Full Text:   <4211>

Summary:  <2123>

CLC number: TM351

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2016-07-13

Cited: 0

Clicked: 7473

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

He Hao

http://orcid.org/0000-0001-6376-9106

-   Go to

Article info.
Open peer comments

Frontiers of Information Technology & Electronic Engineering  2016 Vol.17 No.8 P.814-824

http://doi.org/10.1631/FITEE.1500238


Torque characteristics in a large permanent magnet synchronous generator with stator radial ventilating air ducts


Author(s):  He Hao, Wei-zhong Fei, Dong-min Miao, Meng-jia Jin, Jian-xin Shen

Affiliation(s):  College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China; more

Corresponding email(s):   w.fei@cranfield.ac.uk

Key Words:  Permanent magnet synchronous generator (PMSG), Radial ventilating air duct, Torque ripple, Step skewing, Magnet shape optimization, Finite element analysis, Wind power


He Hao, Wei-zhong Fei, Dong-min Miao, Meng-jia Jin, Jian-xin Shen. Torque characteristics in a large permanent magnet synchronous generator with stator radial ventilating air ducts[J]. Frontiers of Information Technology & Electronic Engineering, 2016, 17(8): 814-824.

@article{title="Torque characteristics in a large permanent magnet synchronous generator with stator radial ventilating air ducts",
author="He Hao, Wei-zhong Fei, Dong-min Miao, Meng-jia Jin, Jian-xin Shen",
journal="Frontiers of Information Technology & Electronic Engineering",
volume="17",
number="8",
pages="814-824",
year="2016",
publisher="Zhejiang University Press & Springer",
doi="10.1631/FITEE.1500238"
}

%0 Journal Article
%T Torque characteristics in a large permanent magnet synchronous generator with stator radial ventilating air ducts
%A He Hao
%A Wei-zhong Fei
%A Dong-min Miao
%A Meng-jia Jin
%A Jian-xin Shen
%J Frontiers of Information Technology & Electronic Engineering
%V 17
%N 8
%P 814-824
%@ 2095-9184
%D 2016
%I Zhejiang University Press & Springer
%DOI 10.1631/FITEE.1500238

TY - JOUR
T1 - Torque characteristics in a large permanent magnet synchronous generator with stator radial ventilating air ducts
A1 - He Hao
A1 - Wei-zhong Fei
A1 - Dong-min Miao
A1 - Meng-jia Jin
A1 - Jian-xin Shen
J0 - Frontiers of Information Technology & Electronic Engineering
VL - 17
IS - 8
SP - 814
EP - 824
%@ 2095-9184
Y1 - 2016
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/FITEE.1500238


Abstract: 
In this study, we investigated the torque characteristics of large low-speed direct-drive permanent magnet synchronous generators with stator radial ventilating air ducts for offshore wind power applications. magnet shape optimization was used first to improve the torque characteristics using two-dimensional finite element analysis (FEA) in a permanent magnet synchronous generator with a common stator. The rotor step skewing technique was then employed to suppress the impacts of mechanical tolerances and defects, which further improved the torque quality of the machine. Comprehensive three-dimensional FEA was used to evaluate accurately the overall effects of stator radial ventilating air ducts and rotor step skewing on torque features. The influences of the radial ventilating ducts in the stator on torque characteristics, such as torque pulsation and average torque in the machine with and without rotor step skewing techniques, were comprehensively investigated using three-dimensional FEA. The results showed that stator radial ventilating air ducts could not only reduce the average torque but also increase the torque ripple in the machine. Furthermore, the torque ripple of the machine under certain load conditions may even be increased by rotor step skewing despite a reduction in cogging torque.

有定子径向通风孔的大型永磁同步发电机的转矩特性

目的:针对应用于海上风电的大型低速直驱型永磁同步发电机,研究具有径向通风风道定子和分段斜极的转子对于电机转矩特性的影响。
创新点:利用二维和三维有限元分析,得到定子通风孔的存在对于电机转矩特性的影响,并且通过对永磁体结构和转子分段斜极的优化,得到其对电机转矩特性的影响,提高电机转矩性能,降低了对机械齿轮的要求。
方法:首先,考虑到大型直驱型永磁同步发电机采用的机械齿轮的机械忍耐性受到限制,因此减少电机的转矩脉动具有非常重要的意义,对于海上工作的风力发电机来说尤为如此。接着,针对现有风力发电机,在具有定子通风孔条件下提出了对于电机永磁体形状的优化,并通过二维和三维的有限云分析,得到了其对电机转矩特性的影响。然后,通过提出对电机转子的分段斜极的优化,同样利用二维和三维的有限元分析得到不同转子结构对电机转矩特性的影响。最后,通过分析比较得到不同结构对电机平均转矩、转矩脉动等的影响。
结论:针对大容量永磁同步发电机,我们发现定子通风孔不仅会降低电机的平均转矩,还会增加电机的转矩脉动,且电枢电流和转子分段斜极对减少电机的转矩脉动具有非常大的影响。

关键词:永磁同步发电机;径向通风孔;转矩脉动;分段斜极;磁体形状优化;有限元分析;风电

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Ashabani, M., Mohamed, Y.A.R.I., 2011. Multiobjective shape optimization of segmented pole permanent-magnet synchronous machines with improved torque characteristics. IEEE Trans. Magn., 47(4):795-804.

[2]Atallah, K., Wang, J., Howe, D., 2003. Torque-ripple minimization in modular permanent-magnet brushless machines. IEEE Trans. Ind. Appl., 39(6):1689-1695.

[3]Bianchi, N., Bolognani, S., 2002. Design techniques for reducing the cogging torque in surface-mounted PM motors. IEEE Trans. Ind. Appl., 38(5):1259-1265.

