Similar articles

Abstract: A two-step gate-recess process combining high selective wet-etching and non-selective digital wet-etching techniques has been proposed for InAlAs/InGaAs InP-based high electron mobility transistors (HEMTs). High etching-selectivity ratio of InGaAs to InAlAs material larger than 100 is achieved by using mixture solution of succinic acid and hydrogen peroxide (H₂O₂). selective wet-etching is validated in the gate-recess process of InAlAs/InGaAs InP-based HEMTs, which proceeds and automatically stops at the InAlAs barrier layer. The non-selective digital wet-etching process is developed using a separately controlled oxidation/de-oxidation technique, and during each digital etching cycle 1.2 nm InAlAs material is removed. The two-step gate-recess etching technique has been successfully incorporated into device fabrication. digital wet-etching is repeated for two cycles with about 3 nm InAlAs barrier layer being etched off. InP-based HEMTs have demonstrated superior extrinsic transconductance and RF characteristics to devices fabricated during only the selective gate-recess etching process because of the smaller gate to channel distance.

结合选择性和数字湿法腐蚀的InAlAs/InGaAs InP基HEMTs两步栅槽腐蚀工艺

[1]Cao, X., Thoms, S., Macintyre, D., et al., 2004. Fabrication and performance of 50 nm T-gates for InP high electron mobility transistors. Microelectron. Eng., 73-74:818-821.

[2]Deal, W.R., Mei, X.B., Leong, K., et al., 2011a. THz monolithic integrated circuits using InP high electron mobility transistors. IEEE Trans. Terah. Sci. Technol., 1(1):25-32.

[3]Deal, W.R., Leong, K., Radisic, V., et al., 2011b. Low noise amplification at 0.67 THz using 30 nm InP HEMTs. IEEE Microw. Wirel. Compon. Lett., 21(7):368-370.

[4]Deal, W.R., Leong, K., Zamora, A., et al., 2014. Recent progress in scaling InP HEMT TMIC technology to 850 GHz. IEEE MTT-S Int. Microwave Symp., p.1-3.

[5]Leong, K., Mei, X.B., Yoshida, W., et al., 2015. A 0.85 THz low noise amplifier using InP HEMT transistors. IEEE Microw. Wirel. Compon. Lett., 25(6):397-399.

[6]Mei, X.B., Yoshida, W., Lange, M., et al., 2015. First demonstration of amplification at 1 THz using 25-nm InP high electron mobility transistor process. IEEE Electr. Dev. Lett., 36(4):327-329.

[7]Reck, T., Zemora, A., Schlecht, E., et al., 2016. A 230 GHz MMIC-based sideband separating receiver. IEEE Trans. Terah. Sci. Technol., 6(1):141-147.

[8]Rodwell, M.J.W., 2014. 50-500 GHz wireless: transistors, ICs, and system design. German Microwave Conf., p.1-4.

[9]Varonen, M., Reeves, R., Kangaslahti, P., et al., 2016. An MMIC low-noise amplifier design technique. IEEE Trans. Microw. Theory Techn., 64(3):826-835.

[10]Zhong, Y.H., Wang, X.T., Su, Y.B., et al., 2012a. Impact of the lateral width of the gate recess on the DC and RF characteristics of InAlAs/InGaAs HEMTs. J. Semicond., 33(5):61-65.

[11]Zhong, Y.H., Wang, X.T., Su, Y.B., et al., 2012b. An 88 nm gate-length In_0.53Ga_0.47As/In_0.52A_l0.48As InP-based HEMT with f_max of 201 GHz. J. Semicond., 33(7):39-42.

[12]Zhong, Y.H., Li, K.K., Li, X.J., et al., 2015. A W-band high-gain and low-noise amplifier MMIC using InP-based HEMTs. J Infrar. Millim. Waves, 34(6):668-672 (in Chinese).