Full Text:   <3028>

CLC number: TB126

On-line Access: 

Received: 2005-08-26

Revision Accepted: 2005-09-15

Crosschecked: 0000-00-00

Cited: 3

Clicked: 6220

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
1. Reference List
Open peer comments

Journal of Zhejiang University SCIENCE A 2005 Vol.6 No.12 P.1386-1393

http://doi.org/10.1631/jzus.2005.A1386


Electrode models in electrical impedance tomography


Author(s):  Wang M.

Affiliation(s):  Institute of Particle Science and Engineering, University of Leeds, LS2 9JT, UK

Corresponding email(s):   m.wang@leeds.ac.uk

Key Words:  Electrical impedance tomography (EIT), Electrochemistry, Electrode modelling


Wang M.. Electrode models in electrical impedance tomography[J]. Journal of Zhejiang University Science A, 2005, 6(12): 1386-1393.

@article{title="Electrode models in electrical impedance tomography",
author="Wang M.",
journal="Journal of Zhejiang University Science A",
volume="6",
number="12",
pages="1386-1393",
year="2005",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2005.A1386"
}

%0 Journal Article
%T Electrode models in electrical impedance tomography
%A Wang M.
%J Journal of Zhejiang University SCIENCE A
%V 6
%N 12
%P 1386-1393
%@ 1673-565X
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.A1386

TY - JOUR
T1 - Electrode models in electrical impedance tomography
A1 - Wang M.
J0 - Journal of Zhejiang University Science A
VL - 6
IS - 12
SP - 1386
EP - 1393
%@ 1673-565X
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.A1386


Abstract: 
This paper presents different views on electrode modelling, which include electrode electrochemistry models for modelling the effects of electrode-electrolyte interface, electric field electrode models for modelling electrode geometry, and electrode models for modelling the effects of electrode common mode voltage and double layer capacitance. Taking the full electrode models into consideration in electrical impedance tomography (EIT) will greatly help the optimised approach to a good solution and further understanding of the measurement principle.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1] Baber, D.C., Brown, B.H., 1984. Applied potential tomography. J. Phys. E: Sci. Instrum., 17:723-733.

[2] Bockris, J.O.M., Conway, B.E., 1969. Modern Aspects of Electrochemistry. Plenum Press, New York.

[3] Bockris, J.O.M., Reddy, A.K.N., 1970. Modern Electrochemistry. Macdonald, London.

[4] Bockris, J.O.M., Drazic, D.M., 1972. Electro-chemical Science. Taylor and Frabcis Ltd.

[5] Brown, B.H., Seagar, A.D., 1985. Applied Potential Tomography: Data Collection Problems. Proc. IEE Int. Conf. on Electric and Magnetic Field in Medic. and Biolo., p.79-82.

[6] Cheng, K., Isaacson, D., Newell, J.C., Gisser, D.C., 1989. Electrode models for electric current computed tomography. IEEE Trans. Biom. Engng., 36(9):918-924.

[7] Cobbold, R.S.C., 1974. Transducers for Boimedical Measurements: Principles and Applications. John Wiley & Sons.

[8] Conway, B.E., 1952. Electrochemistrical Data. Elsevier Publishing Company.

[9] Crow, D.R., 1974. Principles and Applications of Electrochemistry. Chapman and Hall, London.

[10] Geddes, L.A., Costa, C.P.D., Wise, G., 1971. The impedance of stainless-steel electrodes. Med. & Biol. Engng., 9:511-521.

[11] Hua, P., Woo, E.J., Webster, J.G., Tompkins, W.J., 1993. Using compound electrodes in electrical impedance tomography. IEEE Trans. Biomed. Eng., 40(1):29-34.

[12] Ider, Y.Z., Gencer, N.G., Altlar, E., Tosun, H., 1990. Electrical impedance tomography of translationally uniform cylidrical objects with general cross-sectional boundary. IEEE Trans. on Med. Imag., 9(1):49-59.

[13] Kraus, J.D., 1953. Electromagnetics. Book Company, Inc.

[14] Ma, Y., Wang, M., 2004. Performance of a High-speed Impedance Camera for Flow Informatics. Proceedings of EDSA04, ASME, Manchester.

[15] Murphy, D., Rolfe, P., 1988. Aspects of instrumentation design for impedance imaging. Clin. Phys. Physiol. Meas., 9(A):5-14.

