.

[88]Mallapaty S, 2020. How China could be carbon neutral by mid-century. Nature, 586(7830): 482- 483.

[89]Mevawalla A, Panchal S, Tran MK, et al., 2020. Mathematical heat transfer modeling and experimental validation of lithium-ion battery considering: tab and surface temperature, separator, electrolyte resistance, anode-cathode irreversible and reversible heat. Batteries, 6(4): 61.

[90]Moradian JM, Ali A, Yan XH, et al., 2025. Sensors innovations for smart lithium-based batteries: advancements, opportunities, and potential challenges. Nano-Micro Letters, 17(1): 279.

[91]Müller V, Scurtu RG, Memm M, et al., 2019. Study of the influence of mechanical pressure on the performance and aging of lithium-ion battery cells. Journal of Power Sources, 440: 227148.

[92]Nam GW, Park NY, Park KJ, et al., 2019. Capacity fading of Ni-rich NCA cathodes: effect of microcracking extent. ACS Energy Letters, 4(12): 2995- 3001.

[93]O’Kane SEJ, Ai WL, Madabattula G, et al., 2022. Lithium-ion battery degradation: how to model it. Physical Chemistry Chemical Physics, 24(13): 7909- 7922.

[94]Paljk T, Bracamonte V, Syrový T, et al., 2023. Integrated sensor printed on the separator enabling the detection of dissolved manganese ions in battery cell. Energy Storage Materials, 55: 55- 63.

[95]Paul PP, Thampy V, Cao CT, et al., 2021. Quantification of heterogeneous, irreversible lithium plating in extreme fast charging of lithium-ion batteries. Energy & Environmental Science, 14(9): 4979- 4988.

[96]Peng XL, Han J, Zhang Q, et al., 2022. Real-time mechanical and thermal monitoring of lithium batteries with PVDF-TrFE thin films integrated within the battery. Sensors and Actuators A: Physical, 338: 113484.

[97]Rosso M, Brissot C, Teyssot A, et al., 2006. Dendrite short-circuit and fuse effect on Li/polymer/Li cells. Electrochimica Acta, 51(25): 5334- 5340.

[98]Rufino Júnior CA, Sanseverino ER, Gallo P, et al., 2024. Unraveling the degradation mechanisms of lithium-ion batteries. Energies, 17(14): 3372.

[99]Schmuch R, Wagner R, Hörpel G, et al., 2018. Performance and cost of materials for lithium-based rechargeable automotive batteries. Nature Energy, 3(4): 267- 278.

[100]Severson KA, Attia PM, Jin N, et al., 2019. Data-driven prediction of battery cycle life before capacity degradation. Nature Energy, 4(5): 383- 391.

[101]Shen WJ, Huang JD, Qu XY, et al., 2024. Cracking mechanism and inhibition strategies of polycrystalline NCM electrode particles. ACS Applied Materials & Interfaces, 16(42): 57074- 57090.

[102]Shu X, Shen JW, Guo FX, et al., 2025. Towards real-world battery health intelligence: a review of machine learning advances and challenges in SOH estimation. eTransportation, 26: 100509.

[103]Sun BC, Xu GB, Ji X, et al., 2024. A strain-resistant flexible thermistor sensor array based on CNT/MXene hybrid materials for lithium-ion battery and human temperature monitoring. Sensors and Actuators A: Physical, 368: 115059.

[104]Sun N, Rong QL, Wu J, et al., 2025. Fully printable integrated multifunctional sensor arrays for intelligent lithium-ion batteries. Nature Communications, 16(1): 7361.

[105]Thackeray MM, 2021. Exploiting the spinel structure for Li-ion battery applications: a tribute to John B. Goodenough. Advanced Energy Materials, 11(2): 2001117.

[106]Tian FX, Chen SW, Ji XF, et al., 2025. Robust lithium-ion battery state of health estimation based on recursive feature elimination-deep bidirectional long short-term memory model using partial charging data. International Journal of Electrochemical Science, 20(1): 100891.

[107]Vetter J, Novák P, Wagner MR, et al., 2005. Ageing mechanisms in lithium-ion batteries. Journal of Power Sources, 147(1-2): 269- 281.

[108]Vorauer T, Kumar P, Berhaut CL, et al., 2020. Multi-scale quantification and modeling of aged nanostructured silicon-based composite anodes. Communications Chemistry, 3(1): 141.

[109]Waldmann T, Gorse S, Samtleben T, et al., 2014. A mechanical aging mechanism in lithium-ion batteries. Journal of the Electrochemical Society, 161(10): A1742- A1747.

[110]Wan XH, Xu XJ, Li FK, et al., 2024. Application of nondestructive testing technology in device-scale for lithium-ion batteries. Small Structures, 5(3): 2300196.

[111]Wang QB, Yan HG, Yang Y, et al., 2025. Review of fault detection approaches for large-scale lithium-ion battery systems: a spatio-temporal perspective. Batteries, 11(11): 414.

[112]Wang QS, Mao BB, Stoliarov SI, et al., 2019. A review of lithium ion battery failure mechanisms and fire prevention strategies. Progress in Energy and Combustion Science, 73: 95- 131.

[113]Wang WH, Zhang YY, Xie B, et al., 2024. Deciphering advanced sensors for life and safety monitoring of lithium batteries. Advanced Energy Materials, 14(24): 2304173.

