Similar articles

Abstract: coaxial liquid-liquid flows were numerically studied in a nesting two-tube system. Calculations were carried out when various exit-lengths (meaning length differences between the two tubes) were used. Numerical results indicated that there exists a certain range of exit-length for the liquid-liquid flows to form stable and smooth interfaces, which requires that the exit-length should roughly be less than 5.6 times the outer tube diameter. In this range, interface instability is effectively restrained and the core fluid shows a phenomenon of die swell. When the exit-length is about 1.6 times the outer tube diameter, the core fluid has the greatest diameter size in the shell fluid. Velocity distributions at the outer tube exit favor formation of a continuous and stable core-shell structure.

[1] Arney, M.S., Ribeiro, G.S., Guevara, E., Bai, R., Joseph, D.D., 1996. Cement-lined pipes for water lubricated transport of heavy oil. International Journal of Liquid-liquid Flow, 22(2):207-221.

[2] Bai, R., Chen, K., Joseph, D.D., 1992. Lubricated pipelining: stability of core-annular flow. Part 5. Experiments and comparison with theory. Journal of Fluid Mechanics, 240:97-132.

[3] Drzain, P.G., Reid, W.H., 1981. Hydrodynamic Stability. Cambridge University Press.

[4] Feng, J., Huang, P.Y., Joseph, D.D., 1995. Dynamic simulation of the motion of capsules. Journal of Fluid Mechanics, 286:201-227.

[5] FLUENT6.0, 2003. User Guide Documentation, Computational Fluid Dynamics Software. New Hampshire, Lebanon.

[6] Hertz, C.H., Hermanrud, B., 1983. A liquid compound jet. Journal of Fluid Mechanics, 131:271-187.

[7] Huang, Z., Zhang, Y., Kotaki, M., Ramakrishna, S., 2003. A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Composites Science and Technology, 63(15):2223-2253.

[8] Joseph, D.D., 1990. Fluid Dynamics of Viscoelastic Liquids. Springer-Verlag New York Inc.

[9] Joseph, D.D., 1997. Lubricated pipelining. Powder Technology, 94(3):211-215.

[10] Loscertales, I.G., Barrero, A., Marquez, M., Spretz, R., Velarde-Ortiz, R., Larsen, G., 2004. Electrically forced coaxial nanojets for one-step hollow nanofiber design. J. AM. CHEM. SOC., 126(17):5376-5377.

[11] Reneker, D.H., Yarin, A.L., Fong, H., Koombhongse, S., 2000. Bending instability of electrically charged liquid jets of polymer solutions in electrospinning. Journal of Applied Physics, 87(9):4531-4547.

[12] Reznik, S.N., Yarin, A.L., Theron, A., Zussman, E., 2004. Transient and steady shapes of droplets attached to a surface in a strong electric field. J. Fluid Mech., 516:349-377.

[13] Rutledge, G.C., Shin, M.Y., Warner, S.B., Buer, B., Grimler, M., Ugbolue, S.C., 2001. A Fundamental Investigation of the Formation and Properties of Electrospun Fibers. National Textile Center Annual Report, M98-D01.

[14] Scardovelli, R., Zaleski, S., 1999. Direct numerical simulation of free-surface and interfacial flow. Annual Review of Fluid Mechanics, 31(1):567-603.

[15] Sun, Z., Zussman, E., Yarin, A.L., Wendorff, J.H., Greiner, A., 2003. Compound core-shell polymer nanofibers by co-electrospinning. Advanced Materials, 15(22):1929-1932.

[16] Theron, S.A., Zussman, E., Yarin, A.L., 2004. Experimental investigation of the governing parameters in the electrospinning of polymer solutions. Polymer, 45(6):2017-2030.

[17] Yarin, A.L., 2003. Lecture Notes 5: Electrospinning of Nanofibers from Polymer Solutions and Melts. Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland.

[18] Yarin, A.L., Koombhongse, S., Reneker, D.H., 2001. Bending instability in electrospinning of nanofibers. Journal of Applied Physics, 89(5):3018-3026.