References:

<HIDE>

[1]Akihiko, T., 2003. The noise reduction measures for Shinkansen 700 series train-sets. Foreign Rolling Stock, 40(6):17-19.

[2]Carter, F., 1926. On the action of a locomotive driving wheel. Proceedings of the Royal Society of London, Series A, 112:151-157.

[3]Chen, H., Ishida, M., Nakahara, T., 2005. Analysis of adhesion under wet conditions for three-dimensional contact considering surface roughness. Wear, 258(7-8):1209-1216.

[4]Chen, S.Y., Sun, H.L., 2011. Experimental analysis of long-term stability of soaking subgrade for high speed railway. Journal of Railway Engineering Society, 12: 40-44 (in Chinese).

[5]Claus, H., Schiehlen, W., 2002. Symbolic-numeric analysis of flexible multibody systems. Mechanics of Structures and Machines, 30(1):1-30.

[6]Cui, D.B., Li, L., Jin, X.S., et al., 2011. Optimal design of wheel profiles based on weighed wheel rail gap. Wear, 271(1-2):218-226.

[7]Cui, D.B., Huang, Z.W., Jin, X.S., et al., 2012. A new wheel profile design method for high-speed vehicle. Proceedings of the 1st International Workshop on High-speed and Intercity Railways, 1, Lecture Notes in Electrical Engineering, 147:225-241.

[8]Cui, D.B., Lin, L., Song, C.Y., et al., 2013. Out of round high-speed wheel and its influence on wheel/rail behavior. Journal of Mechanical Engineering, 49:8-16 (in Chinese).

[9]Damme, S., Nackenhorst, U., Wetzel, A., et al., 2003. On the numerical analysis of the wheel-rail system in rolling contact. System Dynamics and Long-term Behaviour of Railway Vehicles, Track and Subgrade, Springer, p.155-174.

[10]Eade, P.W., Hardy, A.E.J., 1977. Railway vehicle internal noise. Journal of Sound and Vibration, 51(3):403-415.

[11]Färm, J., 2000. Interior structure-borne sound caused by the sleeper-passing frequency. Journal of Sound and Vibration, 231(3):831-837.

[12]Han, J., Wen, Z.F., Wang, R.Q., et al., 2014a. Experimental study on vibration and sound radiation reduction of the web-mounted noise shielding and vibration damping wheel. Noise Control Engineering Journal, 62(3):110-122.

[13]Han, G.X., Zhang, J., Xiao, X.B., et al., 2014b. Study on high-speed train abnormal interior vibration and noise related to wheel roughness. Journal of Mechanical Engineering, in press (in Chinese).

[14]Hardy, A.E.J., 2000. Measurement and assessment of noise within passenger trains. Journal of Sound and Vibration, 231(3):819-829.

[15]He, B., Xiao, X.B., Zhou, Q., et al., 2014. Investigation into external noise of a high-speed train at different speeds. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 15(12):1019-1033.

[16]Jin, X.S., Zhang, J.Y., 2001. A complementary principle of elastic bodies of arbitrary geometry in rolling contact. Computers & Structures, 79(29-30):2635-2644.

[17]Jin, X.S., Shen, Z.Y., 2001. Development of rolling contact mechanics and its application in research on wheel/rail performances. Advances in Mechanics, 31(1):33-46.

[18]Jin, X.S., Shen, Z.Y., 2008. Wheel/Rail Creep Theory and Its Experiments. Southwest Jiaotong University Press, Chengdu, China (in Chinese).

[19]Jin, X.S., Xiao, X.B., Ling, L., et al., 2013. Study on safety boundary for high-speed train running in severe environments. International Journal of Rail Transportation, 1(1-2):87-108.

[20]Jones, C.J.C., Thompson, D.J., 2000. Rolling noise generated by railway wheels with visco-elastic layers. Journal of Sound and Vibration, 231(3):779-790.

[21]Kalker, J.J., 1967. On the Rolling Contact of Two Elastic Bodies in the Presence of Dry Friction. PhD Thesis, Delft University, The Netherlands.

[22]Kalker, J.J., 1982. A fast algorithm for the simplified theory of rolling contact. Vehicle System Dynamics, 11(1):1-13.

