JZUS - Journal of Zhejiang University SCIENCE

Journal of Zhejiang University SCIENCE A

Accepted manuscript available online (unedited version)

Progress in research on mixing techniques for transverse injection flow fields in supersonic crossflows

Author(s): Wei Huang, Li Yan
Affiliation(s): . Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha 410073, China
Corresponding email(s): gladrain2001@163.com
Key Words: Aerospace propulsion system, Transverse injection, Mixing, Supersonic crossflow

Share this article to： More <<< Previous Paper \|Next Paper >>>

Wei Huang, Li Yan. Progress in research on mixing techniques for transverse injection flow fields in supersonic crossflows[J]. Journal of Zhejiang University Science A,in press.Frontiers of Information Technology & Electronic Engineering,in press.https://doi.org/10.1631/jzus.A1300096

@article{title="Progress in research on mixing techniques for transverse injection flow fields in supersonic crossflows",
author="Wei Huang, Li Yan",
journal="Journal of Zhejiang University Science A",
year="in press",
publisher="Zhejiang University Press & Springer",
doi="https://doi.org/10.1631/jzus.A1300096"
}

%0 Journal Article
%T Progress in research on mixing techniques for transverse injection flow fields in supersonic crossflows
%A Wei Huang
%A Li Yan
%J Journal of Zhejiang University SCIENCE A
%P 554-564
%@ 1673-565X
%D in press
%I Zhejiang University Press & Springer
doi="https://doi.org/10.1631/jzus.A1300096"

TY - JOUR
T1 - Progress in research on mixing techniques for transverse injection flow fields in supersonic crossflows
A1 - Wei Huang
A1 - Li Yan
J0 - Journal of Zhejiang University Science A
SP - 554
EP - 564
%@ 1673-565X
Y1 - in press
PB - Zhejiang University Press & Springer
ER -
doi="https://doi.org/10.1631/jzus.A1300096"

Abstract
Chinese Summary
Academic Network
Reviewer Comment

Abstract: The transverse injection flow field has an important impact on the flowpath design of scramjet engines. At present a combination of the transverse injection scheme and any other flame holder has been widely employed in hypersonic propulsion systems to promote the mixing process between the fuel and the supersonic freestream; combustion efficiency has been improved thereby, as well as engine thrust. Research on mixing techniques for the transverse injection flow field is summarized from four aspects, namely the jet-to-crossflow pressure ratio, the geometric configuration of the injection port, the number of injection ports, and the injection angle. In conclusion, urgent investigations of mixing techniques of the transverse injection flow field are proposed, especially data mining in the quantitative analytical results for transverse injection flow field, based on results from multi-objective design optimization theory.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

References

[1] Abbitt,J.D, Segal,C, McDaniel,J.C, Krauss,R.H, Whitehurst,R.B, 1993, Experimental supersonic hydrogen combustion employing staged injection behind a rearward-facing step Journal of Propulsion and Power, 9(3):472-478.

[2] Abdelhafez,A, Gupta,A.K, Balar,R, 2007, Evaluation of Oblique and Traverse Fuel Injection in a Supersonic Combustor AIAA Paper 2007-5026, ():-.

[3] Ali,M, Sadrul Islam,A.K.M, 2006, Study on main flow and fuel injector configurations for scramjet applications International Journal of Heat and Mass Transfer, 49(19-20):3634-3644.

[4] Aso,S, Okuyama,S, Kawai,M, 1991, Experimental Study on Mixing Phenomena in Supersonic Flows with Slot Injection AIAA Paper 91-0016, ():-.

[5] Aso,S, Inoue,K, Yamaguchi,K, Tani,Y, 2009, A study on supersonic mixing by circular nozzle with various injection angles for air breathing engine Acta Astronautica, 65(5-6):687-695.

[6] Beresh,S.J, Henfling,J.F, Erven,R.J, Spillers,R.W, 2006, Crossplane velocimetry of a transverse supersonic jet in a transonic crossflow AIAA Journal, 44(12):3051-3061.

[7] Bowersox,R.D.W, Fan,H, Lee,D, 2004, Sonic injection into a Mach 5.0 freestream through diamond orifices Journal of Propulsion and Power, 20(2):280-287.

[8] Brieschenk,S, OByrne,S, Kleine,H, 2013, Laser-induced plasma ignition studies in a model scramjet engine Combustion and Flame, 160(1):145-148.

[9] Cecere,D, Ingenito,A, Giacomazzi,E, Romagnosi,L, Bruno,C, 2011, Hydrogen/air supersonic combustion for future hypersonic vehicles International Journal of Hydrogen Energy, 36(18):11969-11984.

[10] Chakraborty,D, Roychowdhury,A.P, Ashok,V, Kumar,P, 2003, Numerical investigation of staged transverse sonic injection in Mach 2 stream in confined environment The Aeronautical Journal, 107():719-729.

[11] Chen,L.W, Wang,G.L, Lu,X.Y, 2011, Numerical investigation of a jet from a blunt body opposing a supersonic flow Journal of Fluid Mechanics, 684():85-110.

