Full Text:  <10061>

Summary:  <2508>

CLC number: TK172

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2013-05-16

Cited: 6

Clicked: 10658

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A

Accepted manuscript available online (unedited version)


Simulation, experimentation, and collaborative analysis of adjacent heat exchange modules in a vehicular cooling system


Author(s):  Yu-qi Huang1;2, Rui Huang1, Xiao-li Yu1, Feng Lv1

Affiliation(s):  1. Power Machinery and Vehicular Engineering Institute, Zhejiang University, Hangzhou 310027, China;2. Department of Mechanical and Aerospace Engineering, Monash University-Clayton, Victoria 3800, Australia

Corresponding email(s):  huangyuqi@zju.edu.cn

Key Words:  Collaborative analysis, Heat exchangers, Field synergy principle, Computational fluid dynamics (CFD), Wind tunnel


Share this article to: More <<< Previous Paper|Next Paper >>>

Yu-qi Huang, Rui Huang, Xiao-li Yu, Feng Lv. Simulation, experimentation, and collaborative analysis of adjacent heat exchange modules in a vehicular cooling system[J]. Journal of Zhejiang University Science A,in press.Frontiers of Information Technology & Electronic Engineering,in press.https://doi.org/10.1631/jzus.A1300038

@article{title="Simulation, experimentation, and collaborative analysis of adjacent heat exchange modules in a vehicular cooling system",
author="Yu-qi Huang, Rui Huang, Xiao-li Yu, Feng Lv",
journal="Journal of Zhejiang University Science A",
year="in press",
publisher="Zhejiang University Press & Springer",
doi="https://doi.org/10.1631/jzus.A1300038"
}

%0 Journal Article
%T Simulation, experimentation, and collaborative analysis of adjacent heat exchange modules in a vehicular cooling system
%A Yu-qi Huang
%A Rui Huang
%A Xiao-li Yu
%A Feng Lv
%J Journal of Zhejiang University SCIENCE A
%P 417-426
%@ 1673-565X
%D in press
%I Zhejiang University Press & Springer
doi="https://doi.org/10.1631/jzus.A1300038"

TY - JOUR
T1 - Simulation, experimentation, and collaborative analysis of adjacent heat exchange modules in a vehicular cooling system
A1 - Yu-qi Huang
A1 - Rui Huang
A1 - Xiao-li Yu
A1 - Feng Lv
J0 - Journal of Zhejiang University Science A
SP - 417
EP - 426
%@ 1673-565X
Y1 - in press
PB - Zhejiang University Press & Springer
ER -
doi="https://doi.org/10.1631/jzus.A1300038"


Abstract: 
A cooling system consisting of several heat exchange modules is a necessary part of an automobile, and its performance has a direct effect on a vehicle’s energy consumption. heat exchangers, such as a charged air cooler (CAC), radiator, oil cooler, or condenser have different structures and can be arranged in various orders, and each combination may produce different effects because of interactions among them. In this study, we aimed to explore the principles governing interactions among adjacent heat exchangers in a cooling system, using numerical simulation and experimental technology. 3D models with different combinations were developed, compared, and analyzed comprehensively. A wind tunnel test platform was constructed to validate the computational results. We found that the heat dissipation of the modules was affected slightly by their relative position (the rules basically comply with the field synergy principle), but was independent of the modules’ spacing within a certain distance range. The heat dissipation of one module could be effectively improved by restructuring, but with a penalty of higher resistance. However, the negative effect on the downstream module was much less than expected. The results indicated that the intensity of heat transfer depends not only on the average temperature difference between cold and hot mediums, but also on the temperature distribution.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

References

[1] Asanuma,T, Kojima,K, Muramoto,H, 1997, Analysis of Mutual Thermal Effects in Radiator and Condenser Cooling  SAE Technical Paper, 1997-1774, ():-.


[2] Dong,J.Q, 2007, Research on Air Side Flow and Heat Transfer Character of Vehicle Cooling Systems. PhD Thesis,Shanghai Jiao Tong University,Shanghai, China.

[3] Dong,J.Q, Chen,J.P, Chen,Z.J, Zhang,W.F, Zhou,Y.M, 2007, Heat transfer and pressure drop correlations for the multi-louvered fin compact heat exchangers  Energy Conversion and Management, 48(5):1506-1515.


[4] Dong,J.Q, Chen,J.P, Chen,Z.J, Zhou,Y.M, Zhang,W.F, 2007, Heat transfer and pressure drop correlations for the wavy fin and flat tube heat exchangers  Applied Thermal Engineering, 27(2-3):2066-2073.


[5] Guo,Z.Y, Huang,S.Y, 2004, Field Synergy Principle and New Technique of Heat Transfer Enhancement. (in Chinese),China Electric Power Press,Beijing, China.

[6] Huang,Y.Q, 2010, The Flow and Heat Transfer Coupling Analysis and Construction Modification of Vehicular Cooling Models based on Field Synergy Principle. PhD Thesis,Zhejiang University,Hangzhou, China.

[7] Juan,T, 2008, Investigation and Assessment of Factors Affecting the Under-hood Cooling Air Flow Using CFD  SAE Technical Paper, 2008-01-2658, ():-.


[8] Khaled,M, Mangi,F, El Hage,H, Harambat,F, Peerhossaini,H, 2012, Fan air flow analysis and heat transfer enhancement of vehicle under-hood cooling systemTowards a new control approach for fuel consumption reduction  Applied Energy, 91(1):439-450.


[9] Kim,H.J, Kim,C.J, 2008, A numerical analysis for the cooling module related to automobile air-conditioning system  Applied Thermal Engineering, 28(14-15):1896-1905.


[10] Launder,B, Spalding,D.B, 1972, Mathematical Models of Turbulence. Academic Press,London, England.

[11] Lv,F, 2010, The Investigation on Match and Design of Commercial Vehicle Cooling Module. PhD Thesis,Zhejiang University,Hangzhou, China.

[12] Ngy,S.A, 1999, A Simple Engine Cooling System Simulation Model  SAE Technical Paper, 1999-01-0237, ():-.


[13] Ngy,S.A, Guerrero,P, Jouanny,P, 2002, Influence of Front End Vehicle, Fan and Shroud on the Heat Performance of A/C Condenser and Cooling Radiator  SAE Technical Paper, 2002-01-1206, ():-.


[14] Uhl,B, Brotz,F, Fauser,J, 2001, Development of Engine Cooling Systems by Coupling CFD Simulation and Heat Exchanger Analysis Programs  SAE Technical Paper, 2001-01-1695, ():-.



Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2025 Journal of Zhejiang University-SCIENCE