Abstract: X-ray and γ‍-ray detectors are widely used in medical, military, security, material analysis, and industrial inspection. In recent years, perovskite materials have become promising materials for radiation detection owing to their strong stopping power, considerable carrier transportation ability, and simple synthesis process. Previous studies have demonstrated both direct and indirect radiation detectors using perovskite materials. In this review, we aim to elucidate the mechanism by which X-rays and γ-rays interact with matter, explain the principles of the energy integrating mode and photon counting mode for direct detection, and discuss the key factors determining device performance. Furthermore, we summarize recent advances in perovskite-based radiation detectors for both modes. Additionally, we identify challenges that need to be overcome to enable perovskite materials to be successfully commercialized.

用于能量积分和能谱分辨X射线探测的卤化物-钙钛矿半导体研究进展

[1]AlvarezRE, 2014. Signal to noise ratio of energy selective X-ray photon counting systems with pileup. Medical Physics, 41(11):111909.

[2]Als-NielsenJ, McMorrowD, 2011. Elements of Modern X-ray Physics. 2nd Edition. John Wiley & Sons, Inc., USA.

[3]BarberWC, WesselJC, NygardE, et al., 2013. High flux energy-resolved photon-counting X-ray imaging arrays with CdTe and CdZnTe for clinical CT. The 3rd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and Their Applications (ANIMMA).

[4]BrunettiB, CavalloC, CiccioliA, et al., 2016. On the thermal and thermodynamic (in)stability of methylammonium lead halide perovskites. Scientific Reports, 6(1):31896.

[5]DanielssonM, PerssonM, SjölinM, 2021. Photon-counting X-ray detectors for CT. Physics in Medicine & Biology, 66(3):03TR01.

[6]del SordoS, AbbeneL, CaroliE, et al., 2009. Progress in the development of CdTe and CdZnTe semiconductor radiation detectors for astrophysical and medical applications. Sensors, 9(5):3491-3526.

[7]DevanathanR, CorralesLR, GaoF, et al., 2006. Signal variance in gamma-ray detectors—a review. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 565(2):637-649.

[8]EvansRD, BeiserA, 1956. The atomic nucleus. Physics Today, 9(12):33-34.

[9]GuerraM, MansoM, LongelinS, et al., 2012. Performance of three different Si X-ray detectors for portable XRF spectrometers in cultural heritage applications. Journal of Instrumentation, 7(10):C10004.

[10]HeYH, MateiL, JungHJ, et al., 2018a. High spectral resolution of gamma-rays at room temperature by perovskite CsPbBr₃ single crystals. Nature Communications, 9(1):1609.

[11]HeYH, KeWJ, AlexanderGCB, et al., 2018b. Resolving the energy of γ‍-ray photons with MAPbI₃ single crystals. ACS Photonics, 5(10):4132-4138.

[12]HeYH, PetrykM, LiuZF, et al., 2021a. CsPbBr₃ perovskite detectors with 1.4% energy resolution for high-energy γ‍-rays. Nature Photonics, 15(1):36-42.

[13]HeYH, StoumposCC, HadarI, et al., 2021b. Demonstration of energy-resolved γ‍-ray detection at room temperature by the CsPbCl₃ perovskite semiconductor. Journal of the American Chemical Society, 143(4):2068-2077.

[14]HeYH, HadarI, de SienaMC, et al., 2022. Sensitivity and detection limit of spectroscopic-grade perovskite CsPbBr₃ crystal for hard X-ray detection. Advanced Functional Materials, 32(24):2112925.

[15]HendeeW, 2010. Radiation physics for medical physicists—2nd ed. Medical Physics, 37(9):5148.

[16]HuMX, JiaSS, LiuYC, et al., 2020. Large and dense organic–inorganic hybrid perovskite CH₃NH₃PBI₃ wafer fabricated by one-step reactive direct wafer production with high X-ray sensitivity. ACS Applied Materials & Interfaces, 12(14):16592-16600.

[17]HuangYM, QiaoL, JiangYZ, et al., 2019. A-site cation engineering for highly efficient MAPbI₃ single-crystal X-ray detector. Angewandte Chemie International Edition, 58(49):17834-17842.

[18]JinP, TangYD, LiDW, et al., 2023. Realizing nearly-zero dark current and ultrahigh signal-to-noise ratio perovskite X-ray detector and image array by dark-current-shunting strategy. Nature Communications, 14(1):626.

