References
[1] Boedo, S., Booker, J.F., 2004. Classical bearing misalignment and edge loading: a numerical study of limiting cases.
Journal of Tribology, 126(3):535-541.
![](./images/crossref.bmp)
[2] Bouyer, J., Fillon, M., 2002. An experimental analysis of misalignment effects on hydrodynamic plain journal bearing performances.
Journal of Tribology, 124(2):313-319.
![](./images/crossref.bmp)
[3] Bousaid, B., Chaomleffel, J.P., 1987. Influence du mésalignement sur les caractéristiques dynamiques des paliers à lobes.
Journal of Theoretical and Applied Mechanics, (in French),6:409-421.
[4] Buckholz, R.H., Lin, J.F., 1986. The effect of journal bearing misalignment on load and cavitation for non-Newtonian lubricants.
Journal of Tribology, 108(4):645-654.
[5] Das, S., Guha, S.K., Chattopadhyay, A.K., 2002. On the steady-state performance of misaligned hydrodynamic journal bearings lubricated with micropolar fluids.
Tribology International, 35(4):201-210.
![](./images/crossref.bmp)
[6] Dubois, G.B., Ocvirk, F.W., Wehe, R.L., 1957. Properties of misaligned journal bearing.
Transactions of the ASME, 79:1205-1212.
[7] Elrod, H.G., 1981. A cavitation algorithm.
Journal of Lubrication Technology, 103(3):350-354.
[8] Etsion, I., Ludwig, L.P., 1982. Observation of pressure varitation in the cavitation region of submerged journal bearings.
Journal of Lubrication Technology, 104(2):157-163.
[9] Guha, S.K., 2000. Analysis of steady-state characteristic of misaligned hydrodynamic journal bearing with isotropic roughness effect.
Tribology International, 33(1):1-12.
![](./images/crossref.bmp)
[10] Harp, S.R., 2000. A Computational Method for Evaluating Cavitation Flow between Rough Surfaces. PhD Thesis, Georgia Institute of Technology,Atlanta, USA :
[11] Harp, S.R., Salant, R.F., 2001. An average flow model of rough surface lubrication with inter-asperity cavitation.
Journal of Tribology, 123(1):134-143.
![](./images/crossref.bmp)
[12] Harp, S.R., Salant, R.F., 2002. Inter-asperity cavitation and global cavitation in seals: an average flow analysis.
Tribology International, 35(2):113-121.
![](./images/crossref.bmp)
[13] He, Z.P., Zhang, J.H., Xie, W.S., Li, Z., Zhang, G.C., 2012. Misalignment analysis of journal bearing influenced by asymmetric deflection, based on a simple stepped shaft model.
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 13(9):647-664.
![](./images/crossref.bmp)
[14] Jakobsson, B., Floberg, L., 1957. The Finite Journal Bearing Considering Vaporization. Technical Report No. 190. Transactions of Chalmers University of Technology,Guthenberg :
[15] Jang, J.Y., Khonsari, M.M., 2010. On the behavior of misaligned journal bearings based on mass-conservative thermo-hydrodynamic analysis.
Journal of Tribology, 132(1):011702
![](./images/crossref.bmp)
[16] McKee, S.A., McKee, T.R., 1957. Pressure distribution in the oil film of journal bearings.
Transactions of the ASME, 54:149-165.
[17] Nikolakopoulos, P.G., Papadopoulos, C.A., 1994. Non-linearities in misaligned journal bearings.
Tribology International, 27(4):243-257.
![](./images/crossref.bmp)
[18] Nikolakopoulos, P.G., Papadopoulos, C.A., 1997. Dynamic stability of linear misaligned journal bearings via Lyapunov’s direct method.
Tribology transactions, 40(1):138-146.
![](./images/crossref.bmp)
[19] Nikolakopoulos, P.G., Papadopoulos, C.A., 2008. A study of friction in worn misaligned journal bearings under severe hydrodynamic lubrication.
Tribology International, 41(6):461-472.
![](./images/crossref.bmp)
[20] Patir, N., Cheng, H.S., 1978. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication.
Journal of Lubrication Technology, 100(1):12-17.
[21] Payvar, P., Salant, R.F., 1992. A computational method for cavitation in a wavy mechanical seal.
Journal of Tribology, 114(1):199-204.
[22] Pierre, I., Bouyer, J., Fillon, M., 2002. Thermohydrodynamic Study of Misaligned Plain Journal Bearings- Comparison between Experimental Data and Theoretical Results.
, Proceedings of the 2nd World Tribology Congress, 1-4. :1-4.
[23] Pierre, I., Bouyer, J., Fillon, M., 2004. Thermohydrodynamic behavior of misaligned plain journal bearings: theoretical and experimental approaches.
STLE Tribology Transactions, 47:594-604.
![](./images/crossref.bmp)
[24] Sun, J., Gui, C.L., 2004. Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformation.
Tribology International, 37(10):841-848.
![](./images/crossref.bmp)
[25] Sun, J., Gui, C.L., Li, Z.Y., 2005. Influence of journal misalignment caused by shaft deformation under rotational load on performance of journal bearing.
Proceedings of Institution Mechanical Engineer, Part J: Journal of Engineering Tribology, 219(4):275-283.
![](./images/crossref.bmp)
[26] Sun, J., Gui, C.L., Li, Z.Y., 2005. An experimental study of journal bearing lubrication effected by journal misalignment as a result of shaft deformation under load.
Journal of Tribology, 127(4):813-819.
![](./images/crossref.bmp)
[27] Sun, J., Deng, M., Fu, Y.H., Gui, C.L., 2010. Thermohydrodynamic lubrication analysis of misaligned plain journal bearing with rough surface.
Journal of Tribology, 132(1):011704
![](./images/crossref.bmp)
[28] Vijayaraghavan, D., 1989.
New Concept in Numerical Prediction of Cavitation in Bearing, PhD Thesis, the University of Toledo,:
[29] Wang, Y.S., Zhang, C., Wang, Q.J., Lin, C., 2002. A mixed-TEHD analysis and experiment of journal bearings under severe operating conditions.
Tribology International, 35(6):395-407.
![](./images/crossref.bmp)
Open peer comments: Debate/Discuss/Question/Opinion
<1>