Abstract: Marine power-generation diesel engines operate in harsh environments. Their vibration signals are highly complex and the feature information exhibits a non-linear distribution. It is difficult to extract effective feature information from the network model, resulting in low fault-diagnosis accuracy. To address this problem, we propose a fault-diagnosis method that combines the Gramian angular field (GAF) with a convolutional neural network (CNN). Firstly, the vibration signals are transformed into 2D images by taking advantage of the GAF, which preserves the temporal correlation. The raw signals can be mapped to 2D image features such as texture and color. To integrate the feature information, the images of the Gramian angular summation field (GASF) and Gramian angular difference field (GADF) are fused by the weighted average fusion method. Secondly, the channel attention mechanism and temporal attention mechanism are introduced in the CNN model to optimize the CNN learning mechanism. Introducing the concept of residuals in the attention mechanism improves the feasibility of optimization. Finally, the weighted average fused images are fed into the CNN for feature extraction and fault diagnosis. The validity of the proposed method is verified by experiments with abnormal valve clearance. The average diagnostic accuracy is 98.40%. When -‍20 dB≤signal-to-noise ratio (SNR)≤20 dB, the diagnostic accuracy of the proposed method is higher than 94.00%. The proposed method has superior diagnostic performance. Moreover, it has a certain anti-noise capability and variable-load adaptive capability.

基于格拉姆角场和卷积神经网络的船用发电柴油机故障诊断

[1]AlsalaetJK, HajnayebA, BahedhAS, 2023. Bearing fault diagnosis using normalized diagnostic feature-gram and convolutional neural network. Measurement Science and Technology, 34(4):045901.

[2]CaiBP, SunXT, WangJX, et al., 2020. Fault detection and diagnostic method of diesel engine by combining rule-based algorithm and BNs/BPNNs. Journal of Manufacturing Systems, 57:148-157.

[3]CerradaM, ZuritaG, CabreraD, et al., 2016. Fault diagnosis in spur gears based on genetic algorithm and random forest. Mechanical Systems and Signal Processing, 70-71:87-103.

[4]CuiJL, ZhongQW, ZhengSB, et al., 2022. A lightweight model for bearing fault diagnosis based on Gramian angular field and coordinate attention. Machines, 10(4):282.

[5]DhamandeLS, ChaudhariMB, 2016. Bearing fault diagnosis based on statistical feature extraction in time and frequency domain and neural network. International Journal of Vehicle Structures and Systems, 8(4):229-240.

[6]DuJF, LiXY, GaoYP, et al., 2022. Integrated gradient-based continuous wavelet transform for bearing fault diagnosis. Sensors, 22(22):8760.

[7]FuWL, JiangXH, LiBL, et al., 2023. Rolling bearing fault diagnosis based on 2D time-frequency images and data augmentation technique. Measurement Science and Technology, 34(4):045005.

[8]GouLF, LiHH, ZhengH, et al., 2020. Aeroengine control system sensor fault diagnosis based on CWT and CNN. Mathematical Problems in Engineering, 2020:5357146.

[9]GroverC, TurkN, 2022. A novel fault diagnostic system for rolling element bearings using deep transfer learning on bispectrum contour maps. Engineering Science and Technology, an International Journal, 31:101049.

[10]HajnayebA, 2021. Cavitation analysis in centrifugal pumps based on vibration bispectrum and transfer learning. Shock and Vibration, 2021:6988949.

[11]HeY, TangHS, RenY, et al., 2022. A deep multi-signal fusion adversarial model based transfer learning and residual network for axial piston pump fault diagnosis. Measurement, 192:110889.

[12]HoangDT, KangHJ, 2019. A survey on deep learning based bearing fault diagnosis. Neurocomputing, 335:327-335.

[13]HouSZ, GuoW, WangZQ, et al., 2022. Deep-learning-based fault type identification using modified CEEMDAN and image augmentation in distribution power grid. IEEE Sensors Journal, 22(2):1583-1596.