[19]KainzK, 2006. Radiation oncology physics: a handbook for teachers and students. Medical Physics, 33(6Part1):1920.

[20]KalagaDV, KulkarniAV, AcharyaR, et al., 2009. Some industrial applications of gamma-ray tomography. Journal of the Taiwan Institute of Chemical Engineers, 40(6):602-612.

[21]KasapSO, 2000. X-ray sensitivity of photoconductors: application to stabilized a-Se. Journal of Physics D: Applied Physics, 33(21):2853-2865.

[22]KimHS, LeeCR, ImJH, et al., 2012. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Scientific Reports, 2(1):591.

[23]KimJ, JungSH, MoonJ, et al., 2012. Development of transportable gamma-ray tomographic system for industrial application. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 693:203-208.

[24]KimYC, KimKH, SonDY, et al., 2017. Printable organometallic perovskite enables large-area, low-dose X-ray imaging. Nature, 550(7674):87-91.

[25]KojimaA, TeshimaK, ShiraiY, et al., 2009. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 131(17):6050-6051.

[26]LeroyC, RancoitaPG, 2011. Principles of Radiation Interaction in Matter and Detection. 3rd Edition. World Scientific, Singapore.

[27]LiMB, LiHY, LiWJ, et al., 2022. Oriented 2D perovskite wafers for anisotropic X-ray detection through a fast tableting strategy. Advanced Materials, 34(8):2108020.

[28]LiX, ZhangP, HuaYQ, et al., 2022. Ultralow detection limit and robust hard X-ray imaging detector based on inch-sized lead-free perovskite Cs₃Bi₂Br₉ single crystals. ACS Applied Materials & Interfaces, 14(7):9340-9351.

[29]LiYL, AdeagboE, KoughiaC, et al., 2022. Direct conversion X-ray detectors with 70 pA cm^-2 dark currents coated from an alcohol-based perovskite ink. Journal of Materials Chemistry C, 10(4):1228-1235.

[30]LinEC, 2010. Radiation risk from medical imaging. Mayo Clinic Proceedings, 85(12):1142-1146.

[31]LiuFZ, WuR, WeiJ, et al., 2022. Recent progress in halide perovskite radiation detectors for gamma-ray spectroscopy. ACS Energy Letters, 7(3):1066-1085.

[32]LiuJY, ShabbirB, WangCJ, et al., 2019. Perovskite X-ray detectors: flexible, printable soft-X-ray detectors based on all-inorganic perovskite quantum dots (Adv. Mater. 30/2019). Advanced Materials, 31(30):1970214.

[33]LiuYC, ZhangYX, ZhuXJ, et al., 2021. Triple-cation and mixed-halide perovskite single crystal for high-performance X-ray imaging. Advanced Materials, 33(8):2006010.

[34]MccallKM, LiuZF, TrimarchiG, et al., 2018. α-particle detection and charge transport characteristics in the A₃M₂I₉ defect perovskites (A = Cs, Rb; M = Bi, Sb). ACS Photonics, 5(9):3748-3762.

[35]NazarenkoO, YakuninS, MoradV, et al., 2017. Single crystals of caesium formamidinium lead halide perovskites: solution growth and gamma dosimetry. NPG Asia Materials, 9(4):e373.

[36]OhKM, KimDK, ShinJW, et al., 2014. Measurement of the electrical properties of a polycrystalline cadmium telluride for direct conversion flat panel X-ray detector. Journal of Instrumentation, 9(1):P01010.

[37]PanL, FengYX, KandlakuntaP, et al., 2020. Performance of perovskite CsPbBr₃ single crystal detector for gamma-ray detection. IEEE Transactions on Nuclear Science, 67(2):443-449.

[38]PanL, LiuZF, WeltonC, et al., 2023. Ultrahigh-flux X-ray detection by a solution-grown perovskite CsPbBr₃ single-crystal semiconductor detector. Advanced Materials, 35(25):2211840.

[39]PanWC, WuHD, LuoJJ, et al., 2017. Cs₂AgBiBr₆ single-crystal X-ray detectors with a low detection limit. Nature Photonics, 11(11):726-732.

