Full Text:   <3706>

CLC number: TP202

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 0000-00-00

Cited: 4

Clicked: 5924

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
1. Reference List
Open peer comments

Journal of Zhejiang University SCIENCE A 2006 Vol.7 No.9 P.1467-1473

http://doi.org/10.1631/jzus.2006.A1467


A Web-based machining process monitoring system for E-manufacturing implementation


Author(s):  SHIN Bong-cheol, KIM Gun-hee, CHOI Jin-hwa, JEON Byung-cheol, LEE Honghee, CHO Myeong-woo, HAN Jin-yong, PARK Dong-sam

Affiliation(s):  Division of Mechanical Engineering, Inha University, Incheon 402-751, Korea; more

Corresponding email(s):   chomwnet@inha.ac.kr

Key Words:  E-manufacturing, Web-based system, Internet, Machining process monitoring, Expert system


SHIN Bong-cheol, KIM Gun-hee, CHOI Jin-hwa, JEON Byung-cheol, LEE Honghee, CHO Myeong-woo, HAN Jin-yong, PARK Dong-sam. A Web-based machining process monitoring system for E-manufacturing implementation[J]. Journal of Zhejiang University Science A, 2006, 7(9): 1467-1473.

@article{title="A Web-based machining process monitoring system for E-manufacturing implementation",
author="SHIN Bong-cheol, KIM Gun-hee, CHOI Jin-hwa, JEON Byung-cheol, LEE Honghee, CHO Myeong-woo, HAN Jin-yong, PARK Dong-sam",
journal="Journal of Zhejiang University Science A",
volume="7",
number="9",
pages="1467-1473",
year="2006",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2006.A1467"
}

%0 Journal Article
%T A Web-based machining process monitoring system for E-manufacturing implementation
%A SHIN Bong-cheol
%A KIM Gun-hee
%A CHOI Jin-hwa
%A JEON Byung-cheol
%A LEE Honghee
%A CHO Myeong-woo
%A HAN Jin-yong
%A PARK Dong-sam
%J Journal of Zhejiang University SCIENCE A
%V 7
%N 9
%P 1467-1473
%@ 1673-565X
%D 2006
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2006.A1467

TY - JOUR
T1 - A Web-based machining process monitoring system for E-manufacturing implementation
A1 - SHIN Bong-cheol
A1 - KIM Gun-hee
A1 - CHOI Jin-hwa
A1 - JEON Byung-cheol
A1 - LEE Honghee
A1 - CHO Myeong-woo
A1 - HAN Jin-yong
A1 - PARK Dong-sam
J0 - Journal of Zhejiang University Science A
VL - 7
IS - 9
SP - 1467
EP - 1473
%@ 1673-565X
Y1 - 2006
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2006.A1467


Abstract: 
Recently, with the rapid growth of information technology, many studies have been performed to implement Web-based manufacturing system. Such technologies are expected to meet the need of many manufacturing industries who want to adopt e-manufacturing system for the construction of globalization, agility, and digitalization to cope with the rapid changing market requirements. In this research, a real-time Web-based machine tool and machining process monitoring system is developed as the first step for implementing e-manufacturing system. In this system, the current variations of the main spindle and feeding motors are measured using hall sensors. And the relationship between the cutting force and the spindle motor RMS (Root Mean Square) current at various spindle rotational speeds is obtained. Thermocouples are used to measure temperature variations of important heat sources of a machine tool. Also, a rule-based expert system is applied in order to decide the machining process and machine tool are in normal conditions. Finally, the effectiveness of the developed system is verified through a series of experiments.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1] Cheung, C.F., Lee, W.B., 2001. A framework of virtual machining and inspection system for diamond turning of precise optics. Journal of Materials Processing Technology, 119(1-3):27-40.

[2] Jin, L., Oraifige, I.A., Lister, P.M., Frank, R.H., 2001. E-manufacturing in networked virtual environments. IEEE, 39:1845-1849.

[3] Jung, M.S., Kim, B.S., Park, H.S., 2001. Architecture of Web-based real-time monitoring systems. Journal of Control, Automation, and System Engineering, 7:632-639.

[4] Kim, G.D., Chu, C.N., 1999. Indirect cutting force measurement considering frictional behavior in a machining center using feed motor current. The International Journal of Advanced Manufacturing Technology, 15(7):478-484.

[5] Kim, G.D., Chu, C.N., 2001. In process tool fracture monitoring in face milling using spindle motor current and tool fracture index. The International Journal of Advanced Manufacturing Technology, 18(6):383-389.

[6] Kraiem, N., 2001. Virtual spaces and virtual manufacturing. IEEE, 6:90-93.

[7] Kwon, W.T., Lee, I.H., 2001. Development of torque monitoring system of induction spindle motor using graphic-programming. Journal of the Korea Society of Precision Engineering, 18:184-193.

[8] Lee, J., 2003. E-manufacturing-fundamental, tools, and transformation and inspection system for diamond turning of precise optics. Journal of Materials Processing Technology, 119:501-507.

[9] Muto, K., 2003. Advanced technology for manufacturing engineering development: XML technology on a system that enables user to view required information from the workshop through a Web brower. JSAE Review, 24:303-312.

[10] Ouyang, C., Lin, J.S., Guan, T.Y., 2001. Developing a computer shop floor control model for a CIM system using object modeling techniques. Computers in Industry, 41:218-238.

[11] Park, J.J., Settineri, L., 1994. Cutting torque estimation using spindle power measurement. Transaction of NAMRI of SME, 24:85-90.

[12] Seo, D.K., Kang, M.J., 1999. Development of an expert system for diagnosing machine tool failures. Journal of the Korea Society of Precision Engineering, 16:217-224.

[13] Stein, J.L., Shin, K.C., 1986. Current monitoring of field controlled DC spindle drives. ASME Journal of Dynamic Systems Measurement and Control, 108:289-295.

[14] Stein, J.L., Wang, C.H., 1990. Analysis of power monitoring on AC induction drive system. ASME Journal of Dynamic Systems Measurement and Control, 112:239-248.

[15] Yu, Q.C., Chen, B., Cheng, H.H., 2004. Web-based control system design and analysis. IEEE, Control System Magazine, 24(3):45-47.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE