CLC number: V249.1
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 2019-11-05
Cited: 0
Clicked: 5894
Hai-dong Shen, Rui Cao, Yan-bin Liu, Fei-teng Jin, Yu-ping Lu. Control-oriented low-speed dynamic modeling and trade-off analysis of air-breathing aerospace vehicles[J]. Journal of Zhejiang University Science A, 2019, 20(12): 893-907.
@article{title="Control-oriented low-speed dynamic modeling and trade-off analysis of air-breathing aerospace vehicles",
author="Hai-dong Shen, Rui Cao, Yan-bin Liu, Fei-teng Jin, Yu-ping Lu",
journal="Journal of Zhejiang University Science A",
volume="20",
number="12",
pages="893-907",
year="2019",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1900366"
}
%0 Journal Article
%T Control-oriented low-speed dynamic modeling and trade-off analysis of air-breathing aerospace vehicles
%A Hai-dong Shen
%A Rui Cao
%A Yan-bin Liu
%A Fei-teng Jin
%A Yu-ping Lu
%J Journal of Zhejiang University SCIENCE A
%V 20
%N 12
%P 893-907
%@ 1673-565X
%D 2019
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1900366
TY - JOUR
T1 - Control-oriented low-speed dynamic modeling and trade-off analysis of air-breathing aerospace vehicles
A1 - Hai-dong Shen
A1 - Rui Cao
A1 - Yan-bin Liu
A1 - Fei-teng Jin
A1 - Yu-ping Lu
J0 - Journal of Zhejiang University Science A
VL - 20
IS - 12
SP - 893
EP - 907
%@ 1673-565X
Y1 - 2019
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1900366
Abstract: We present a control-oriented low-speed dynamic modeling and trade-off study framework for a conceptual air-breathing horizontal take-off and horizontal landing (HTHL) aerospace vehicle, which is powered by a turbinebased combined cycle engine. First, the 3D class/shape transformation method is modified to enhance the continuity property between different blocks, combined with the power function. Then, the panel method based on potential theory is employed to calculate the pressure distribution over discretized panel surfaces, resulting in the aerospace vehicle’s aerodynamic coefficients. To overcome the intractability of the physics-based model, stepwise regression analysis is adopted and simplified polynomials of aerodynamic coefficients are evaluated. Finally, stability and control analysis is conducted, aiming to find the proper center-of-gravity locations under different constraints. The proposed framework is verified through a conceptual aerospace vehicle simulation, with emphasis on horizontal take-off rotation and landing nose hold-off capabilities. Simulation results indicate that the proposed framework is capable of rapid control-oriented dynamic modeling and iterative design of HTHL aerospace vehicles.
The manuscript that you present is well structured and contextualizes your work in an appropriate fashion. The discussion is clear and concise yet, at the same time, achieves to inform the reader about the complexity and amount of work put in place to carry out this research.
[1]Anderson JD, 2010. Fundamentals of Aerodynamics. McGraw-Hill, New York, USA.
[2]Bowcutt K, 2003. A perspective on the future of aerospace vehicle design. Proceedings of the 12th AIAA International Space Planes and Hypersonic Systems and Technologies, Article 6957.
[3]Bradford JE, Charanja A, Wallace J, et al., 2004. Quicksat: a two stage to orbit reusable launch vehicle utilizing air breathing propulsion for responsive space access. Proceedings of Space 2004 Conference and Exhibit, Article 5950.
[4]Chen BY, Liu YB, Shen HD, et al., 2017. Surrogate modeling of a 3D scramjet-powered hypersonic vehicle based on screening method IFFD. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231(2):265-278.
[5]Cummings RM, Mason WH, Morton SA, et al., 2015. Applied Computational Aerodynamics: a Modern Engineering Approach. Cambridge University Press, New York, USA.
[6]Erickson LL, 1990. Panel Methods: an Introduction. NASATP- 2995, NASA, Washington, USA.
[7]Fernández-Villacé V, Paniagua G, Steelant J, 2014. Installed performance evaluation of an air turbo-rocket expander engine. Aerospace Science and Technology, 35:63-79.
[8]Gur O, Mason WH, Schetz JA, 2010. Full-configuration drag estimation. Journal of Aircraft, 47(4):1356-1367.
[9]Hellman BM, Bradford J, St. Germain B, et al., 2016. Two stage to orbit conceptual vehicle designs using the SABRE engine. Proceedings of AIAA SPACE, Article 5320.
[10]Jazra T, Smart M, 2009. Development of an aerodynamics code for the optimisation of hypersonic vehicles. Proceedings of the 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Article 1475.
[11]Katz J, Plotkin A, 2001. Low-speed Aerodynamics (2nd Edition). Cambridge University Press, Cambridge, UK.
[12]Kokan T, Olds JR, Hutchinson V, et al., 2004. Aztec: a TSTO hypersonic vehicle concept utilizing TBCC and HEDM propulsion technologies. Proceedings of the 40th AIAA/ASME/ SAE/ASEE Joint Propulsion Conference and Exhibit, Article 3728.