[16] Murai, T., Kagawa, Y., 1985. Electrical impedance computed tomography based on a finite element model. IEEE Trans. Biomed. Eng., BME-32(3):177-184.

[17] Myers, D.F., Saville, D.A., 1989. Dielectric spectroscopy of colloidal suspensions. J. Colloid and Interface Science, 131(2):448-460.

[18] Pidcock, M.K., 1994. Analysing the Importance of Electrode modelling in Electrical Impedance Tomography. In: Beck, M.S., Campogrande, E., Morris, M., Williams, R.A., Waterfall, R.C.(Eds.), Process Tomography—A Strategy for Industrial Exploitation. UMIST, Manchester, UK, p.285-290.

[19] Pollak, V., 1974a. An equivalent diagram for the interface impedance of metal needle electrodes. Med. and Biolo. Engng., July:454-459.

[20] Pollak, V., 1974b. Computation of the impedance characteristic of metal electrodes for biological investigations. Med. and Biolo. Engng., July:460-464.

[21] Schwan, H.P., Ferris, C.D., 1968. Four-electrode null techniques for impedance measurement with high resolution. The Review of Scientific Instruments, 39(4):481-485.

[22] Vauhkonen, P.J., Vauhkonen, M., Savolainen, T., Kaipio, P., 1999. Three-dimensional electrical impedance tomography based on the complete electrode model. IEEE Trans. Biomed. Eng., 46(9):1150-1160.

[23] Wang, M., 1994. Electrical Impedance Tomography n Conducting Walled Process Vessels. Ph.D Thesis, UMIST.

[24] Wang, M., Ma, Y.X., 2005. Over Zero Switching Scheme for Fast Data Collection Operation in Electrical Impedance Tomography. Proceedings of 4th World Congress on Industrial Process Tomography, Ajzu, Japan.

[25] Wang, M., Dickin, F.J., Beck, M.S., 1993. Improved Electrical Impedance Tomography Data Collection System and Measurement Protocols. In: Beck, M.S., Campogrande, E., Morris, M., Williams, R.A., Waterfall, R.C.(Eds.), Tomography Technique and Process Design and Operation. Computational Mechanics Publications, Manchester, p.75-88.

[26] Wang, M., Dickin, F.J., Williams, R.A., 1994. Electrical resistance tomography of metal walled vessels and pipelines. Electronics Letters, 30(10):771-773.

[27] Wang, M., Dickin, F.J., Williams, R.A., 1995a. Modelling and analysis of electrically conducting vessels and pipelines in electrical resistance process tomography. IEE Proc. Sci. Meas. Technol., 142(4):313-322.

[28] Wang, M., Dickin, F.J., Williams, R.A., 1995b. The grouped node technique as a means of handling large electrode surfaces in electrical impedance tomography. Physiol. Meas., 16:219-226.

[29] Wang, M., Mann, R., Dickin, F.J., 1999. Electrical resistance tomographic sensing systems for industrial applications. Chem. Eng. Comm., 175:49-70.

[30] Wang, M., Ma, Y., Holliday, N., Dai, Y., Williams, R.A., Lucas, G., 2005. A high performance EIT system. IEEE Sensors Journal, 5(2):289-299.

[31] Weinman, J., Mahler, J., 1964. An analysis of electrical properties of metal electrodes. Med. Electron. Biod. Engng., 2:299-310.

[32] Yorkey, T.J., Webster, J.G., Tompkins, W.J., 1985. Errors Caused by Contact Impedance in Impedance Imaging. Proc. IEEE/Seventh Ann. Conf. Eng. Med. Biol. Soc., p.632-637.

[33] Yorkey, T.J., Webster, J.G., Tompkins, W.J., 1987. Comparing reconstruction algorithm for electrical impedance tomography. IEEE Trans. Biomed. Eng., Nov., BME-34(11):843-851.

[34] Zhou, P., 1993. Numerical Analysis of Electriomagnetic Fields. Springer-Verlag, Berlin, Heidelberg.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Sayed@Dhaka University<parphyfield@yahoo.com>

2013-07-01 17:31:12

Dear sir

I have been working on Electical Bioimpedance at the Department of Biomedical Physics and Technology and requesting for this full paper.

Thanks in advance.

VENKATA REDDY K@No address<kopparthi.v@gmail.com>

2011-11-11 15:02:47

i want this paper for knowing about the electrical impedance tomography

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2022 Journal of Zhejiang University-SCIENCE