[23]Kalker, J.J., 1990. Three-dimensional Elastic Bodies in Rolling Contact. Kluwer Academic Publishers, Dordrecht, The Netherlands.

[24]Knothe, K., Grassie, S.L., 1993. Modeling of railway track and vehicle/track interaction at high frequencies. Vehicle System Dynamics, 22(3-4):209-262.

[25]Lee, Y.B., Rho, J., Kwak, M.H., et al., 2007. Aerodynamic characteristics of high speed train pantograph with the optimized panhead shape. Proceedings of the 7th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, p.84-88.

[26]Letourneaux, F., Guerrand, S., 2000. Assessment of the acoustical comfort in high-speed trains at the SNCF: integration of subjective parameters. Journal of Sound and Vibration, 231(3):839-846.

[27]Li, T., Zhang, J.Y., Zhang, W.H., 2013. A numerical approach to the interaction between airflow and a high-speed train subjected to crosswind. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 14(7):482-493.

[28]Ling, L., 2012. Study on the Dynamic Behaviour of High-speed Train/Track Coupling System Composed of Multiple Vehicles. Southwest Jiaotong University, MS Thesis (in Chinese).

[29]Ling, L., Xiao, X.B., Xiong, J.Y., et al., 2014. A 3D model for coupling dynamics analysis of high-speed train/track system. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 15(12):964-983.

[30]Mellet, C., Letourneau, F., Poissonb, F., et al., 2006. High speed train noise emission: latest investigation of the aerodynamic/rolling noise contribution. Journal of Sound and Vibration, 293(3-5):535-546.

[31]Moon, J.S., Kim, S.W., Kwon, H.B., 2014. A study on the aerodynamic drag reduction of high-speed train using bogie side fairing. Journal of Computational Fluids Engineering, 19(1):41-46.

[32]Nackenhorst, U., 1993. On the finite element analysis of steady state rolling contact. Contact Mechanics–Computational Techniques. Computational Mechanics Publication, Southampton, Boston, p.53.

[33]Oscarsson, J., Dahlberg, T., 1998. Dynamic train/track/ballast interaction—computer model and full-scale experiments. Vehicle System Dynamics, 29(S1):73-84.

[34]Parizet, E., Hamzaoui, N., Jacquemoud, J., 2002. Noise assessment in a high-speed train. Applied Acoustics, 63(10):1109-1124.

[35]Poisson, F., Letourneaux, F., Loizeau, T., et al., 2002. Inside noise of high speed train coaches. Forum Acusticum Sevilla, High Speed Trains, NOI-03-005-IP.

[36]Poisson, F., Gautier, P.E., Letourneaux, F., 2008. Noise sources for high speed trains: a review of results in the TGV Case. Noise and Vibration Mitigation for Rail Transportation Systems, 99:71-77.

[37]Ripke, B., Knothe, K., 1995. Simulation of high frequency vehicle-track interactions. Vehicle System Dynamics, 24(S1):72-85.

[38]Shen, Z.Y., Hedric, K.J., Elkins, J., 1983. A comparison of alternative creep force models for rail vehicle dynamic analysis. Vehicle System Dynamics, 12(1-3):79-83.

[39]Song, H., Park, J.H., Song, S., 2008. Numerical analysis on flow characteristics around a cavity with flaps. 32(9):645-651 (in Korean).

[40]Thompson, D.J., Gautier, P.E., 2006. Review of research into wheel/rail rolling noise reduction. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 220(4):385-408.

[41]Tian, J.Y., Yang, Y., Zhang, S., et al., 2013. Gearbox fault diagnosis technology of high-speed trains. Mechanical Engineer, 6:77-78 (in Chinese).

[42]Vermeulen, J.K., Johnson, K.L., 1964. Contact of non-spherical bodies transmitting tangential forces. Journal of Applied Mechanics, 31(2):338-340.

[43]Wen, Z.F., Jin, X.S., Jiang, Y.Y., 2005. Elastic-plastic finite element analysis of non-steady state wheel-rail rolling contact. Tribology, ASME, 127(4):713-721.

[44]Wu, B., Wen, Z.F., Wang, H.Y., et al., 2014. Numerical analysis on wheel/rail adhesion under mixed contamination of oil and water with surface roughness. Wear, 314(1-2):140-147.

