Similar articles

Abstract: Hydraulic erecting systems are widely used in missile and rocket launchers because of their high power density. The double-acting telescopic hydraulic cylinder (DATHC) plays a decisive role in the safe and proper operation of such systems. In particular, improper design of effective areas of a DATHC could potentially lead to an overspeed descent with severe damage for the erecting system. Unfortunately, there is no design constraint for DATHC to prevent this. Therefore, in this paper, a simplified and practical design constraint is proposed. Based on a developed mathematical model of a typical erecting system, we simulated and analyzed not only six cases meeting and not meeting the design constraint, but also the effectiveness of the design constraint under different loads. Experiments were then carried out under four cases. Simulation and experimental results validate the simplified design constraint, a constraint inequation guiding the design of diameters of effective areas for a DATHC.

液压起竖系统双作用伸缩液压缸的设计准则研究

[1]BakMK, HansenMR, 2013. Model based design optimization of operational reliability in offshore boom cranes. International Journal of Fluid Power, 14(3):53-65.

[2]ChengM, XuB, ZhangJH, et al., 2017. Valve-based compensation for controllability improvement of the energy-saving electrohydraulic flow matching system. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 18(6):430-442.

[3]GaoQH, 2004. Study on electrohydraulic proportion control in large-sized mechanism erecting process. Chinese Journal of Mechanical Engineering, 40(2):189-192 (in Chinese).

[4]GuptaSK, PrakashJ, KankarPK, 2020. Buckling load for telescopic cylinder using successive approximation method. Indian Journal of Engineering and Materials Sciences (IJEMS), 27(4):853-859.

[5]HouJY, ZhangZM, NingDY, et al., 2017. Model-based position tracking control of a hose-connected hydraulic lifting system. Flow Measurement and Instrumentation, 53:286-292.

[6]LgritskaiaA, ZabegaevA, ZverevV, et al., 2021. A method for reducing dynamic loads during switching stages of multistage hydraulic cylinders of launch vehicles rising drive. AIP Conference Proceedings, 2318:100013.

[7]LiCL, SuM, XieZP, 2015. Extreme research on the order motion of the hoisting two-stage hydraulic cylinder. Applied Mechanics and Materials, 727-728:430-434.

[8]LinTL, LinYZ, RenHL, et al., 2021. A double variable control load sensing system for electric hydraulic excavator. Energy, 223:119999.

[9]MachadoM, MoreiraP, FloresP, et al., 2012. Compliant contact force models in multibody dynamics: evolution of the Hertz contact theory. Mechanism and Machine Theory, 53:99-121.

[10]ParkCG, YooS, AhnH, et al., 2020. A coupled hydraulic and mechanical system simulation for hydraulic excavators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 234(4):527-549.

[11]PrakashJ, GuptaSK, KankarPK, 2020. An analytical approach to evaluate the maximum load carrying capacity for pin-mounted telescopic hydraulic cylinder. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(19):3919-3934.

[12]RitelliGF, VaccaA, 2013. Energetic and dynamic impact of counterbalance valves in fluid power machines. Energy Conversion and Management, 76:701-711.

[13]SAMR (State Administration for Market Regulation), 2018. Fluid Power Systems and Components—Cylinder Bores and Piston Rod Diameters, GB/T 2348-2018. Standardization Administration, Beijing, China(in Chinese).

[14]TranXB, HafizahN, YanadaH, 2012. Modeling of dynamic friction behaviors of hydraulic cylinders. Mechatronics, 22(1):65-75.

[15]UznyS, KutrowskiŁ, 2019. Strength analysis of a telescopic hydraulic cylinder elastically mounted on both ends. Journal of Applied Mathematics and Computational Mechanics, 18(1):89-96.

[16]WangXW, YangZJ, FengJL, et al., 2013. Stress analysis and stability analysis on doubly-telescopic prop of hydraulic support. Engineering Failure Analysis, 32: 274-282.

[17]WuQP, MaC, LiL, et al., 2021. Load simulation analysis of a new erection system based on the gas-assisted drive erecting scheme. Journal of Physics: Conference Series, 1750:012039.

[18]XieZ, XieJ, DuWZ, et al., 2014. Time-varying integral adaptive sliding mode control for the large erecting system. Mathematical Problems in Engineering, 2014:950768.

[19]YanadaH, SekikawaY, 2008. Modeling of dynamic behaviors of friction. Mechatronics, 18(7):330-339.

[20]YangJ, HuangSZ, ZengL, 2019. Robust switched control strategy of large erecting equipment hydraulic systems. China Mechanical Engineering, 30(22):‍2698-2703 (in Chinese).

[21]YlinenA, MarjamäkiH, MäkinenJ, 2014. A hydraulic cylinder model for multibody simulations. Computers & Structures, 138:62-72.

[22]ZhouH, HouJY, ZhaoYG, et al., 2012. Model-based trajectory tracking control for an electrohydraulic lifting system with valve compensation strategy. Journal of Central South University, 19(11):3110-3117.