Similar articles

Abstract: Because of potential high energy densities, microfluidic fuel cells can serve as micro-scale power sources. Because microfluidic fuel cells typically operate in the co-laminar flow regime to enable a membrane-less design, they generally suffer from severe mass transfer limitations with respect to diffusion transport. To address this issue, a novel channel design that integrates slanted groove micro-mixers on the side walls of the channel is proposed. Numerical modeling on the design of groove micro-mixers and grooveless design demonstrates a mass transfer enhancement that has a 115% higher limiting current density and well-controlled convective mixing between the oxidant and the fuel streams with the use of slanted groove micro-mixers. Moreover, the growth of the thickness of the depletion boundary layer is found to be terminated within approximately 2 mm from the channel entrance, which is distinct from the constantly growing pattern in the grooveless design. In addition, a simplified mass transfer model capable of modeling the mass transfer prFocess with the presence of the transverse secondary flow is developed. Further, a dimensionless correlation is derived to analyze the effects of the design parameters on the limiting current density. The present theoretical study paves the way towards an optimal design of a microfluidic fuel cell integrating groove micro-mixers.

集成斜槽微混合器以终止耗尽边界层厚度增长的微流体燃料电池

[1]AhmedDH, ParkHB, SungHJ, 2008. Optimum geometrical design for improved fuel utilization in membraneless micro fuel cell. Journal of Power Sources, 185(1):143-152.

[2]BazylakA, SintonD, DjilaliN, 2005. Improved fuel utilization in microfluidic fuel cells: a computational study. Journal of Power Sources, 143(1-2):57-66.

[3]BrushettFR, JayashreeRS, ZhouWP, et al., 2009. Investigation of fuel and media flexible laminar flow-based fuel cells. Electrochimica Acta, 54(27):7099-7105.

[4]ChangMH, ChenFL, FangNS, 2006. Analysis of membraneless fuel cell using laminar flow in a Y-shaped microchannel. Journal of Power Sources, 159(2):810-816.

[5]ChobanER, MarkoskiLJ, WieckowskiA, et al., 2004. Microfluidic fuel cell based on laminar flow. Journal of Power Sources, 128(1):54-60.

[6]ChobanER, WaszczukP, KenisPJA, 2005a. Characterization of limiting factors in laminar flow-based membraneless microfuel cells. Electrochemical and Solid-State Letters, 8(7):A348.

[7]ChobanER, SpendelowJS, GancsL, et al., 2005b. Membraneless laminar flow-based micro fuel cells operating in alkaline, acidic, and acidic/alkaline media. Electrochimica Acta, 50(27):5390-5398.

[8]CohenJL, VolpeDJ, WestlyDA, et al., 2005a. A dual electrolyte H₂/O₂ planar membraneless microchannel fuel cell system with open circuit potentials in excess of 1.4 V. Langmuir, 21(8):3544-3550.

[9]CohenJL, WestlyDA, PechenikA, 2005b. Fabrication and preliminary testing of a planar membraneless microchannel fuel cell. Journal of Power Sources, 139(1-2):96-105.

[10]da MotaN, FinkelsteinDA, KirtlandJD, et al., 2012. Membraneless, room-temperature, direct borohydride/cerium fuel cell with power density of over 0.25 W/cm2. Journal of the American Chemical Society, 134(14):6076-6079.

[11]DyerCK, 2002. Fuel cells for portable applications. Journal of Power Sources, 106(1-2):31-34.

[12]FerrignoR, StroockAD, ClarkTD, et al., 2002. Membraneless vanadium redox fuel cell using laminar flow. Journal of the American Chemical Society, 124(44):12930-12931.

[13]ForbesTP, KraljJG, 2012. Engineering and analysis of surface interactions in a microfluidic herringbone micromixer. Lab on a Chip, 12(15):2634-2637.

[14]GurrolaMP, Escalona-VillalpandoRA, ArjonaN, et al., 2021. Microfluidic fuel cells. In: Encyclopedia of Electrochemistry. Wiley.

[15]HaSM, AhnY, 2014. Laminar flow-based micro fuel cell utilizing grooved electrode surface. Journal of Power Sources, 267:731-738.

[16]HasegawaS, ShimotaniK, KishiK, et al., 2005. Electricity generation from decomposition of hydrogen peroxide. Electrochemical and Solid-State Letters, 8(2):A119-A121.

[17]JayashreeRS, GancsL, ChobanER, et al., 2005. Air-breathing laminar flow-based microfluidic fuel cell. Journal of the American Chemical Society, 127(48):16758-16759.

[18]JayashreeRS, EgasD, SpendelowJS, et al., 2006. Air-breathing laminar flow-based direct methanol fuel cell with alkaline electrolyte. Electrochemical and Solid-State Letters, 9(5):A252.

[19]JayashreeRS, YoonSK, BrushettFR, et al., 2010. On the performance of membraneless laminar flow-based fuel cells. Journal of Power Sources, 195(11):3569-3578.