[45]Xiao, X.B., 2013. Study on High-speed Train Derailment Mechanism in Severe Environment. PhD Thesis, Southwest Jiaotong University, Chengdu, China (in Chinese).

[46]Xiao, X.B., Jin, X.S., Deng, Y.Q., et al., 2008. Effect of curved track support failure on vehicle derailment. Vehicle System Dynamics, 46(11):1029-1059.

[47]Xiao, X.B., Ling, L., Jin, X.S., 2012. A study of the derailment mechanism of a high-speed train due to an earthquake. Vehicle System Dynamics, 50(3):449-470.

[48]Yang, Z.P., Liu, W.Z., Zhao, G.L., et al., 2014. Research on key mechanics problems in high-speed trains. Advances in Mechanics, in press (in Chinese).

[49]Yu, M.G., Zhang, J.Y., Zhang, W.H., 2011. Wind-induced security of high-speed trains on the ground. Journal of Southwest Jiaotong University, 46(6):989-995 (in Chinese).

[50]Yu, M.G., Zhang, J.Y., Zhang, W.H., 2013. Multi-objective optimization design method of the high-speed train head. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 14(9):631-641.

[51]Zhai, W.M., Cai, C.B., Guo, S.Z., 1996. Coupling model of vertical and lateral vehicle/track interactions. Vehicle System Dynamics, 26(1):61-79.

[52]Zhai, W.M., Wang, K.Y., Cai, C.B., 2009. Fundamentals of vehicle-track coupled dynamics. Vehicle System Dynamics, 47(11):1349-1376.

[53]Zhai, W.M., Jin, X.S., Zhao, Y.X., 2010. Some typical mechanics problems in high-speed railway engineering. Advances in Mechanics, 40(4):358-374 (in Chinese).

[54]Zhang, S.G., Zhang, W.H., Jin, X.S., 2007. Dynamics of high speed wheel/rail system and its modeling. Chinese Science Bulletin, 52:1566-1575.

[55]Zhang, S.R., Li, X., Wen, Z.F., et al., 2013. Theory and numerical method of elastic bodies in rolling contact with curve contact area. Engineering Mechanics, 30(2):30-37 (in Chinese).

[56]Zhang, J., Xiao, X.B., Zhang, Y.M., 2013a. Noise evaluation in the tourist cabin of high-speed train by using aircraft noise criterion. Journal of Mechanical Engineering, 49(16):33-38 (in Chinese).

[57]Zhang, J., Xiao, X.B., Han, G.X., et al., 2013b. Study on abnormal interior noise of high-speed trains. Proceedings of the 11th International Workshop on Railway Noise, Uddevalla, Sweden, p.759-766.

[58]Zhang, J., Xiao, X.B., Han, J., et al., 2014a. Characteristics of abnormal noise at the ends of the coach and acoustic modal analysis of high-speed train. Chinese Journal of Mechanical Engineering, 50(12):97-103 (in Chinese).

[59]Zhang, J., Han, G.X., Xiao, X.B., et al., 2014b. Influence of wheel polygonal wear on interior noise of high-speed trains. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 15(12):1002-1018.

[60]Zhao, X., Li, Z., 2011. The solution of frictional wheel-rail rolling contact with a 3-D transient finite element model: validation and error analysis. Wear, 271:444-452.

[61]Zhao, X., Wen, Z.F., Wang, H.Y., et al., 2014. Modeling of high-speed wheel-rail rolling contact on a corrugated rail and corrugation development. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 15(12):946-963.

[62]Zhong, S.Q., Xiao, X.B., Wen, Z.F., et al., 2013. The effect of first-order bending resonance of wheelset at high speed on wheel-rail contact behavior. Advances of Mechanical Engineering, 2013:1-19.

[63]Zhong, S.Q., Xiong, J.Y., Xiao, X.B., et al., 2014. Effect of the first two wheelset bending modes on wheel-rail contact behavior. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 15(12):984-1001.

[64]Zhou, J., Goodall, R., Ren, L., et al., 2009. Influences of car body vertical flexibility on ride quality of passenger railway vehicles. Journal of Rail and Rapid Transit, 223(5):461-471.