[40]PanWC, YangB, NiuGD, et al., 2019. Hot-pressed CsPbBr₃ quasi-monocrystalline film for sensitive direct X-ray detection. Advanced Materials, 31(44):1904405.

[41]PangJC, ZhaoS, DuXY, et al., 2022. Vertical matrix perovskite X-ray detector for effective multi-energy discrimination. Light: Science & Applications, 11(1):105.

[42]PengJL, XiaCQ, XuYL, et al., 2021. Crystallization of CsPbBr₃ single crystals in water for X-ray detection. Nature Communications, 12(1):1531.

[43]RenLQ, ZhengB, LiuH, 2018. Tutorial on X-ray photon counting detector characterization. Journal of X-Ray Science and Technology, 26(1):1-28.

[44]RothwarfA, 1973. Plasmon theory of electron-hole pair production: efficiency of cathode ray phosphors. Journal of Applied Physics, 44(2):752-756.

[45]SafaS, FreyJB, BelevG, et al., 2011. Amorphous and polycrystalline photoconductors for direct conversion flat panel X-ray image sensors. Sensors, 11(5):5112-5117.

[46]SakhatskyiK, TurediB, MattGJ, et al., 2023. Stable perovskite single-crystal X-ray imaging detectors with single-photon sensitivity. Nature Photonics, 17(6):510-517.

[47]ShresthaS, FischerR, MattGJ, et al., 2017. High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nature Photonics, 11(7):436-440.

[48]SpahnM, 2013. X-ray detectors in medical imaging. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 731:57-63.

[49]StoumposCC, MalliakasCD, PetersJA, et al., 2013. Crystal growth of the perovskite semiconductor CsPbBr₃: a new material for high-energy radiation detection. Crystal Growth & Design, 13(7):2722-2727.

[50]SuYR, MaWB, YangY, 2020. Perovskite semiconductors for direct X-ray detection and imaging. Journal of Semiconductors, 41(5):38-47.

[51]TaguchiK, 2017. Energy-sensitive photon counting detector-based X-ray computed tomography. Radiological Physics and Technology, 10(1):8-22.

[52]TaguchiK, IwanczykJS, 2013. Vision 20/20: single photon counting X-ray detectors in medical imaging. Medical Physics, 40(10):100901.

[53]TanZK, MoghaddamRS, LaiML, et al., 2014. Bright light-emitting diodes based on organometal halide perovskite. Nature Nanotechnology, 9(9):687-692.

[54]ThompsonM, EllisonSLR, WoodR, 2002. Harmonized guidelines for single-laboratory validation of methods of analysis (IUPAC technical report). Pure and Applied Chemistry, 74(5):835-855.

[55]TisdaleJT, YohoM, TsaiH, et al., 2020. Methylammonium lead tribromide single crystal detectors towards robust gamma-ray photon sensing. Advanced Optical Materials, 8(10):2000233.

[56]van EijkCWE, 2002. Inorganic scintillators in medical imaging. Physics in Medicine & Biology, 47(8):R85.

[57]WangCF, LiHJ, LiMG, et al., 2021. Centimeter-sized single crystals of two-dimensional hybrid iodide double perovskite (4,4-difluoropiperidinium)4AgBiI8 for high-temperature ferroelectricity and efficient X-ray detection. Advanced Functional Materials, 31(13):2009457.

[58]WangX, ZhaoDW, QiuYP, et al., 2018. PIN diodes array made of perovskite single crystal for X-ray imaging. Physica Status Solidi: Rapid Research Letters, 12(10):1800380.

[59]WeiHT, HuangJS, 2019. Halide lead perovskites for ionizing radiation detection. Nature Communications, 10(1):1066.

[60]WeiHT, FangYJ, MulliganP, et al., 2016. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals. Nature Photonics, 10(5):‍333-339.

[61]WeiHT, DesantisD, WeiW, et al., 2017. Dopant compensation in alloyed CH₃NH₃PbBr_3-xCl_x perovskite single crystals for gamma-ray spectroscopy. Nature Materials, 16(8):826-833.

[62]WeiW, ZhangY, XuQ, et al., 2017. Monolithic integration of hybrid perovskite single crystals with heterogenous substrate for highly sensitive X-ray imaging. Nature Photonics, 11(5):315-321.

[63]WilleminkMJ, PerssonM, PourmortezaA, et al., 2018. Photon-counting CT: technical principles and clinical prospects. Radiology, 289(2):293-312.

[64]WuHD, GeYS, NiuGD, et al., 2021. Metal halide perovskites for X-ray detection and imaging. Matter, 4(1):144-163.

[65]XiaM, YuanJH, NiuG, et al., 2020. Unveiling the structural descriptor of A₃B₂X₉ perovskite derivatives toward X-ray detectors with low detection limit and high stability. Advanced Functional Materials, 30(24):1910648.

[66]XingGC, MathewsN, LimSS, et al., 2014. Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nature Materials, 13(5):476-480.

[67]XuC, ChenH, PerssonM, et al., 2013. Energy resolution of a segmented silicon strip detector for photon-counting spectral CT. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 715:11-17.

[68]XuQ, WangX, ZhangH, et al., 2020. CsPbBr₃ single crystal X-ray detector with schottky barrier for X-ray imaging application. ACS Applied Electronic Materials, 2(4):‍879-884.

[69]XueZX, WeiYR, LiH, et al., 2023. Additive-enhanced crystallization of inorganic perovskite single crystals for high-sensitivity X-ray detection. Small, 19(18):2207588.

[70]YakuninS, SytnykM, KriegnerD, et al., 2015. Detection of X-ray photons by solution-processed lead halide perovskites. Nature Photonics, 9(7):444-449.

[71]YakuninS, DirinDN, ShynkarenkoY, et al., 2016. Detection of gamma photons using solution-grown single crystals of hybrid lead halide perovskites. Nature Photonics, 10(9):585-589.

[72]YeF, LinH, WuHD, et al., 2019. High-quality cuboid CH₃NH₃PbI₃ single crystals for high performance X-ray and photon detectors. Advanced Functional Materials, 29(6):1806984.

[73]YinLX, WuHD, PanWC, et al., 2019. Controlled cooling for synthesis of Cs₂AgBiBr₆ single crystals and its application for X-ray detection. Advanced Optical Materials, 7(19):1900491.

[74]YuanWN, NiuGD, XianYM, et al., 2019. In situ regulating the order–disorder phase transition in Cs₂AgBiBr₆ single crystal toward the application in an X-ray detector. Advanced Functional Materials, 29(20):1900234.

[75]YuanYN, HuangJS, 2016. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability. Accounts of Chemical Research, 49(2):‍286-293.

[76]ZentaiG, 2008. X-ray imaging for homeland security. IEEE International Workshop on Imaging Systems and Techniques, p.1-6.

[77]ZhangBB, LiuX, XiaoB, et al., 2020. High-performance X-ray detection based on one-dimensional inorganic halide perovskite CsPbI₃. The Journal of Physical Chemistry Letters, 11(2):432-437.

[78]ZhangP, HuaYQ, XuYD, et al., 2022. Ultrasensitive and robust 120 keV hard X-ray imaging detector based on mixed-halide perovskite CsPbBr_3-nI_n single crystals. Advanced Materials, 34(12):2106562.

[79]ZhangXJ, ChuDP, JiaBX, et al., 2023. Heterointerface design of perovskite single crystals for high-performance X-ray imaging. Advanced Materials, 36(3):2305513.

[80]ZhangYX, LiuYC, XuZ, et al., 2020. Nucleation-controlled growth of superior lead-free perovskite Cs₃Bi₂I₉ single-crystals for high-performance X-ray detection. Nature Communications, 11(1):2304.

[81]ZhangZ, CaoD, HuangZJ, et al., 2021. Gamma-ray detection using Bi-poor Cs₂AgBiBr₆ double perovskite single crystals. Advanced Optical Materials, 9(8):2001575.

[82]ZhaoJJ, ZhaoL, DengYH, et al., 2020. Perovskite-filled membranes for flexible and large-area direct-conversion X-ray detector arrays. Nature Photonics, 14(10):612-617.

[83]ZhouY, ZhaoL, NiZY, et al., 2021. Heterojunction structures for reduced noise in large-area and sensitive perovskite X-ray detectors. Science Advances, 7(36):eabg6716.

[84]ZhuangRZ, WangXJ, MaWB, et al., 2019. Highly sensitive X-ray detector made of layered perovskite-like (NH₄)₃Bi₂I₉ single crystal with anisotropic response. Nature Photonics, 13(9):602-608.