Abstract: A pseudo-dynamic testing program was generated on a fabricated composite frame with steel plate shear walls (SPSWs) to study its seismic performance. The specimen was a three-storey single-bay frame, which was composed of H-section steel columns and composite beams, and was assembled by bolted height-adjustable steel beam-to-column connections (BHA connections). Beam-only-connected SPSWs were selected as lateral load resisting members. The specimen was subjected to four ground motions of progressively increasing intensity. The results showed that: (1) beam-only-connected SPSWs provided sufficient lateral load resistance, lateral stiffness, and energy dissipation capacity to the fabricated frame via the tension field action developed in their infill panels; (2) the fabricated frame, assembled by BHA connections, exhibited substantial redundancy and good ductility; (3) an undesirable failure mode of the fabricated frame, in huge earthquakes, included severe cracking in composite beams and block shear failure in SPSWs’ connections; (4) the inter-storey shear force distribution determined by ASCE/SEI 7-10 was verified with experimental data.

装配式钢板剪力墙-组合框架结构伪动力试验研究

[1]AISC (American Institute of Steel Construction), 2010. Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-10. AISC, USA.

[2]ASCE (American Society of Civil Engineers), 2010. Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10. ASCE, USA.

[3]Cao, Z.Z., Du, P., Li, J.D., et al., 2015. Research on mechanical performance of bolted height adjustable steel beam-to-column connections under low cycle reversed loading. Journal of Building Structures, 36(4):1-8 (in Chinese).

[4]Clayton, P., Winkley, T., Berman, J., et al., 2012a. Experimental investigation of self-centering steel plate shear walls. Journal of Structural Engineering, 138(7):952-960.

[5]Clayton, P., Berman, J., Lowes, L., 2012b. Seismic design and performance of self-centering steel plate shear walls. Journal of Structural Engineering, 138(1):22-30.

[6]Dowden, D., Purba, R., Bruneau, M., 2012. Behavior of self-centering steel plate shear walls and design considerations. Journal of Structural Engineering, 138(1):11-21.

[7]Driver, R., Kulak, G., Kennedy, D., et al., 1998. Cyclic test of four-storey steel plate shear wall. Journal of Structural Engineering, 124(2):112-120.

[8]Guo, L.H., Rong, Q., Ma, X.B., et al., 2011. Behavior of steel plate shear wall connected to frame beams only. International Journal of Steel Structures, 11(4):467-479.

[9]Kulkarni, S.A., Li, B., Yip, W.K., 2008. Finite element analysis of precast hybrid-steel concrete connections under cyclic loading. Journal of Constructional Steel Research, 64(2):190-201.

[10]Li, B., Kulkarni, S.A., Leong, C.L., 2009. Seismic performance of precast hybrid-steel concrete connections. Journal of Earthquake Engineering, 13(5):667-689.

[11]Lin, C.H., Tsai, K.C., Qu, B., et al., 2010. Sub-structural pseudo-dynamic performance of two full-scale two-storey steel plate shear walls. Journal of Constructional Steel Research, 66(12):1467-1482.

[12]Liu, C., Wang, Q., Wang, Y., et al., 2013. Flexural behavior of precast reinforced concrete beams with steel end connectors. Journal of Building Structures, 34(S1):208-214 (in Chinese).

[13]Lubell, A., Prion, H., Ventura, C., et al., 2000. Unstiffened steel plate shear wall performance under cyclic loading. Journal of Structural Engineering, 126(4):453-460.

[14]MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China), 1999. Steel and Steel Products―Location and Preparation of Test Pieces for Mechanical Testing, GB/T 2975-1998. MOHURD (in Chinese).

[15]MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China), 2010. Code for Seismic Design of Buildings, GB50011-2010. MOHURD (in Chinese).

[16]MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China), 2011. Metallic Materials-Tensile Testing―Part 1: Method of Test at Room Temperature, GB/T 228.1-2010. MOHURD (in Chinese).

[17]MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China), 2015. Specification for Seismic Test of Buildings, JGJ/T 101-2015. MOHURD (in Chinese).

[18]MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China), 2016. Technical Specification for Steel Plate Shear Walls, JGJ/T 380-2015. MOHURD (in Chinese).

[19]Qu, B., Bruneau, M., Lin, C., et al., 2008. Testing of full-scale two-storey steel plate shear wall with reduced beam section connections and composite floors. Journal of Structural Engineering, 134(3):364-373.

[20]Thorburn, L.J., Kulak, G.L., Montgomery, C.J., 1983. Analysis of Steel Plate Shear Walls. Structural Engineering Report No. 107. Department of Civil Engineering, the University of Alberta, Canada. Available from www.civil.ualberta.ca/structures/reports/SER107Thorburn,Kulak,andMontgomery.pdf.

[21]Xue, M., Lu, L.W., 1994. Monotonic and cyclic behavior of infilled steel shear panels. 17th Czech and Slovak International Conference on Steel Structures and Bridges, p.152-160.

[22]Yang, K.H., Oh, M.H., Kim, M.H., et al., 2010. Flexural behavior of hybrid precast concrete beams with H-steel beams at both ends. Engineering Structures, 32(9):2940-2949.