
Xiao ZHENG. A thermal management strategy for hybrid electric drive tracked vehicles considering system safety and energy consumption based on the GMA-TD3-MPC algorithm[J]. Journal of Zhejiang University Science A,in press.Frontiers of Information Technology & Electronic Engineering,in press.https://doi.org/10.1631/jzus.A2500493 @article{title="A thermal management strategy for hybrid electric drive tracked vehicles considering system safety and energy consumption based on the GMA-TD3-MPC algorithm", %0 Journal Article TY - JOUR
基于GMA-TD3-MPC算法考虑系统安全与能耗的混合动力履带车热管理策略机构:浙江大学,动力机械与车辆工程研究所,中国杭州,310027 目的:混合动力履带车(HETV)在复杂工况下面临严峻的热安全和能耗挑战,传统热管理策略难以兼顾高精度温度控制与多目标协同优化。本文旨在探讨一种集成门控循环单元、多头注意力、双延迟深度确定性策略梯度与模型预测控制(GMA-TD3-MPC)的分层热管理框架,以协同优化温度控制精度、系统能耗和运行安全。 创新点:1.将深度强化学习(GMA-TD3)与模型预测控制(MPC)进行动态整合,并通过动态阈值触发机制在接近热安全边界时无缝切换至MPC控制器,兼顾了数据驱动的全局寻优与基于模型的局部边界安全性;2.在TD3算法中引入门控循环单元(GRU)与多头注意力(MHA)机制,有效提取强时间序列依赖特征并强化关键决策信息,克服了传统强化学习过滤次优动作时的局限性。 方法:1.通过建立GT-SUITE物理仿真模型,并采用广义回归神经网络(GRNN)建立发动机相关热源组件的散热预测模型,实现对多物理场耦合热环境的精确映射(图1和2);2.通过理论推导与奖励函数设计,构建GMA-TD3-MPC分层架构,并运用动作选择模块和混合函数实现兼顾安全及能耗的温度控制(图3、公式(1)~(7));3.通过引入典型履带车驾驶循环工况,在标准温度(25 °C)和高温(45 °C)下进行联合仿真验证,对比分析所提策略在温度控制及能耗上的可行性和有效性(图5~8)。 结论:1.引入GRU与MHA机制的GMA-TD3算法具备优异的训练收敛性,收敛速度较深度确定性策略梯度(DDPG)和TD3分别提升了约28%和40%。2.运用GMA-TD3-MPC适应性策略后,温度控制精度显著提升;在标准环境越野工况下,高、低温回路的温度波动幅度较单独MPC分别降低了44.19%和6.45%,有效避免了系统过热风险。3.适应性控制策略实现了能耗的大幅优化,在25 °C工况下总能耗较MPC降低5.54%,峰值功率需求降低10.63%;在45 °C高温极端工况下,总能耗大幅下降了13.41%,因此热管理系统整体性能得到显著提高。 关键词组: Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article
Reference[1]Arrinda M, Batalla J, Vicente I, et al., 2025. Model predictive control as the cloud control strategy for a battery thermal management system. Energy Reports, 13: 4635- 4646. [2]Atkinson C, McCane B, Szymanski L, et al., 2021. Pseudo-rehearsal: achieving deep reinforcement learning without catastrophic forgetting. Neurocomputing, 428: 291- 307. [3]Çeliksöz D, Kılıç V, 2024. Series-hybrid powertrains: advancing mobility control in electric tracked vehicle technology. World Electric Vehicle Journal, 15(2): 47. [4]Chen JH, He P, Cai SJ, et al., 2024a. Modeling and temperature control of a water-cooled PEMFC system using intelligent algorithms. Applied Energy, 372: 123790. [5]Chen JH, He P, He ZH, et al., 2024b. Multi-objective decoupling control of thermal management system for PEM fuel cell. Energy and AI, 18: 100447. [6]Cobbe K, Klimov O, Hesse C, et al., 2018. Quantifying generalization in reinforcement learning. arXiv:1812. 02341. [7]Darici S, Canli E, Dogan S, et al., 2012. Determination of heat transfer rate and pressure drop performance of an intercooler for heavy duty engines. International Journal of Arts & Sciences, 5(7): 43- 57. [8]Dong F, Wang ZM, Ni J, 2020. The effect of different coolants on emissions and fuel consumption of a diesel engine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(7): 359. [9]Ghate A, Sundar A, Zhu QL, et al., 2024. Development of an integrated energy and thermal planner for a series hybrid off-road autonomous tracked vehicle. Energy Conversion and Management, 322: 119163. [10]Golubev T, Canull L, Edel Z, 2024. Modeling the impact of thermal management on electric vehicle energy consumption and driving range. 