[13]Kulfan BM, 2008. Universal parametric geometry representation method. Journal of Aircraft, 45(1):142-158.
[14]Liao L, Yan L, Huang W, et al., 2018. Mode transition process in a typical strut-based scramjet combustor based on a parametric study. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 19(6):431-451.
[15]Liu CZ, Duan YH, Cai JS, et al., 2016. Application of the 3D multi-block CST method to hypersonic aircraft optimization. Aerospace Science and Technology, 50:295- 303.
[16]Lobbia MA, 2017. Rapid supersonic/hypersonic aerodynamics analysis model for arbitrary geometries. Journal of Spacecraft and Rockets, 54(1):315-322.
[17]Longo JMA, Dittrich R, Banuti D, et al., 2009. Concept study for a Mach 6 transport aircraft. Proceedings of the 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Article 435.
[18]Ma JX, Chang JT, Ma JC, et al., 2018. Mathematical modeling and characteristic analysis for over-under turbine based combined cycle engine. Acta Astronautica, 148:141-152.
[19]Mattingly JD, 1996. Elements of Gas Turbine Propulsion. McGraw-Hill, New Delhi, India.
[20]Mattingly JD, Heiser WH, Pratt DT, 2002. Aircraft Engine Design. American Institute of Aeronautics and Astronautics, Reston, USA.
[21]McDaniel JC, Chelliah H, Goyne C, et al., 2009. US national center for hypersonic combined cycle propulsion: an overview. Proceedings of the 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, Article 7280.
[22]Mehta U, Aftosmis M, Bowles J, et al., 2016. Skylon aerospace plane and its aerodynamics and plumes. Journal of Spacecraft and Rockets, 53(2):340-353.
[23]Moses PL, Bouchard KA, Vause RF, et al., 1999. An airbreathing launch vehicle design with turbine-based lowspeed propulsion and dual mode scramjet high-speed propulsion. Proceedings of the 9th International Space Planes and Hypersonic Systems and Technologies Conference, Article 4948.
[24]Piscitelli F, Cutrone L, Pezzella G, et al., 2017. Nose-to-tail analysis of an airbreathing hypersonic vehicle using an in-house simplified tool. Acta Astronautica, 136:148-158.
[25]Raymer DP, 2018. Aircraft Design: a Conceptual Approach (6th Edition). American Institute of Aeronautics and Astronautics, Reston, USA.
[26]Roncioni P, Natale P, Marini M, et al., 2015. Numerical simulations and performance assessment of a scramjet powered cruise vehicle at Mach 8. Aerospace Science and Technology, 42:218-228.
[27]Shen HD, Liu YB, Chen BY, et al., 2018. Control-relevant modeling and performance limitation analysis for flexible air-breathing hypersonic vehicles. Aerospace Science and Technology, 76:340-349.
[28]Spoth KA, Moses PL, 1993. Structural design and analysis of a Mach zero to five turbo-ramjet system. Proceedings of the 29th Joint Propulsion Conference and Exhibit, Article 1983.
[29]Stueber TJ, Vrnak DR, Le DK, et al., 2010. Control Activity in Support of NASA Turbine Based Combined Cycle (TBCC) Research. NASA/TM-2010-216109, E-17192, NASA, CA, USA.
[30]Sziroczak D, Smith H, 2016. A review of design issues specific to hypersonic flight vehicles. Progress in Aerospace Sciences, 84:1-28.
[31]Tsuchiya T, Mori T, 2005. Optimal design of two-stage-toorbit space planes with airbreathing engines. Journal of Spacecraft and Rockets, 42(1):90-97.
[32]Walker S, Tang M, Mamplata C, 2009. TBCC propulsion for a Mach 6 hypersonic airplane. Proceedings of the 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, Article 7238.
[33]Zhang TT, Wang ZG, Huang W, et al., 2016a. Parameterization and optimization of hypersonic-gliding vehicle configurations during conceptual design. Aerospace Science and Technology, 58:225-234.
[34]Zhang TT, Huang W, Wang ZG, et al., 2016b. A study of airfoil parameterization, modeling, and optimization based on the computational fluid dynamics method. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 17(8):632-645.
[35]Zhang TT, Wang ZG, Huang W, et al., 2018. A review of parametric approaches specific to aerodynamic design process. Acta Astronautica, 145:319-331.
[36]Zhang TT, Wang ZG, Huang W, et al., 2019. The overall layout of rocket-based combined-cycle engines: a review. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 20(3):163-183.
[37]Zhao ZT, Huang W, Yan L, et al., 2019. Low speed aerodynamic performance analysis of vortex lift waveriders with a wide-speed range. Acta Astronautica, 161:209- 221.
[38]Zhou JX, Lu H, Zhang HC, et al., 2017. A preliminary research on a two-stage-to-orbit vehicle with airbreathing pre-cooled hypersonic engines. Proceedings of the 21st AIAA International Space Planes and Hypersonics Technologies Conference, Article 2343.
Open peer comments: Debate/Discuss/Question/Opinion
<1>