[4]Boukais, B., Zeroug, H., 2010. Magnet segmentation for commutation torque ripple reduction in a brushless DC motor drive. IEEE Trans. Magn., 46(11):3909-3919.

[5]Chen, H.S., Dorrell, D.G., Tsai, M.C., 2010. Design and operation of interior permanent-magnet motors with two axial segments and high rotor saliency. IEEE Trans. Magn., 46(9):3664-3675.

[6]Chen, N.N., Ho, S.L., Fu, W.N., 2010. Optimization of permanent magnet surface shapes of electric motors for minimization of cogging torque using FEM. IEEE Trans. Magn., 46(6):2478-2481.

[7]Chu, W.Q., Zhu, Z.Q., 2013. Reduction of on-load torque ripples in permanent magnet synchronous machines by improved skewing. IEEE Trans. Magn., 49(7):3822-3825.

[8]Fei, W.Z., Luk, P.C.K., 2009. An improved model for the back-EMF and cogging torque characteristics of a novel axial flux permanent magnet synchronous machine with a segmental laminated stator. IEEE Trans. Magn., 45(10):4609-4612.

[9]Fei, W.Z., Luk, P.C.K., 2010. A new technique of cogging torque suppression in direct-drive permanent-magnet brushless machines. IEEE Trans. Ind. Appl., 46(4):linebreak 1332-1340.

[10]Fei, W.Z., Luk, P.C.K., 2012. Torque ripple reduction of a direct-drive permanent-magnet synchronous machine by material-efficient axial pole pairing. IEEE Trans. Ind. Electron., 59(6):2601-2611.

[11]Fei, W.Z., Luk, P.C.K., Shen, J.X., 2012. Torque analysis of permanent-magnet flux switching machines with rotor step skewing. IEEE Trans. Magn., 48(10):2664-2673.

[12]Fei, W.Z., Luk, P.C.K., Wu, D., et al., 2013. Approximate three-dimensional finite element analysis of large permanent magnet synchronous generators with stator radial ventilating ducts. 39th Annual Conf. of IEEE Industrial Electronics Society, p.7313-7318.

[13]Güemes, J.A., Iraolagoitia, A.A., Del Hoyo, J.I., et al., 2011. Torque analysis in permanent-magnet synchronous motors: a comparative study. IEEE Trans. Energy Conv., 26(1):55-63.

[14]Han, S.H., Jahns, T.M., Soong, W.L., et al., 2010. Torque ripple reduction in interior permanent magnet synchronous machines using stators with odd number of slots per pole pair. IEEE Trans. Energy Conv., 25(1):118-127.

[15]Islam, M.S., Mir, S., Sebastian, T., et al., 2005. Design consideration of sinusoidally excited permanent-magnet machines for low-torque-ripple applications. IEEE Trans. Ind. Appl., 41(4):955-962.

[16]Islam, R., Husain, I., Fardoun, A., et al., 2009. Permanent-magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction. IEEE Trans. Ind. Appl., 45(1):152-160.

[17]Jahns, T.M., Soong, W.L., 1996. Pulsating torque minimization techniques for permanent magnet AC motor drives—a review. IEEE Trans. Ind. Electron., 43(2): 321-330.

[18]Lateb, R., Takorabet, N., Meibody-Tabar, F., 2006. Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors. IEEE Trans. Magn., 42(3):442-445.

[19]Li, T., Slemon, G., 1988. Reduction of cogging torque in permanent magnet motors. IEEE Trans. Magn., 24(6):2901-2903.

[20]Pang, Y., Zhu, Z.Q., Howe, D., 2005. Self-shielding magnetized vs. shaped parallel-magnetized PM brushless AC motors. KIEE Int. Trans. Electr. Mach. Energy Conv. Syst., 5-B(1):13-19.

[21]Pyrhonen, J., Ruuskanen, V., Nerg, J., et al., 2010. Permanent-magnet length effects in AC machines. IEEE Trans. Magn., 46(10):3783-3789.

[22]Ruuskanen, V., Nerg, J., Pyrhonen, J., 2011. Effect of lamination stack ends and radial cooling channels on no-load voltage and inductances of permanent-magnet synchronous machines. IEEE Trans. Magn., 47(11):4643-4649.

[23]Ruuskanen, V., Nerg, J., Niemelä, M., et al., 2013. Effect of radial cooling ducts on the electromagnetic performance of the permanent magnet synchronous generators with double radial forced air cooling for direct-driven wind turbines. IEEE Trans. Magn., 49(6):2974-2981.

[24]Sopanen, J., Ruuskanen, V., Nerg, J., et al., 2011. Dynamic torque analysis of a wind turbine drive train including a direct-driven permanent-magnet generator. IEEE Trans. Ind. Electron., 58(9):3859-3867.

[25]Tapia, J.A., Pyrhonen, J., Puranen, J., et al., 2013. Optimal design of large permanent magnet synchronous generators. IEEE Trans. Magn., 49(1):642-650.

[26]Wang, Y., Jin, M.J., Fei, W.Z., et al., 2010. Cogging torque reduction in permanent magnet flux-switching machines by rotor teeth axial pairing. IET Electr. Power Appl., 4(7):500-506.

[27]Yang, Y., Wang, X., Zhang, R., et al., 2006. The optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magnet motors. IEEE Trans. Magn., 42(4):1135-1138.

[28]Zhu, Z.Q., Howe, D., 2000. Influence of design parameters on cogging torque in permanent magnet machines. IEEE Trans. Energy Conv., 15(4):407-412.

[29]Zhu, Z.Q., Ruangsinchaiwanich, S., Ishak, D., et al., 2005. Analysis of cogging torque in brushless machines having nonuniformly distributed stator slots and stepped rotor magnets. IEEE Trans. Magn., 41(10):3910-3912.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE