Similar articles

Abstract: In this paper, we present a method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears, which includes three optimization objectives, three control parameters, and a complex-constrain genetic algorithm solving method. A new set of fundamental equations for pitch cone parameters of hypoid gear drives are established, as well as the relationships between pitch cone and curvature parameters. Based on this theory, three control parameters are selected to determine the pinion tooth surface. A hypoid gear drive is chosen for case studies. The results verify that the optimization methodology can achieve the expected optimization objectives and has good convergence. Correlations between optimization objectives and control parameters are discussed. Furthermore, a finite element model of a simplified hypoid gear drive system is established and its quasi-static meshing characteristics analyzed. The results again confirm the correctness of the optimization method. The effects of torque load on the contact pattern and transmission error are discussed. The results provide a theoretical reference for geometric calculations, quasi-static analysis, and optimal design of spiral bevel and hypoid gears.

This paper covers a proposal of a global optimization methodology of the tooth contact pattern and transmission error of spiral bevel and hypoid gears.

一种螺旋锥齿轮齿面接触区和传动误差的全局优化方法

[1]Achtmann, J., Bär, G., 2004. Optimized bearing ellipses of hypoid gears. Journal of Mechanical Design, 125(4):739-745.

[2]Argyris, J., Fuentes, A., Litvin, F.L., 2002. Computerized integrated approach for design and stress analysis of spiral bevel gears. Computer Methods in Applied Mechanics and Engineering, 191(11-12):1057-1095.

[3]Artoni, A., Bracci, A., Gabiccini, M., et al., 2008. Optimization of the loaded contact pattern in hypoid gears by automatic topography modification. Journal of Mechanical Design, 131(1):011008.

[4]Artoni, A., Kolivand, M., Kahraman, A., 2009. An ease-off based optimization of the loaded transmission error of hypoid gears. Journal of Mechanical Design, 132(1):011010.

[5]Guo, W., Mao, S., Yang, Y., et al., 2016. Optimization of cutter blade profile for face-hobbed spiral bevel gears. The International Journal of Advanced Manufacturing Technology, 85(1):209-216.

[6]Litvin, F.L., Fuentes, A., 2004. Gear Geometry and Applied Theory (2nd Edition). Cambridge University Press, Cambridge, UK, p.627.

[7]Litvin, F.L., Wang, A.G., Handschuh, R.F., 1998. Computerized generation and simulation of meshing and contact of spiral bevel gears with improved geometry. Computer Methods in Applied Mechanics and Engineering, 158(1-2):35-64.

[8]Litvin, F.L., Fuentes, A., Fan, Q., et al., 2002. Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears. Mechanism and Machine Theory, 37(5):441-459.

[9]Litvin, F.L., Fuentes, A., Hayasaka, K., 2006. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears. Mechanism and Machine Theory, 41(1):83-118.

[10]Mermoz, E., Astoul, J., Sartor, M., et al., 2013. A new methodology to optimize spiral bevel gear topography. CIRP Annals — Manufacturing Technology, 62(1):119-122.

[11]Shtipelman, B.A., 1978. Design and Manufacture of Hypoid Gears. John Wiley & Sons, New York, USA.

[12]Simon, V.V., 2009a. Design and manufacture of spiral bevel gears with reduced transmission error. Journal of Mechanical Design, 131(4):041007.

[13]Simon, V.V., 2009b. Head-cutter for optimal tooth modifications in spiral bevel gears. Mechanism and Machine Theory, 44(7):1420-1435.

[14]Simon, V.V., 2013. Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors. Chinese Journal of Aeronautics, 26(3):777-790.

[15]Simon, V.V., 2014. Optimization of face-hobbed hypoid gears. Mechanism and Machine Theory, 77:164-181.

[16]Vogel, O., Griewank, A., Bär, G., 2002. Direct gear tooth contact analysis for hypoid bevel gears. Computer Methods in Applied Mechanics and Engineering, 191(36):3965-3982.

[17]Wu, X.T., 2009. Gear Engagement Principle (2nd Edition). Xi’an Jiaotong University Press, Xi’an, China (in Chinese).

[18]Zeng, T., 1989. Spiral Bevel Gear Design and Processing. Harbin Institute of Technology Press, Harbin, China (in Chinese).

[19]Zhang, T.T., Huang, W., Wang, Z.G., et al., 2016. A study of airfoil parameterization, modeling, and optimization based on the computational fluid dynamics method. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 17(8):632-645.

[20]Zhuo, Y., Zhou, X., 2015. Dynamic characteristic analysis of high-speed spherical ball bearing. Journal of Mechanical Engineering, 51(5):37-46 (in Chinese).