Abstract: In order to provide parameters for numerical analyses of the huge Three-Gorge concrete dam (2309 m long by 175 m height), complete tensile stress-deformation curves for large-size plain concrete specimens were measured and studied by performing uniaxial tensile tests on large-size unnotched specimens (250 mm×250 mm×1400 mm). The specimens were prepared with the three-graded-aggregate materials provided by the client of the Three-Gorge project. To prevent a failure occurring near the ends of the unnotched specimens, both the ends of each specimen (450 mm in length) were cast using a higher-strength concrete than the middle part (i.e., active part). Tensile tests were completed on a specially-designed tensile testing machine, which can be easily re-assembled to accommodate different-size specimens. To make the specimens fail stably, a cyclic loading scheme was adopted after the peak strength was reached. Four of five tests in this study were successful, and four complete tensile stress-deformation curves were obtained. It was found that the post-peak curve of the large-size specimens used in this study is more gradual than those for the small-size specimens reported in the literature.

Key words: Concrete, Uniaxial tensile tests, Tensile stress, Deformation, Large-size specimens

Please provide your name, email address and a comment

Your Name: Affili: E-Mail Address:

Comment (Please comment in English):


Verification Code(click to change a pic):