Similar articles

Abstract: This paper presents the experimental results of small-scale model tests of an instrumented floating energy pile group in which the piles were embedded in dry medium-dense sand and subjected to the seasonal temperature pattern of the city of Nanjing in China. The study also included a model test to assess the effect of including nonthermal piles on the thermo-mechanical behaviour of the floating energy pile group. For comparison, a model test of a single floating energy pile embedded in the same soil and subjected to a similar temperature pattern was also conducted. The results show that the thermo-mechanical behaviour of an energy pile group is different from that of a single energy pile in terms of the thermally induced change in axial pile stress and the displacement of the pile top and tip. This difference in behaviour could be explained by the higher lateral confining pressure expected on a single pile than on a pile in a group due to pile interaction effects, which could lead to different end restraint boundary conditions. We conclude that the thermo-mechanical behaviour of an energy pile is controlled mainly by the end restraint boundary conditions.

This is a very interesting paper and is generally well-written. I think that the paper provides a nice set of experimental data on energy pile groups in sand.

砂土地基中摩擦型能量桩群桩热力学特性研究

[1]Amatya BL, Soga K, Bourne-Webb PJ, et al., 2012. Thermo-mechanical behaviour of energy piles. Géotechnique, 62(6):503-519.

[2]Bourne-Webb PJ, Amatya B, Soga K, et al., 2009. Energy pile test at Lambeth College, London: geotechnical and thermodynamic aspects of pile response to heat cycles. Géotechnique, 59(3):237-248.

[3]Bourne-Webb PJ, Amatya B, Soga K, 2012. A framework for understanding energy pile behaviour. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 166(2):170-177.

[4]Dave TN, Dasaka SM, 2012. Assessment of portable traveling pluviator to prepare reconstituted sand specimens. Geomechanics and Engineering, 4(2):79-90.

[5]Di Donna A, Laloui L, 2015. Numerical analysis of the geotechnical behaviour of energy piles. International Journal for Numerical and Analytical Methods in Geomechanics, 39(8):861-888.

[6]Goode III JC, McCartney JS, 2015. Centrifuge modeling of end-restraint effects in energy foundations. Journal of Geotechnology and Geoenvironmental Engineering, 141(8):1-13.

[7]Hariprasad C, Rajashekhar M, Umashankar B, 2016. Preparation of uniform sand specimens using stationary pluviation and vibratory methods. Geotechnical and Geological Engineering, 34(6):1909-1922.

[8]Jeong S, Lim H, Lee JK, et al., 2014. Thermally induced mechanical response of energy piles in axially loaded pile groups. Applied Thermal Engineering, 71(1):608-615.

[9]Kalantidou A, Tang AM, Pereira JM, et al., 2012. Preliminary study on the mechanical behaviour of heat exchanger pile in physical model. Géotechnique, 62(11):1047-1051.

[10]Kraft Jr LM, 1991. Performance of axially loaded pipe piles in sand. Journal of Geotechnical Engineering, 117(2):272-296.

[11]Laloui L, Nuth M, Vulliet L, 2006. Experimental and numerical investigations of the behaviour of a heat exchanger pile. International Journal for Numerical and Analytical Methods in Geomechanics, 30(8):763-781.

[12]Li M, Lai ACK, 2015. Review of analytical models for heat transfer by vertical ground heat exchangers (GHEs): a perspective of time and space scales. Applied Energy, 151: 178-191.

[13]Liu XC, Xu WJ, Zhan LT, et al., 2016. Laboratory and numerical study on an enhanced evaporation process in a loess soil column subjected to heating. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 17(7):553-564.

[14]Lo Presti DCF, Berardi R, Pedroni S, et al., 1993. A new traveling sand pluviator to reconstitute specimens of well-graded silty sands. Geotechnical Testing Journal, 16(1):18-26.

[15]McCartney JS, Rosenberg JE, 2011. Impact of heat exchange on side shear in thermo-active foundations. Geo-Frontiers 2011: Advances in Geotechnical Engineering, p.488-498.

[16]Mimouni T, Laloui L, 2015. Behaviour of a group of energy piles. Canadian Geotechnical Journal, 52(12):1913-1929.

[17]Murphy KD, McCartney JS, Henry KS, 2015. Evaluation of thermo-mechanical and thermal behavior of full-scale energy foundations. Acta Geotechnica, 10(2):179-195.

[18]Ng CWW, Shi C, Gunawan A, et al., 2014. Centrifuge modelling of energy piles subjected to heating and cooling cycles in clay. Géotechnique Letters, 4(4):310-316.

[19]Poulos HG, Mattes NS, 1985. Settlement and load distribution analysis of pile groups. In: Golden Jubilee of the International Society for Soil Mechanics and Foundation Engineering: Commemorative Volume. Institution of Engineers, Barton, Australia, p.155-165.

[20]Rotta Loria AF, Laloui L, 2017a. Thermally induced group effects among energy piles. Géotechnique, 67(5):374-393.

[21]Rotta Loria AF, Laloui L, 2017b. The equivalent pier method for energy pile groups. Géotechnique, 67(8):691-702.

[22]Rotta Loria AF, Laloui L, 2017c. Displacement interaction among energy piles bearing on stiff soil strata. Computers and Geotechnics, 90:144-154.

[23]Saggu R, Chakraborty T, 2016. Thermomechanical response of geothermal energy pile groups in sand. International Journal of Geomechanics, 16(4):1-13.

[24]Salciarini D, Ronchi F, Cattoni E, et al., 2013. Thermomechanical effects induced by energy piles operation in a small piled raft. International Journal of Geomechanics, 15(2):04014042.

[25]Salciarini D, Ronchi F, Tamagnini C, 2017. Thermo-hydro-mechanical response of a large piled raft equipped with energy piles: a parametric study. Acta Geotechnica, 12(4):703-728.

[26]Salgado R, Mitchell JK, Jamiolkowski M, 1998. Calibration chamber size effects on penetration resistance in sand. Journal of Geotechnical and Geoenvironmental Engineering, 124(9):878-888.

[27]Stewart MA, McCartney JS, 2014. Centrifuge modeling of soil-structure interaction in energy foundations. Journal of Geotechnical and Geoenvironmental Engineering, 140(4):04013044.

[28]Wang B, Bouazza A, Singh RM, et al., 2014. Posttemperature effects on shaft capacity of a full-scale geothermal energy pile. Journal of Geotechnical and Geoenvironmental Engineering, 141(4):04014125.

[29]Wang CL, Liu HL, Kong GQ, et al., 2016. Model tests of energy piles with and without a vertical load. Environmental Geotechnics, 3(4):203-213.

[30]Wang CL, Liu HL, Kong GQ, et al., 2017. Different types of energy piles with heating-cooling cycles. Proceedings of the Institution of Civil Engineers–Geotechnical Engineering, 170(3):220-231.

[31]Wang TF, Liu JK, Zhao HG, et al., 2016. Experimental study on the anti-jacking-up performance of a screw pile for photovoltaic stents in a seasonal frozen region. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 17(7):512-524.

[32]You S, Cheng XH, Guo HX, et al., 2014. In-situ experimental study of heat exchange capacity of CFG pile geothermal exchangers. Energy and Buildings, 79:23-31.

[33]You S, Cheng XH, Guo HX, et al., 2016. Experimental study on structural response of CFG energy piles. Applied Thermal Engineering, 96:640-651.