40th Semiconductor Thermal Measurement, Modeling & Management Symposium, p. 1- 7. [11]Guo R, Sun ZY, Luo MH, 2024. Energy-efficient battery thermal management strategy for range extended electric vehicles based on model predictive control and dynamic programming. Energy, 307: 132769. [12]Guo X, Peng JK, He HW, et al., 2025. Integrated thermal-energy management for electric vehicles in high-temperature conditions using hierarchical reinforcement learning. Expert Systems with Applications, 276: 127221. [13]Han J, Yu S, Yi S, 2017. Advanced thermal management of automotive fuel cells using a model reference adaptive control algorithm. International Journal of Hydrogen Energy, 42(7): 4328- 4341. [14]He HW, Su QC, Huang RC, et al., 2024. Enabling intelligent transferable energy management of series hybrid electric tracked vehicle across motion dimensions via soft actor-critic algorithm. Energy, 294: 130933. [15]He P, Chen JH, Zhang CZ, et al., 2024. Optimization of modeling and temperature control of air-cooled PEMFC based on TLBO-DE. Energy and AI, 18: 100430. [16]Hori Y, 2004. Future vehicle driven by electricity and control—research on four-wheel-motored “UOT electric march II”. IEEE Transactions on Industrial Electronics, 51(5): 954- 962. [17]Jiang KR, Tian ZB, Wen T, et al., 2025. Collaborative optimization strategy of hydrogen fuel cell train energy and thermal management system based on deep reinforcement learning. Applied Energy, 393: 126057. [18]Karaoglan MU, 2021. Drive cycle performance analysis for various powertrain alternatives of zero-emission battery electric military vehicles. International Journal of Global Warming, 25(3-4): 482- 497. [19]Li K, Bhattacharyya S, Dinh TQ, et al., 2025. Advanced model predictive control for energy-efficient thermal management in intelligent electric refrigerated vans. 27th International Conference on Advanced Communications Technology, p. 273- 278. [20]Liu HF, Wen MS, Yang HB, et al., 2021. A review of thermal management system and control strategy for automotive engines. Journal of Energy Engineering, 147(2): 03121001. [21]Ma Y, Ma Q, Liu YQ, et al., 2024. Two-level optimization strategy for vehicle speed and battery thermal management in connected and automated EVs. Applied Energy, 361: 122928. [22]Mancarella A, Marello O, 2023. Effect of coolant temperature on performance and emissions of a compression ignition engine running on conventional diesel and hydrotreated vegetable oil (HVO). Energies, 16(1): 144. [23]Nam K, Ahn C, 2025. Energy-efficient battery thermal management in electric vehicles using artificial-neural-network-based model predictive control. World Electric Vehicle Journal, 16(5): 279. [24]Nguyen TT, Nguyen ND, Nahavandi S, 2020. Deep reinforcement learning for multiagent systems: a review of challenges, solutions, and applications. IEEE Transactions on Cybernetics, 50(9): 3826- 3839. [25]Norouzi A, Heidarifar H, Borhan H, et al., 2023. Integrating machine learning and model predictive control for automotive applications: a review and future directions. Engineering Applications of Artificial Intelligence, 120: 105878. [26]Scolaro E, Beligoj M, Estevez MP, et al., 2021. Electrification of agricultural machinery: a review. IEEE Access, 9: 164520- 164541. [27]Shoai Naini S, Miller RS, Rizoo D, et al., 2023. A model reference adaptive controller for an electric motor thermal management system in autonomous vehicles. SAE International Journal of Electrified Vehicles, 12(1): 3- 16. [28]Sundar A, Vannarath