Abstract: The controllable active thermo-atmosphere combustor (CATAC) has become a utilizable and effective facility because it benefits the optical diagnostics and modeling. This paper presents the modeling research of the auto-ignition and flames of the H₂/N₂ (H₂/CH₄/N₂, or H₂/H₂O₂/N₂) mixture on a CATAC, and shows curves varying with temperatures of auto-ignition delay, the height of the site of auto-ignition of lifted flames, and flame lift-off height. The results of auto-ignition delay and the lift-off height are compared the experimental results to validate the model. A turning point can be seen on each curve, identified with criterion temperature. It can be concluded that when the co-flow temperature is higher than the criterion temperature, the auto-ignition and lifted flame of the mixture are not stable. Conversely, below the criterion temperature, the mixture will auto-ignite in a stable fashion. Stabilization mechanisms of auto-ignition and lifted flames are analyzed in terms of the criterion temperature.

Key words: Simulation, Combustor, Auto-ignition, Jet flame, Stabilization mechanism

Please provide your name, email address and a comment

Your Name: Affili: E-Mail Address:

Comment (Please comment in English):


Verification Code(click to change a pic):