[14]HuJ, YuYH, YangJG, et al., 2023. Research on the generalisation method of diesel engine exhaust valve leakage fault diagnosis based on acoustic emission. Measurement, 210:112560.

[15]KaratuğÇ, ArslanoğluY, 2022. Development of condition-based maintenance strategy for fault diagnosis for ship engine systems. Ocean Engineering, 256:111515.

[16]ManarikkalI, ElashaF, MbaD, 2021. Diagnostics and prognostics of planetary gearbox using CWT, auto regression (AR) and K-means algorithm. Applied Acoustics, 184:108314.

[17]NayanaBR, GeethanjaliP, 2017. Analysis of statistical time-domain features effectiveness in identification of bearing faults from vibration signal. IEEE Sensors Journal, 17(17):5618-5625.

[18]PanJH, QuLL, PengKX, 2021. Sensor and actuator fault diagnosis for robot joint based on deep CNN. Entropy, 23(6):751.

[19]PengDD, WangH, LiuZL, et al., 2020. Multibranch and multiscale CNN for fault diagnosis of wheelset bearings under strong noise and variable load condition. IEEE Transactions on Industrial Informatics, 16(7):4949-4960.

[20]QianCH, ZhuJJ, ShenYH, et al., 2022. Deep transfer learning in mechanical intelligent fault diagnosis: application and challenge. Neural Processing Letters, 54(3):2509-2531.

[21]RaoX, ShengCX, GuoZW, et al., 2022. A review of online condition monitoring and maintenance strategy for cylinder liner-piston rings of diesel engines. Mechanical Systems and Signal Processing, 165:108385.

[22]RenHR, LiaoXJ, LiZW, et al., 2018. Anomaly detection using piecewise aggregate approximation in the amplitude domain. Applied Intelligence, 48(5):1097-1110.

[23]RenK, ZhangDW, WanMJ, et al., 2021. An infrared and visible image fusion method based on improved DenseNet and mRMR-ZCA. Infrared Physics & Technology, 115:103707.

[24]SchmidhuberJ, 2015. Deep learning in neural networks: an overview. Neural Networks, 61:85-117.

[25]SenanayakaJSL, van KhangH, RobbersmyrKG, 2019. Multiple classifiers and data fusion for robust diagnosis of gearbox mixed fault. IEEE Transactions on Industrial Informatics, 15(8):4569-4579.

[26]SongRW, YuBQ, ShiH, et al., 2023. Support vector machine fault diagnosis based on sparse scaling convex hull. Measurement Science and Technology, 34(3):035101.

[27]SunF, XuH, ZhaoYH, et al., 2022. Data-driven fault diagnosis of control valve with missing data based on modeling and deep residual shrinkage network. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):303-313.

[28]TianHX, LiRJ, YangLZ, 2022. Operation status monitoring of reciprocating compressors based on the fusion of spatio-temporal multiple information. Measurement, 204:112087.

[29]WangB, LeiYG, LiNP, et al., 2021. Multiscale convolutional attention network for predicting remaining useful life of machinery. IEEE Transactions on Industrial Electronics, 68(8):7496-7504.

[30]WenL, LiXY, GaoL, 2020. A transfer convolutional neural network for fault diagnosis based on ResNet-50. Neural Computing and Applications, 32(10):6111-6124.

[31]XieJS, LinMQ, YangBY, et al., 2023. A novel bearing fault diagnosis method under small samples using time-frequency multi-scale convolution layer and hybrid attention mechanism module. Measurement Science and Technology, 34(9):095121.

[32]XuYD, YanXA, FengK, et al., 2022. Attention-based multiscale denoising residual convolutional neural networks for fault diagnosis of rotating machinery. Reliability Engineering & System Safety, 226:108714.

[33]ZhaoR, YanRQ, ChenZH, et al., 2019. Deep learning and its applications to machine health monitoring. Mechanical Systems and Signal Processing, 115:213-237.