A, Prucka R, et al., 2023. The influence of cooling air-path restrictions on fuel consumption of a series hybrid electric off-road tracked vehicle. Energy & Propulsion Conference & Exhibition. [29]Sundar A, Ghate A, Zhu QL, et al., 2026. An integrated power, energy, and thermal management strategy using cascaded control for off-road autonomous hybrid vehicles. Applied Energy, 406: 127269. [30]Tang AH, Wu ZK, Xu TT, et al., 2024. Week-level early warning strategy for thermal runaway risk based on real-scenario operating data of electric vehicles. eTransportation, 19: 100308. [31]Tian J, Jing HC, Xiong Y, et al., 2026. Experimental study of the effect of electrode geometry on the ignition and flame development of NH 3/air mixtures in nanosecond plasma discharges. Combustion and Flame, 286: 114809. [32]Wang D, Zheng WF, Li SQ, et al., 2025. Impact analysis of uncertainty in thermal resistor-capacitor models on model predictive control performance. Energy and Buildings, 328: 115112. [33]Wang F, Harindintwali JD, Yuan ZZ, et al., 2021. Technologies and perspectives for achieving carbon neutrality. Innovation, 2(4): 100180. [34]Wang TY, Wu J, Wu JW, et al., 2025. Energy consumption analysis and performance evaluation of electric vehicle integrated thermal management system experiments. Applied Thermal Engineering, 269: 126002. [35]Wu BY, Jia Z, Li ZG, et al., 2021. Different exhaust temperature management technologies for heavy-duty diesel engines with regard to thermal efficiency. Applied Thermal Engineering, 186: 116495. [36]Xi YG, Li DW, Lin S, 2013. Model predictive control—status and challenges. Acta Automatica Sinica, 39(3): 222- 236. [37]Yu YB, Jiang JY, Min HT, et al., 2023. Integrated energy and thermal management strategy for extended range electric vehicle based on battery temperature and state-of-charge global planning. Energy Conversion and Management, 288: 117154. [38]Yuan RY, Fletcher T, Ahmedov A, et al., 2020. Modelling and co-simulation of hybrid vehicles: a thermal management perspective. Applied Thermal Engineering, 180: 115883. [39]Zhai L, Yan JHY, Liu AG, et al., 2025. Structure design of stator oil circuit and thermal characteristics analysis for high-speed oil-cooled flat wire motor. Transactions of Beijing Institute of Technology, 45(6): 600- 608 (in Chinese). [40]Zhang J, Liu B, Zhou YJ, et al., 2025. Hierarchical energy management strategy for fuel cell hybrid electric vehicles based on improved TD3 considering interior temperature comfort. Applied Thermal Engineering, 276: 126965. [41]Zhao X, Ma XW, Chen BY, et al., 2022. Challenges toward carbon neutrality in China: strategies and countermeasures. Resources, Conservation and Recycling, 176: 105959. [42]Zhu QL, Kumar A, Sundar A, et al., 2022. Development of a series hybrid electrified powertrain for a high speed tracked vehicle based on driving cycle simulation. SAE International Journal of Advances and Current Practices in Mobility, 4(4): 1403- 1412. CLC number: On-line Access: 2026-09-03 Received: 2025-10-08 Revision Accepted: 2026-03-17 Crosschecked: 0000-00-00 Cited: 0 Clicked: 1428 Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou
310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn Copyright © 2000 - 2026 Journal of Zhejiang University-SCIENCE | ||||||||||||||
Open peer comments: Debate/Discuss/Question/Opinion
<1>