Similar articles

Abstract: In order to improve parts accuracy, a method of adding heat balance support (HBS) was proposed, and the detailed algorithm for generating HBS was developed. A number of experiments and a comparison between similar softwares, showed that the algorithm is efficient and feasible. Moreover, different features of HBS were studied for different kinds of materials, such as PS and nylon. The research findings indicate that automatically adding HBS can significantly improve the accuracy of the parts, and that the algorithm for generating HBS is efficient and precise.

[1] Ang, B.Y., Chua, C.K., Du, Z.H., 2000. Study of trapped material in rapid prototyping parts. International Journal of Advanced Manufacturing Technology, 16(2):120-130.

[2] Armillotta, A.B.G., 2001. Control of Prototyping Surface Finish through Graphical Simulation. Proceedings of the VII ADM International Conferences, Rimini, Italy, p.17-24.

[3] Chua, C.K., Chou, S.M., Wong, T.S., 1998. A study of the state-of-the-art rapid prototyping technologies. International Journal of Advanced Manufacturing Technology, 14(2):146-152.

[4] Chua, C.K., Gan, J., Du, Z., Mei, T., 2002. Data Structure in Rapid Prototyping and Manufacturing. Database and Data Communication Network Systems, p.367-416.

[5] Dai, K., Shaw, L., 2004. Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders. Acta Materialia, 52(1):69-80.

[6] Du, Z.Q., Zhou, Z.D., Ai, W., Chen, Y.P., 2007. A linear drive system for the dynamic focus module of SLS machines. The International Journal of Advanced Manufacturing Technology, 32(11-12):1211-1217.

[7] Exner, H.H.M., Streek, A., Ullmann, F., Hartwig, L., Regenfu, P., Ebert, R., 2008. Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder. Virtual and Physical Prototyping, 3(1):3-11.

[8] Guo, K.B., Zhang, L.C., Wang, C.J., Huang, S.H., 2007. Boolean operations of STL models based on loop detection. International Journal of Advanced Manufacturing Technology, 33(5-6):627-633.

[9] Hardro, P.J., Wang, J., Stucker, B.E, 1998. A Design of Experiment Approach to Determine the Optimal Process Parameters for Rapid Prototyping Machines. Proceedings of the Joint Conference of the Fifth International Conference on Automation Technology and the 1998 International Conference of Production Research, Taipei.

[10] Kim, J., Creasy, T.S., 2004. Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite. Polymer Testing, 23(6):629-636.

[11] Kochan, D., Chua, C.K., Du, Z.H., 1999. Rapid prototyping issues in the 21st century. Computers in Industry, 39(1):3-10.

[12] Kolossov, S., Boillat, E., Glardon, R., Fischer, P., Locher, M., 2004. 3D FE simulation for temperature evolution in the selective laser sintering process. International Journal of Machine Tools & Manufacture, 44(2-3):117-123.

[13] Maeda, K., Childs, T.H.C., 2004. Laser sintering (SLS) of hard metal powders for abrasion resistant coatings. Journal of Materials Processing Technology, 149(1-3):609-615.

[14] Majewski, C.E., Hobbs, B.S., Hopkinson, N., 2007. Effect of bed temperature and infra-red lamp power on the mechanical properties of parts produced using high-speed sintering. Virtual and Physical Prototyping, 2(2):103-110.

[15] Ming, L.W., Gibson, I., 2006. Experimental investigation of ink on powder used for selective laser sintering. Journal of Materials Processing Technology, 174(1-3):91-101.

[16] Qi, B., Himmer, A.P., Gordon, L.M., Yang, X.D.V., Dickensheets, L.D., Vitkin, I.A., 2004. Dynamic focus control in high-speed optical coherence tomography based on a microelectromechanical mirror. Optics Communications, 232(1-6):123-128.

[17] Stevinson, B., Bourell, D.L., Beaman, Jr.J.J., 2006. Dimensional stability during post-processing of selective laser sintered ceramic performs. Virtual and Physical Prototyping, 1(4):209-216.

[18] Wang, R.J., Wang, L.L., Zhao, L.H., Liu, Z.J., 2007. Influence of process parameters on part shrinkage in SLS. International Journal of Advanced Manufacturing Technology, 33(5-6):498-504.

[19] Williams, J.D.D.C., 1998. Advances in modeling the effects of selected parameters on the SLS process. Rapid Prototyping Journal, 4(2):90-96.

[20] Yang, H.J., Hwang, P.J., Lee, S.H., 2002. A study on shrinkage compensation of SLS process by using the Taguchi method. International Journal of Machine Tools and Manufacture, 42(11):1203-1212.

[21] Zarringhalam, H., Hopkinson, N., Kamperman, N.F., de Vlieger, J.J., 2006. Effects of processing on microstructure and properties of SLS nylon 12. Materials Science and Engineering, 435-436(A):172-180.