References:

<HIDE>

[1]Abbasian M, Massoumi B, Mohammad-Rezaei R, et al., 2019. A novel epoxy-based resin nanocomposite: co-curing of epoxidized novolac and epoxidized poly(vinyl chloride) using amine-functionalized silica nanoparticles. Materials Research Express, 6:085346.

[2]Aissaoui N, Bergaoui L, Landoulsi J, et al., 2012. Silane layers on silicon surfaces: mechanism of interaction, stability, and influence on protein adsorption. Langmuir, 28(1):656-665.

[3]Al-Oweini R, El-Rassy H, 2009. Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)₄ and R″Si(OR′)₃ precursors. Journal of Molecular Structure, 919(1-3):140-145.

[4]ASTM, 2003. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM D790. American Society for Testing and Materials, West Conshohocken, USA.

[5]ASTM, 2016. Standard Test Method for Short-beam Strength of Polymer Matrix Composite Materials and Their Laminates, ASTM D2344. American Society for Testing and Materials, West Conshohocken, USA.

[6]ASTM, 2017. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM D3039M. American Society for Testing and Materials, West Conshohocken, USA.

[7]ASTM, 2018. Standard Test Method for Water Absorption of Plastics, ASTM D570. American Society for Testing and Materials, West Conshohocken, USA.

[8]Chen DK, Li J, Ren J, 2011. Influence of fiber surface-treatment on interfacial property of poly(_L-lactic acid)/ ramie fabric biocomposites under UV-irradiation hydrothermal aging. Materials Chemistry and Physics, 126(3):524-531.

[9]Dilfi KF A, Balan A, Bin H, et al., 2018. Effect of surface modification of jute fiber on the mechanical properties and durability of jute fiber-reinforced epoxy composites. Polymer Composites, 39(S4):E2519-E2528.

[10]Dilfi KF A, Che ZJ, Xian GJ, 2019. Grafting ramie fiber with carbon nanotube and its effect on the mechanical and interfacial properties of ramie/epoxy composites. Journal of Natural Fibers, 16(3):388-403.

[11]Fan ZH, Santare MH, Advani SG, 2008. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes. Composites Part A: Applied Science and Manufacturing, 39(3):540-554.

[12]Feng YL, Hu YX, Zhao GY, et al., 2011. Preparation and mechanical properties of high-performance short ramie fiber-reinforced polypropylene composites. Journal of Applied Polymer Science, 122(3):1564-1571.

[13]Fogarty JC, Aktulga HM, Grama AY, et al., 2010. A reactive molecular dynamics simulation of the silica-water interface. Journal of Chemical Physics, 132(17):174704.

[14]Gao X, Jensen RE, McKnight SH, et al., 2011. Effect of colloidal silica on the strength and energy absorption of glass fiber/epoxy interphases. Composites Part A: Applied Science and Manufacturing, 42(11):1738-1747.

[15]Gu YZ, Tan XL, Yang ZJ, et al., 2014. Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding. Materials & Design, 56:852-861.

[16]Hansen D, Bomholt N, Jeppesen JC, et al., 2017. Contact angle goniometry on single micron-scale fibers for composites. Applied Surface Science, 392:181-188.

[17]Hsieh CT, Wu FL, Yang SY, 2008. Superhydrophobicity from composite nano/microstructures: carbon fabrics coated with silica nanoparticles. Surface and Coatings Technology, 202(24):6103-6108.

[18]Jia XL, Li G, Liu BY, et al., 2013. Multiscale reinforcement and interfacial strengthening on epoxy-based composites by silica nanoparticle-multiwalled carbon nanotube complex. Composites Part A: Applied Science and Manufacturing, 48:101-109.

[19]John MJ, Thomas S, 2008. Biofibres and biocomposites. Carbohydrate Polymers, 71(3):343-364.

[20]Kang S, Hong SI, Choe CR, et al., 2001. Preparation and characterization of epoxy composites filled with functionalized nanosilica particles obtained via sol–gel process. Polymer, 42(3):879-887.

[21]Khung YL, Ngalim SH, Meda L, et al., 2014. Preferential formation of Si–O–C over Si–C linkage upon thermal grafting on hydrogen-terminated silicon (111). Chemistry: A European Journal, 20(46):15151-15158.

[22]Kuzmin KL, Timoshkin IA, Gutnikov SI, et al., 2017. Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites. Composite Interfaces, 24(1):13-34.

[23]Li N, Hu P, Zhang XH, et al., 2013a. Effects of oxygen partial pressure and atomic oxygen on the microstructure of oxide scale of ZrB₂–SiC composites at 1500 °C. Corrosion Science, 73:44-53.

[24]Li Y, Han BY, Liu L, et al., 2013b. Surface modification of silica by two-step method and properties of solution styrene butadiene rubber (SSBR) nanocomposites filled with modified silica. Composites Science and Technology, 88:69-75.

[25]Linec M, Music B, 2019. The effects of silica-based fillers on the properties of epoxy molding compounds. Materials, 12(11):1801-1811.

[26]Liu ZN, Xu KL, Sun H, et al., 2015. One-step synthesis of single-layer MnO₂ nanosheets with multi-role sodium dodecyl sulfate for high-performance pseudocapacitors. Small, 11(18):2182-2191.

[27]Saba N, Jawaid M, Alothman OY, et al., 2016. A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Construction and Building Materials, 106:149-159.

[28]Shah DU, 2013. Developing plant fibre composites for structural applications by optimising composite parameters: a critical review. Journal of Materials Science, 48(18):6083-6107.

[29]Shih YF, Huang CC, Chen PW, 2010. Biodegradable green composites reinforced by the fiber recycling from disposable chopsticks. Materials Science and Engineering: A, 527(6):1516-1521.

[30]Siddiqui NA, Li EL, Sham ML, et al., 2010. Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating: effects of CNT morphology and dispersion state. Composites Part A: Applied Science and Manufacturing, 41(4):539-548.

[31]Songolzadeh R, Moghadasi J, 2017. Stabilizing silica nanoparticles in high saline water by using ionic surfactants for wettability alteration application. Colloid and Polymer Science, 295(1):145-155.

[32]Sreekumar PA, Thomas SP, Saiter JM, et al., 2009. Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer molding. Composites Part A: Applied Science and Manufacturing, 40(11):1777-1784.

[33]Tserki V, Matzinos P, Zafeiropoulos NE, et al., 2006. Development of biodegradable composites with treated and compatibilized lignocellulosic fibers. Journal of Applied Polymer Science, 100(6):4703-4710.

[34]Varga C, Miskolczi N, Bartha L, et al., 2010. Improving the mechanical properties of glass-fibre-reinforced polyester composites by modification of fibre surface. Materials & Design, 31(1):185-193.

[35]Vashisth A, Bakis CE, 2019. Multiscale characterization and modeling of nanosilica-reinforced filament wound carbon/epoxy composite. Materials Performance and Characterization, 8(1):1-21.

[36]Wang HG, Xian GJ, Li H, 2015. Grafting of nano-TiO₂ onto flax fibers and the enhancement of the mechanical properties of the flax fiber and flax fiber/epoxy composite. Composites Part A: Applied Science and Manufacturing, 76:172-180.

[37]Wang ZW, Wang TJ, Wang ZW, et al., 2006. The adsorption and reaction of a titanate coupling reagent on the surfaces of different nanoparticles in supercritical CO₂. Journal of Colloid and Interface Science, 304(1):152-159.

[38]Warrier A, Godara A, Rochez O, et al., 2010. The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix. Composites Part A: Applied Science and Manufacturing, 41(4):532-538.

[39]Wei B, Song SH, Cao HL, 2011. Strengthening of basalt fibers with nano-SiO₂–epoxy composite coating. Materials & Design, 32(8-9):4180-4186.

[40]Yeon J, van Duin ACT, 2016. Reaxff molecular dynamics simulations of hydroxylation kinetics for amorphous and nano-silica structure, and its relations with atomic strain energy. The Journal of Physical Chemistry C, 120(1):305-317.

[41]Yu T, Ren J, Li SM, et al., 2010. Effect of fiber surface-treatments on the properties of poly(lactic acid)/ ramie composites. Composites Part A: Applied Science and Manufacturing, 41(4):499-505.

[42]Zeng Y, Liu HY, Mai YW, et al., 2012. Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles. Composites Part B: Engineering, 43(1):90-94.

[43]Zhang HB, Zheng WG, Yan Q, et al., 2010. Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding. Polymer, 51(5):1191-1196.

[44]Zhu ZH, Imada T, Asakura T, 2009. Preparation and characterization of regenerated fiber from the aqueous solution of Bombyx mori cocoon silk fibroin. Materials Chemistry and Physics, 117(2-3):430-433.