[12] Feng,X.P, Lin,Z.Y, Zheng,Y, Li,J.X, Cao,Q, 2011, Adjusting principle of gas jet controlling inlet and numerical verification Science in China Series E: Technological Sciences, 54(11):2981-2986.

[13] Gao,Z.X, Lee,C.H, 2011, Numerical research on mixing characteristics of different injection schemes for supersonic transverse jet Science in China Series E: Technological Sciences, 54(4):883-893.

[14] Guoskov,O.V, Kopchenov,V.I, Lomkov,K.E, Vinogradov,V.A, Waltrup,P.J, 2001, Numerical research of gaseous fuel preinjection in hypersonic three-dimensional inlet Journal of Propulsion and Power, 17(6):1162-1169.

[15] Hassan,E, Boles,J, Aono,H, Davis,D, Shyy,W, 2013, Supersonic jet and crossflow interaction: Computational modeling Progress in Aerospace Sciences, 57():1-24.

[16] Huang,W, Qin,H, Luo,S.B, Wang,Z.G, 2010, Research status of key techniques for shock-induced combustion ramjet (scramjet) engine Science in China Series E: Technological Sciences, 53(1):220-226.

[17] Huang,W, Pourkashanian,M, Wang,Z.G, 2011, Overview of Fuel Injection Techniques for Scramjet Engines , Proceedings of ASME Turbo Expo, British Columbia, Canada, p. -.

[18] Huang,W, Wang,Z.G, Luo,S.B, Liu,J, 2011, Parametric effects on the combustion flow field of a typical strut-based scramjet combustor Chinese Science Bulletin, 56(35):3871-3877.

[19] Huang,W, Liu,W.D, Li,S.B, Xia,Z.X, Liu,J, Wang,Z.G, 2012, Influences of the turbulence model and the slot width on the transverse slot injection flow field in supersonic flows Acta Astronautica, 73():1-9.

[20] Huang,W, Ma,L, Pourkashanian,M, Ingham,D.B, Luo,S.B, Wang,Z.G, 2012, Parametric effects in a scramjet engine on the interaction between the air stream and the injection Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 226(3):294-309.

[21] Huang,W, Wang,Z.G, Wu,J.P, Li,S.B, 2013, Numerical prediction on the interaction between the incident shock wave and the transverse slot injection in supersonic flows Aerospace Science and Technology, 28(1):91-99.

[22] Huang,W, Wang,Z.G, Ingham,D.B, Ma,L, Pourkashanian,M, 2013, Design exploration for a single expansion ramp nozzle (SERN) using data mining Acta Astronautica, 83():10-17.

[23] Huang,W, Li,S.B, Yan,L, Wang,Z.G, 2013, Performance evaluation and parametric analysis on cantilevered ramp injector in supersonic flows Acta Astronautica, 84():141-152.

[24] Ilak,M, Schlatter,P, Bagheri,S, Chevalier,M, Henningson,D.S, 2011, Stability of a jet in crossflow Physics of Fluids, 23(9):091113-.

[25] Kobayashi,K, Bowersox,R.D.W, Srinivasan,R, Tichenor,N.R, Carter,C.D, Ryan,M.D, 2010, Experimental and numerical studies of diamond-shaped injector in a supersonic flow Journal of Propulsion and Power, 26(2):373-376.

[26] Kovar,A, Schulein,E, 2006, Comparison of experimental and numerical investigation on a jet in a supersonic cross-flow The Aeronautical Journal, 110():353-360.

[27] Lee,S.H, 2006, Characteristics of dual transverse injection in scramjet combustor, Part 1: Mixing Journal of Propulsion and Power, 22(5):1012-1019.

[28] Lee,S.H, 2006, Characteristics of dual transverse injection in scramjet combustor, Part 2: Combustion Journal of Propulsion and Power, 22(5):1020-1026.

[29] Li,Z.W, Huai,W.X, Qian,Z.D, 2012, Study on the flow field and concentration characteristics of the multiple tandem jets in crossflow Science in China Series E: Technological Sciences, 55(10):2778-2788.

[30] Livingston,T, Segal,C, Schindler,M, Vinogradov,V.A, 2000, Penetration and spreading of liquid jets in an external-internal compression inlet AIAA Journal, 38(6):989-994.

[31] Manna,P, Chakraborty,D, 2005, Numerical investigation of transverse sonic injection in a non-reaction supersonic combustor Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 219(2):205-215.

[32] Mura,A, Izard,J.F, 2010, Numerical simulation of supersonic nonpremixed turbulent combustion in a scramjet combustor model Journal of Propulsion and Power, 26(4):858-868.

[33] Ogawa,H, Boyce,R.R, 2012, Multi-objective Design Optimization of Fuel Injection for Mixing Enhancement in Scramjets by Using Surrogate-assisted Evolutionary Algorithms AIAA Paper 2012-5815, ():-.

[34] Peterson,D.M, Candler,G.V, 2010, Hybrid Reynolds-averaged and large-eddy simulation of normal injection into a supersonic crossflow Journal of Propulsion and Power, 26(3):533-544.

