CLC number: U260.331
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 2014-11-07
Cited: 5
Clicked: 8415
Citations: Bibtex RefMan EndNote GB/T7714
Shuo-qiao Zhong, Jia-yang Xiong, Xin-biao Xiao, Ze-feng Wen, Xue-song Jin. Effect of the first two wheelset bending modes on wheel-rail contact behavior[J]. Journal of Zhejiang University Science A, 2014, 15(12): 984-1001.
@article{title="Effect of the first two wheelset bending modes on wheel-rail contact behavior",
author="Shuo-qiao Zhong, Jia-yang Xiong, Xin-biao Xiao, Ze-feng Wen, Xue-song Jin",
journal="Journal of Zhejiang University Science A",
volume="15",
number="12",
pages="984-1001",
year="2014",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1400199"
}
%0 Journal Article
%T Effect of the first two wheelset bending modes on wheel-rail contact behavior
%A Shuo-qiao Zhong
%A Jia-yang Xiong
%A Xin-biao Xiao
%A Ze-feng Wen
%A Xue-song Jin
%J Journal of Zhejiang University SCIENCE A
%V 15
%N 12
%P 984-1001
%@ 1673-565X
%D 2014
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1400199
TY - JOUR
T1 - Effect of the first two wheelset bending modes on wheel-rail contact behavior
A1 - Shuo-qiao Zhong
A1 - Jia-yang Xiong
A1 - Xin-biao Xiao
A1 - Ze-feng Wen
A1 - Xue-song Jin
J0 - Journal of Zhejiang University Science A
VL - 15
IS - 12
SP - 984
EP - 1001
%@ 1673-565X
Y1 - 2014
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1400199
Abstract: The objective of this paper is to develop a new wheel-rail contact model, which is suitable for considering the effect of wheelset bending deformation on wheel-rail contact behavior at high speeds. Dummies of the two half rigid wheelset are introduced to describe the spacial positions of the wheels of the deformed wheelset. In modeling the flexible wheelset, the first two wheelset bending modes are considered. Based on the modal synthesis method, these mode values of the wheelset axle are used to solve the motion equations of the flexible wheelset axle modeled as an Euler-Bernoulli beam. The wheel is assumed to be rigid and always perpendicular to the deformed axle at the wheel centre. In the vehicle model, two bogies and one car body are modeled as lumped masses. Spring-damper elements are adopted to model the primary and secondary suspension systems. The ballasted track is modeled as a triple layer discrete elastic supported model. Two high-speed vehicle-track models, one considering rigid wheelset models and the other considering flexible wheelset models, are used to analyze the differences of the numerical results of the two models in both frequency and time domains. In the simulation, a random high-speed railway track irregularity is used as wheel-rail excitations. Wheel-rail forces are calculated and analyzed in the time and frequency domains. The results clarify that this new contact model can characterize very well the influence of the first two bending modes of the wheelset on contact behavior.
Open peer comments: Debate/Discuss/Question/Opinion
<1>
Ramesh<rcdohare@gmail.com>
2016-12-28 17:32:30
No where forces values are given ,Like if a 31Tonne axle load running at 300km/hr then at what force track will experiencing in longitudinal direction,vertical direction, thrust which over turn track?