|
Journal of Zhejiang University SCIENCE A
ISSN 1673-565X(Print), 1862-1775(Online), Monthly
2011 Vol.12 No.2 P.121-130
Parametric formulae for axial stiffness of CHS X-joints subjected to brace axial tension
Abstract: Recent research has shown that circular hollow section (CHS) joints may exhibit non-rigid behavior under axial load or bending. The non-rigid behavior significantly affects the mechanical performance of structures. This paper is concerned with the parametric formulae for predicting axial stiffness of CHS X-joints while braces are in tension. The factors influencing the axial stiffness of CHS X-joints under brace axial tension are investigated, including the joint geometric parameters, the axial force of the chord, and bending moments of braces in two directions, etc. Effects of various parameters on axial stiffness of CHS X-joints are examined by systematic single-parameter nonlinear analysis using shell finite element methods. The analysis is implemented in a finite element code, ANSYS. The observed trends form the basis of the formulae for calculating the joint axial stiffness under brace axial tension by multivariate regression technique. In order to simplify the formulae, two non-dimensional variables are introduced. The proposed formulae can be used to calculate the joint axial stiffness in the design of single-layer steel tubular structures.
Key words: Joint stiffness, Brace tension, Parametric analysis, Stiffness formula
References:
Open peer comments: Debate/Discuss/Question/Opinion
<1>
DOI:
10.1631/jzus.A1000022
CLC number:
TU392
Download Full Text:
Downloaded:
4517
Clicked:
7723
Cited:
4
On-line Access:
2024-08-27
Received:
2023-10-17
Revision Accepted:
2024-05-08
Crosschecked:
2011-01-07