CLC number: X701
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 2017-12-15
Cited: 1
Clicked: 4379
Takashi Sagawa. Conversion of CO2 to useful substances with composite iron, nickel, and copper catalysts[J]. Journal of Zhejiang University Science A, 2018, 19(1): 80-85.
@article{title="Conversion of CO2 to useful substances with composite iron, nickel, and copper catalysts",
author="Takashi Sagawa",
journal="Journal of Zhejiang University Science A",
volume="19",
number="1",
pages="80-85",
year="2018",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1700056"
}
%0 Journal Article
%T Conversion of CO2 to useful substances with composite iron, nickel, and copper catalysts
%A Takashi Sagawa
%J Journal of Zhejiang University SCIENCE A
%V 19
%N 1
%P 80-85
%@ 1673-565X
%D 2018
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1700056
TY - JOUR
T1 - Conversion of CO2 to useful substances with composite iron, nickel, and copper catalysts
A1 - Takashi Sagawa
J0 - Journal of Zhejiang University Science A
VL - 19
IS - 1
SP - 80
EP - 85
%@ 1673-565X
Y1 - 2018
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1700056
Abstract: Composite materials of Fe/Al2O3, which consist of small particles of iron supported by thermally stable alumina even at 500–700 °C, have been widely used in the water-gas shift reaction for natural gas reforming. Therefore, Fe/Al2O3 is one of the promising candidates for re-transformation of exhausted CO2 into fuels such as alcohols and hydrocarbons. The development of a CO2 reforming system using the composite materials of Fe/Al2O3 through CO2 reduction to CO, dissociation of water into hydrogen, and methanol synthesis has been investigated. It was found that dry and steam (i.e. wet) reforming of CO2 produced almost the same amount of CO. At a temperature above 500 °C, maximal and saturated yields of CO and H2 from CO2 and water were obtained. However, this CO2 reforming system requires higher-pressure conditions from several tens to hundreds standard atmospheric pressure in order to achieve high yield and selectivity for methanol production. In this study we developed the modified CO2 reforming system by the utilization of Ni and/or Cu instead of Fe in order to obtain other types of useful products such as CO, CH4, and carbon, more efficiently and selectively under atmospheric pressure. When Ni or Cu was used, conversion of CO2 was reduced to 76%, while 9% of methane was detected in the case of Ni. On the other hand, though the CO2 conversion reduced half of the Fe, the selectivity of CO from CO2 increased to 95% in the case of Cu.
[1]Ando H, Matsumura Y, Souma Y, 2000. Active phase of iron catalyst for alcohol formation in hydrogenation of carbon oxides. Applied Organometallic Chemistry, 14(12):831-835.
[2]Bian G, Koizumi N, Yamada M, 2002. Recent development of Fischer-Tropsch synthesis catalyst. Journal-Japan Institute of Energy, 81(11):974-980.
[3]Chen QW, Bahnemann W, 2000. Reduction of carbon dioxide by magnetite: implications for the primordial synthesis of organic molecules. Journal of the American Chemical Society, 122(5):970-971.
[4]Dry ME, 2002. The Fischer-Tropsch process: 1950-2000. Catalysis Today, 71(3):227-241.
[5]Kodama T, Koyanagi T, Shimizu T, et al., 2001. CO2 reforming of methane in a molten carbonate salt bath for use in solar thermochemical processes. Energy & Fuels, 15(1):60-65.
[6]Luo HY, Zhang W, Zhou HW, et al., 2001. A study of Rh-Sm-V/SiO2 catalysts for the preparation of C2-oxygenates from syngas. Applied Catalysis A: General, 214(2):161-166.
[7]Niederberger M, Bartl MH, Stucky GD, 2002. Benzyl alcohol and transition metal chlorides as a versatile reaction system for the nonaqueous and low-temperature synthesis of crystalline nano-objects with controlled dimensionality. Journal of the American Chemical Society, 124(46):13642-13643.
[8]O’Brien R, Xu L, Bao S, et al., 2000. Activity, selectivity and attrition characteristics of supported iron Fischer-Tropsch catalysts. Applied Catalysis A: General, 196(2):173-178.
Open peer comments: Debate/Discuss/Question/Opinion
<1>