[35] Pudsey,A.S, Boyce,R.R, 2010, Numerical investigation of transverse jets through multiport injector arrays in supersonic crossflow Journal of Propulsion and Power, 26(6):1225-1236.

[36] Pudsey,A.S, Boyce,R.R, Wheatley,V, 2012, Hypersonic Viscous Drag Reduction via Multi-Porthole Injector Arrays AIAA Paper 2012-5934, 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, p. -.

[37] Qin,J, Bao,W, Zhang,S.L, Song,Y.F, Yu,D.R, 2012, Thermodynamic analysis for a chemically recuperated scramjet Science in China Series E: Technological Sciences, 55(11):3204-3212.

[38] Rizzetta,D, 1992, Numerical Simulation of Slot Injection into a Turbulent Supersonic Stream AIAA Paper 92-0827, 30th Aerospace Sciences Meeting & Exhibit, Reno, NV, p. -.

[39] Seiner,J.M, Dash,S.M, Kenzakowski,D.C, 2001, Historical survey on enhanced mixing in scramjet engines Journal of Propulsion and Power, 17(6):1273-1286.

[40] Srinivasan,R, Bowersox,R.D.W, 2008, Transverse injection through diamond and circular ports into a Mach 5.0 freestream AIAA Journal, 46(8):1944-1962.

[41] Takahashi,H, Ikegami,S, Masuya,G, Hirota,M, 2010, Extended quantitative fluorescence imaging for multicomponent and staged injection into supersonic crossflows Journal of Propulsion and Power, 26(4):798-807.

[42] Takahashi,H, Tu,Q, Segal,C, 2010, Effects of pylon-aided fuel injection on mixing in a supersonic flowfield Journal of Propulsion and Power, 26(5):1092-1101.

[43] Tomioka,S, Kohchi,T, Masumoto,R, Izumikawa,M, Matsuo,A, 2011, Supersonic combustion with supersonic injection through diamond-shaped orifices Journal of Propulsion and Power, 27(6):1196-1203.

[44] Turner,J.C, Smart,M.K, 2010, Application of inlet injection to a three-dimensional scramjet at Mach 8 AIAA Journal, 48(4):829-838.

[45] Wang,H.B, Qin,N, Sun,M.B, Wu,H.Y, Wang,Z.G, 2011, A hybrid LES (Large Eddy Simulation)/assumed sub-grid PDF (Probability Density Function) model for supersonic turbulent combustion Science in China Series E: Technological Sciences, 54(10):2694-2707.

[46] Wang,X.W, Cai,G.B, Gao,Y.S, Huo,H.F, 2011, High flowrate injector with gaseous hydrogen and gaseous oxygen Science in China Series E: Technological Sciences, 54(11):2958-2973.

[47] Wang,Y.W, Sislian,J.P, 2010, Numerical simulation of gaseous hydrocarbon fuel injection in a hypersonic inlet Journal of Propulsion and Power, 26(5):1114-1124.

[48] Xu,S.L, Archer,R.D, Milton,B.E, Yue,P.T, 2000, Unsteady transverse injection of kerosene into a supersonic flow Science in China Series E: Technological Sciences, 43(2):206-214.

[49] Yang,H, Li,F, Sun,B, 2012, Trajectory analysis of fuel injection into supersonic cross flow Chinese Journal of Aeronautics, 25(1):42-50.

[50] Yang,H.Q, Kim,T.B, Lu,T.J, 2011, Characteristics of annular impinging jets with/without swirling flow by short guide vanes Science in China Series E: Technological Sciences, 54(3):749-757.

[51] You,Y.C, Ludeke,H, Hannemann,K, 2012, On the flow physics of a low momentum flux ratio jet in a supersonic turbulent crossflow , (97):24001-.

[52] You,Y.C, Luedeke,H, Hannemann,K, 2013, Injection and Mixing in a Scramjet Combustor: DES and RANS Studies Proceedings of the Combustion Institute, 34(2):2083-2092.

[53] Zhang,H.Q, Rong,Y, Wang,B, Wang,X.L, 2011, Large eddy simulation of a 3-D spatially developing turbulent round jet Science in China Series E: Technological Sciences, 54(11):2916-2923.

[54] Zhang,H.Q, Ga,Y.J, Wang,B, Wang,X.L, 2012, Analysis of combustion instability via constant volume combustion in a LOX/RP-1 bipropellant liquid rocket engine Science in China Series E: Technological Sciences, 55(4):1066-1077.

[55] Zhang,P.F, Dai,C.F, Liu,A.B, Wang,J.J, 2011, The effect of actuation frequency on the plasma synthetic jet Science in China Series E: Technological Sciences, 54(11):2945-2950.

[56] Zou,J.F, Zheng,Y, Liu,O.Z, 2007, Simulation of turbulent combustion in DLR scramjet Journal of Zhejiang University-SCIENCE A, 8(7):1053-1058.

- Go to

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

References