[20]KirtlandJD, McGrawGJ, StroockAD, 2006. Mass transfer to reactive boundaries from steady three-dimensional flows in microchannels. Physics of Fluids, 18(7):073602.

[21]KirtlandJD, SiegelCR, StroockAD, 2009. Interfacial mass transport in steady three-dimensional flows in microchannels. New Journal of Physics, 11(7):075028.

[22]KjeangE, ProctorBT, BroloAG, et al., 2007a. High-performance microfluidic vanadium redox fuel cell. Electrochimica Acta, 52(15):4942-4946.

[23]KjeangE, RoeschB, McKechnieJ, et al., 2007b. Integrated electrochemical velocimetry for microfluidic devices. Microfluidics and Nanofluidics, 3(4):403-416.

[24]KjeangE, McKechnieJ, SintonD, et al., 2007c. Planar and three-dimensional microfluidic fuel cell architectures based on graphite rod electrodes. Journal of Power Sources, 168(2):379-390.

[25]KjeangE, MichelR, HarringtonDA, et al., 2008. A microfluidic fuel cell with flow-through porous electrodes. Journal of the American Chemical Society, 130(12):4000-4006.

[26]KjeangE, DjilaliN, SintonD, 2009. Microfluidic fuel cells: a review. Journal of Power Sources, 186(2):353-369.

[27]KunduA, JangJH, GilJH, et al., 2007. Micro-fuel cells—current development and applications. Journal of Power Sources, 170(1):67-78.

[28]LeeJ, LimKG, PalmoreGTR, et al., 2007. Optimization of microfluidic fuel cells using transport principles. Analytical Chemistry, 79(19):7301-7307.

[29]LeeJW, KjeangE, 2013. Nanofluidic fuel cell. Journal of Power Sources, 242:472-477.

[30]LeeSW, AhnY, 2015. Influence of electrode groove geometry on the passive control of the depletion layer in microfluidic fuel cells. Journal of Micromechanics and Microengineering, 25(12):127001.

[31]LynnNS, DandyDS, 2007. Geometrical optimization of helical flow in grooved micromixers. Lab on a Chip, 7(5):580-587.

[32]MarschewskiJ, JungS, RuchP, et al., 2015. Mixing with herringbone-inspired microstructures: overcoming the diffusion limit in co-laminar microfluidic devices. Lab on a Chip, 15(8):1923-1933.

[33]MarschewskiJ, RuchP, EbejerN, et al., 2017. On the mass transfer performance enhancement of membraneless redox flow cells with mixing promoters. International Journal of Heat and Mass Transfer, 106:884-894.

[34]ModestinoMA, Fernandez RivasD, HashemiSMH, et al., 2016. The potential for microfluidics in electrochemical energy systems. Energy & Environmental Science, 9(11):3381-3391.

[35]Moreno-ZuriaA, Ortiz-OrtegaE, GurrolaMP, et al., 2017. Evolution of microfluidic fuel stack design as an innovative alternative to energy production. International Journal of Hydrogen Energy, 42(46):27929-27939.

[36]NasharudinMN, KamarudinSK, HasranUA, et al., 2014. Mass transfer and performance of membrane-less micro fuel cell: a review. International Journal of Hydrogen Energy, 39(2):1039-1055.

[37]NewmanJ, 1968. Engineering design of electrochemical systems. Industrial and Engineering Chemistry, 60(4):12-27.

[38]NguyenNT, ChanSH, 2006. Micromachined polymer electrolyte membrane and direct methanol fuel cells—a review. Journal of Micromechanics and Microengineering, 16(4):R1-R12.

[39]ShaeghSAM, NguyenNT, ChanSH, 2011. A review on membraneless laminar flow-based fuel cells. International Journal of Hydrogen Energy, 36(9):5675-5694.

[40]ShaeghSAM, NguyenNT, ChanSH, et al., 2012. Air-breathing membraneless laminar flow-based fuel cell with flow-through anode. International Journal of Hydrogen Energy, 37(4):3466-3476.

[41]StroockAD, McgrawGJ, 2004. Investigation of the staggered herringbone mixer with a simple analytical model. Philosophical Transactions of the Royal Society of A: Mathematical, Physical and Engineering Sciences, 362(1818):971-986.

[42]StroockAD, DertingerSK, WhitesidesGM, et al., 2002. Patterning flows using grooved surfaces. Analytical Chemistry, 74(20):5306-5312.

[43]TsuchiyaH, KobayashiO, 2004. Mass production cost of PEM fuel cell by learning curve. International Journal of Hydrogen Energy, 29(10):985-990.

[44]XuanJ, LeungDYC, LeungMKH, et al., 2011. Chaotic flow-based fuel cell built on counter-flow microfluidic network: predicting the over-limiting current behavior. Journal of Power Sources, 196(22):9391-9397.

[45]YoonSK, FichtlGW, KenisPJA, 2006. Active control of the depletion boundary layers in microfluidic electrochemical reactors. Lab on a Chip, 6(12):1516-1524.