Abstract: In absolute distance measurement and positioning applications, atmospheric refraction error is a critical factor limiting measurement accuracy. Temperature plays a dominant role in computing the atmospheric refractive index. However, accurately acquiring the temperature field along the ranging path in complex and dynamic outdoor environments remains challenging due to limited sensor deployment and environmental nonstationarity. This paper proposes a spatiotemporal temperature data fusion method for atmospheric refraction correction,which integrates the strengths of the generalized regression neural network (GRNN) and kriging interpolation within a Kalman filter. This method achieves dynamic prediction and high-accuracy reconstruction of temperature parameters. The proposed method is systematically validated through simulation analysis as well as indoor and kilometer-scale outdoor experimental measurements. The simulation results demonstrate that KFEF outperforms the traditional interpolation method RBF as well as the advanced spatiotemporal interpolation and prediction methods STK and GP in terms of both reconstruction accuracy and stability of the temperature field. Specifically, KFEF achieves a 61.54% reduction in RMSE compared with RBF and reductions of 34.21% and 32.43% relative to STK and GP, respectively. This indicates its strong practical value for long-distance high-precision ranging engineering applications. Furthermore, the proposed spatiotemporal data fusion framework is highly general and scalable. It can also be applied to other temperature field prediction and reconstruction problems.

FTHOE：一种面向晶圆级互连网络的哈密顿驱动容错路由算法

[1]Agarwal N, Krishna T, Peh LS, et al., 2009. GARNET: a detailed on-chip network model inside a full-system simulator. IEEE Int Symp on Performance Analysis of Systems and Software, p.33-42.

[2]Bahrebar P, Stroobandt D, 2015. The Hamiltonian-based odd–even turn model for maximally adaptive routing in 2D mesh networks-on-chip. Comput Electr Eng, 45:386-401.

[3]Bohr M, 2007. A 30 year retrospective on Dennard’s MOSFET scaling paper. IEEE Sol-State Circ Soc Newsl, 12(1):11-13.

[4]Charif A, Zergainoh NE, Nicolaidis M, 2016. Addressing transient routing errors in fault-tolerant networks-on-chips. 21^st IEEE European Test Symp, p.1-6.

[5]Dally WJ, Seitz CL, 1987. Deadlock-free message routing in multiprocessor interconnection networks. IEEE Trans Comput, C-36(5):547-553.

[6]Daneshtalab M, Ebrahimi M, Xu TC, et al., 2011. A generic adaptive path-based routing method for MPSoCs. J Syst Architect, 57(1):109-120.

[7]Ebrahimi M, Daneshtalab M, 2015. A light-weight fault-tolerant routing algorithm tolerating faulty links and routers. Computing, 97(6):631-648.

[8]Guan J, Cai JP, Wang YQ, et al., 2023. A low-cost oblivious and fault-tolerant routing strategy for NoCs. J Air Force Eng Univ, 24(1):95-102 (in Chinese).

[9]Hu Y, Lin XH, Wang HZ, et al., 2024. Wafer-scale computing: advancements, challenges, and future perspectives. IEEE Circ Syst Mag, 24(1):52-81.

[10]Jerger NE, Kannan A, Li ZM, et al., 2014. NoC architectures for silicon interposer systems: why pay for more wires when you can get them (from your interposer) for free? 47^th Annual IEEE/ACM Int Symp on Microarchitecture, p.458-470.

[11]Joshi B, Thakur MK, 2023. A traffic intensive virtual channels allocation scheme in network-on-chip. Arab J Sci Eng, 48(8):9619-9633.

[12]Lowe-Power J, Ahmad AM, Akram A, et al., 2020. The gem5 simulator: version 20.0+.

[13]Mohapatra H, Rath AK, 2019. Fault tolerance in WSN through PE-LEACH protocol. IET Wirel Sens Syst, 9(6):358-365.

[14]Moore GE, 1998. Cramming more components onto integrated circuits. Proc IEEE, 86(1):82-85.

[15]Nehnouh C, Senouci M, 2019. A new fault tolerant routing algorithm for networks on chip. Int J Embed Real-Time Commun Syst, 10(3):68-85.

[16]Pal S, Petrisko D, Tomei M, et al., 2019. Architecting waferscale processors—a GPU case study. IEEE Int Symp on High Performance Computer Architecture, p.250-263.

[17]Pal S, Liu JY, Alam I, et al., 2021. Designing a 2048-chiplet, 14336-core waferscale processor. 58^th ACM/IEEE Design Automation Conf, p.1183-1188.

[18]Rahaman MM, Ghosal P, Das TS, 2019. Latency, throughput and power aware adaptive NoC routing on orthogonal convex faulty region. J Circ Syst Comput, 28(4):1950055.

[19]Renani NB, Yaghoubi E, Sadehnezhad N, et al., 2022. NLR-OP: a high-performance optical router based on North-Last turning model for multicore processors. J Supercomput, 78(2):2442-2476.

[20]Reza A, Jolani P, Reshadi M, 2019. CAFT: cost-aware and fault-tolerant routing algorithm in 2D mesh network-on-chip. J Adv Comput Eng Technol, 5(4):205-212.

[21]Wu JX, Liu QR, Shen JL, et al., 2024. From SoC to SDSoW: a new paradigm for microelectronics development. Sci Sin Inform, 54(6):1350-1368 (in Chinese).

[22]Xie RL, Cai JP, Xin X, 2016. Simple fault-tolerant method to balance load in network-on-chip. Electron Lett, 52(10):814-816.

[23]Xie RL, Cai JP, Xin X, et al., 2018. LBFT: a fault-tolerant routing algorithm for load-balancing network-on-chip based on odd–even turn model. J Supercomput, 74(8):3726-3747.

[24]Xu Z, Kong DH, Liu JX, et al., 2025. WSC-LLM: efficient LLM service and architecture co-exploration for wafer-scale chips. Proc 52^nd Annual Int Symp on Computer Architecture, p.1-17.

[25]Yang QZ, Wei TQ, Guan SH, et al., 2025. PD constraint-aware physical/logical topology co-design for network on wafer. Proc 52^nd Annual Int Symp on Computer Architecture, p.49-64.

[26]Yu XM, Jiang DC, Deng JY, et al., 2025. Cramming a data center into one cabinet, a co-exploration of computing and hardware architecture of waferscale chip. Proc 52^nd Annual Int Symp on Computer Architecture, p.631-645.

[27]Zhang YJ, Fan WB, Han ZJ, et al., 2021. Fault-tolerant routing algorithm based on disjoint paths in 3-ary n-cube networks with structure faults. J Supercomput, 77(11):13090-13114.