Abstract: In routine design of tensioned membrane st ructures, the membrane is gen erally modeled using space membrane elements and the cables by space cable eleme nts, with no sliding allowed between the membrane and the cables. On the other h and, large deflections are expected and sliding between the membrane and the cab les is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface o n the structural behavior. Three analysis models were devised to fulfill this pu rpose: (1) The membrane element shares nodes with the cable element; (2) The cab le can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface-based contact algorithm. The results from three analysis models are compared, showing that cable slidin g has only little influence on the structure shape and on the stress distributio ns in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.

Key words: Membrane structures, Shape finding, Cutting pattern, Cables, Contact simulation

Please provide your name, email address and a comment

Your Name: Affili: E-Mail Address:

Comment (Please comment in English):


Verification Code(click to change a pic):