CLC number: TM5
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 0000-00-00
Cited: 0
Clicked: 5739
LIU Jiao-min, WANG Jing-hong. New method for capturing arc of moving on switching apparatus[J]. Journal of Zhejiang University Science A, 2007, 8(3): 469-474.
@article{title="New method for capturing arc of moving on switching apparatus",
author="LIU Jiao-min, WANG Jing-hong",
journal="Journal of Zhejiang University Science A",
volume="8",
number="3",
pages="469-474",
year="2007",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2007.A0469"
}
%0 Journal Article
%T New method for capturing arc of moving on switching apparatus
%A LIU Jiao-min
%A WANG Jing-hong
%J Journal of Zhejiang University SCIENCE A
%V 8
%N 3
%P 469-474
%@ 1673-565X
%D 2007
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2007.A0469
TY - JOUR
T1 - New method for capturing arc of moving on switching apparatus
A1 - LIU Jiao-min
A1 - WANG Jing-hong
J0 - Journal of Zhejiang University Science A
VL - 8
IS - 3
SP - 469
EP - 474
%@ 1673-565X
Y1 - 2007
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2007.A0469
Abstract: The switching arc that occurs in contact gap when contact of low voltage apparatus closes or breaks in electric circuit is harmful to the contacts, insulation, and reliability of electrical gear because of its very high temperature. As arcing time is very short in switching gear, it is very difficult to observe arc phenomena directly for researchers. Therefore, visualization of switching arc is important for understanding arc phenomena, to analyze the arc features, and to improve the design and reliability of switching gear. Based on analyzing the visualization methods proposed by researchers, a new switching arc capturing approach is introduced in this paper. Arc image acquisition, and image processing techniques were studied. A switching arc image acquisition and visual simulation software based on high speed CCD camera hard ware system was designed and implemented to yield enhanced arc image with good visual effect.
[1] Karetta, F., Lindmayer, M., 1998. Simulation of the gasdynamic and electromagnetic processes in low voltage switching arcs. IEEE Trans. on Components, Packaging, and Manufacturing Technology, Part A, 21(1):96-102.
[2] Li, Z.P., Chen, D.G., Li, X.W., 2003. Optical fiber measurement system for arc motion with graphic configuration. Journal of Xi’an Jiaotong University, 37(10):1039-1043 (in Chinese).
[3] Liu, J.M., 1998. Study on Sampling and Processing of Arc Dynamic Image for Low Voltage Apparatus. Proceedings of Hebei University of Technology, Tianjin, p.50-150 (in Chinese).
[4] Rachard, H., Chevrier, P., Henry, D., 1999. Numerical study of coupled electromagnetic and aerothermodynamic phenomena in a circuit breaker electric arc. International Journal of Heat and Mass Transfer, 42(9):1723-1734.
[5] Swierczynski, B., Gonzalez, J.J., Teulet, P., 2004. Advances in low-voltage circuit breaker modeling. J. Phys. D: Appl. Phys., 37(4):595-609.
[6] Wang, J.H., Wang, X.Z., 2004. An Initial Analysis of Parametric Sensitivity to Fuzzy Extension Matrix. International Conference on Machine Learning and Cybernetics, p.1884-1888.
[7] Wang, J.H., Liu, J.M., 2006. Selection of Parameters Based on Fuzzy Extension Matrix. International Conference on Machine Learning and Cybernetics, p.1739-1744.
[8] Zhang, J., Chen, D.G., Fu, J., 1999. Mathematical model of magnetic field driven arc in arc chamber of low voltage circuit breaker. Proceedings of the CSEE, 19(10):22-26 (in Chinese).
Open peer comments: Debate/Discuss/Question/Opinion
<1>