[114]Wang XY, Zhang JH, Wei XZ, et al., 2018. Battery Impedance Measurement with Step Current of Different Amplitude Under Temperature and State of Charge Control. SAE Technical Paper Series 2018-01-04 43. WCX World Congress Experience, Detroit, USA.

[115]Ward L, Babinec S, Dufek EJ, et al., 2022. Principles of the battery data genome. Joule, 6(10): 2253- 2271.

[116]Wei ZB, Hu J, Li Y, et al., 2022. Hierarchical soft measurement of load current and state of charge for future smart lithium-ion batteries. Applied Energy, 307: 118246.

[117]Wei ZB, Liu KL, Liu XH, et al., 2023. Multilevel data-driven battery management: from internal sensing to big data utilization. IEEE Transactions on Transportation Electrification, 9(4): 4805- 4823.

[118]Wen ZX, Fang WQ, Chen L, et al., 2021. Anticorrosive copper current collector passivated by self-assembled porous membrane for highly stable lithium metal batteries. Advanced Functional Materials, 31(42): 2104930.

[119]Williams JH, Debenedictis A, Ghanadan R, et al., 2012. The technology path to deep greenhouse gas emissions cuts by 2050: the pivotal role of electricity. Science, 335(6064): 53- 59.

[120]Wu H, Zhuo D, Kong DS, et al., 2014. Improving battery safety by early detection of internal shorting with a bifunctional separator. Nature Communications, 5(1): 5193.

[121]Wu YT, Long XL, Lu JY, et al., 2023. Long-life in-situ temperature field monitoring using fiber Bragg grating sensors in electromagnetic launch high-rate hardcase lithium-ion battery. Journal of Energy Storage, 57: 106207.

[122]Xia M, Chen JN, Wu WH, et al., 2025. Quantitative and non-destructive analysis of failure process of pouch lithium metal batteries. Advanced Energy Materials, 15(48): e03858.

[123]Xin YD, Liu CC, Li N, et al., 2023. In-situ monitoring of multiple signals evolution behaviour for commercial lithium-ion batteries during internal short circuit. Applied Energy, 350: 121754.

[124]Xu XY, Zhou TT, Sun Q, et al., 2025. Advanced keratin-coated polypropylene composite current collectors: design for in-situ, integrated flexible temperature sensing in lithium-ion batteries. Chemical Engineering Journal, 519: 165276.

[125]Yang SC, Hua Y, Qiao D, et al., 2019. A coupled electrochemical-thermal-mechanical degradation modelling approach for lifetime assessment of lithium-ion batteries. Electrochimica Acta, 326: 134928.

[126]Yu KM, Chen W, Deng DR, et al., 2024. Advancements in battery monitoring: harnessing fiber grating sensors for enhanced performance and reliability. Sensors, 24(7): 2057.

[127]Yuan HT, Cui NX, Li CL, et al., 2023. Early stage internal short circuit fault diagnosis for lithium-ion batteries based on local-outlier detection. Journal of Energy Storage, 57: 106196.

[128]Yun X, Zhang X, Wang C, et al., 2025. A review on state of charge estimation methods for lithium-ion batteries based on data-driven and model fusion. Journal of Energy Storage, 129: 117389.

[129]Zeng X, Berecibar M, 2025. Emerging sensor technologies and physics-guided methods for monitoring automotive lithium-based batteries. Communications Engineering, 4(1): 44.

[130]Zeng ZH, Lei H, Lu XJ, et al., 2025. Li-Fe anti-sites defects in LiFePO ₄: mechanism, characterization and cathode-regeneration applications. Energy Storage Materials, 74: 103947.

[131]Zhan ZY, Peng WJ, Yuan L, et al., 2025. Quantifying and inhibiting manganese dissolution in Li-rich Mn-based cathode materials. ACS Nano, 19(46): 40258- 40270.

[132]Zhang JZ, Wang YN, Jiang BB, et al., 2023. Realistic fault detection of Li-ion battery via dynamical deep learning. Nature Communications, 14(1): 5940.

[133]Zhang K, Li B, Zuo YX, et al., 2019. Voltage decay in layered Li-rich Mn-based cathode materials. Electrochemical Energy Reviews, 2(4): 606- 623.

[134]Zhang Y, Zhu YY, Zheng SH, et al., 2021. Ink formulation, scalable applications and challenging perspectives of screen printing for emerging printed microelectronics. Journal of Energy Chemistry, 63: 498- 513.

[135]Zhang YW, Tang QC, Zhang Y, et al., 2020. Identifying degradation patterns of lithium ion batteries from impedance spectroscopy using machine learning. Nature Communications, 11(1): 1706.

[136]Zhang ZK, Zhao WJ, Ma YC, et al., 2025. A flexible integrated temperature-pressure sensor for wearable detection of thermal runaway in lithium batteries. Applied Energy, 381: 125191.

[137]Zhao HA, Xiang LZ, Cui BH, et al., 2025. Operando mapping of the dynamic evolution of spatially inhomogeneous reactions in commercial batteries. Joule, 9(12): 102201.

[138]Zhou C, Xu HB, Wei YY, et al., 2024. Remaining useful life prediction method of lithium-ion battery based on KPCA-IVMD-SE-DNN. Journal of Physics: Conference Series, 2741(1): 012073.

[139]Zhu SX, Han JD, An HY, et al., 2020. A novel embedded method for in-situ measuring internal multi-point temperatures of lithium ion batteries. Journal of Power Sources, 456: 227981.

Similar articles