CLC number: TP242
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 2017-10-29
Cited: 0
Clicked: 5968
Roger Bostelman, Elena Messina, Sebti Foufou. Cross-industry standard test method developments: from manufacturing to wearable robots[J]. Frontiers of Information Technology & Electronic Engineering, 2017, 18(10): 1447-1457.
@article{title="Cross-industry standard test method developments: from manufacturing to wearable robots",
author="Roger Bostelman, Elena Messina, Sebti Foufou",
journal="Frontiers of Information Technology & Electronic Engineering",
volume="18",
number="10",
pages="1447-1457",
year="2017",
publisher="Zhejiang University Press & Springer",
doi="10.1631/FITEE.1601316"
}
%0 Journal Article
%T Cross-industry standard test method developments: from manufacturing to wearable robots
%A Roger Bostelman
%A Elena Messina
%A Sebti Foufou
%J Frontiers of Information Technology & Electronic Engineering
%V 18
%N 10
%P 1447-1457
%@ 2095-9184
%D 2017
%I Zhejiang University Press & Springer
%DOI 10.1631/FITEE.1601316
TY - JOUR
T1 - Cross-industry standard test method developments: from manufacturing to wearable robots
A1 - Roger Bostelman
A1 - Elena Messina
A1 - Sebti Foufou
J0 - Frontiers of Information Technology & Electronic Engineering
VL - 18
IS - 10
SP - 1447
EP - 1457
%@ 2095-9184
Y1 - 2017
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/FITEE.1601316
Abstract: Manufacturing robotics is moving towards human-robot collaboration with light duty robots being used side by side with workers. Similarly, exoskeletons that are both passive (spring and counterbalance forces) and active (motor forces) are worn by humans and used to move body parts. exoskeletons are also called ‘wearable robots’ when they are actively controlled using a computer and integrated sensing. Safety standards now allow, through risk assessment, both manufacturing and wearable robots to be used. However, performance standards for both systems are still lacking. Ongoing research to develop standard test methods to assess the performance of manufacturing robots and emergency response robots can inspire similar test methods for exoskeletons. This paper describes recent research on performance standards for manufacturing robots as well as search and rescue robots. It also discusses how the performance of wearable robots could benefit from using the same test methods.
[1]Asín-Prieto, G., Shimoda, S., González, J., et al., 2015. Testing the generation of speed-dependent gait trajectories to control a 6DoF overground exoskeleton. LNCS, 9245: 495-501.
[2]Bostelman, R.V., 2010. International standards efforts towards safe accessibility technology for persons with disabilities: cross-industry activities. Stand. Eng.
[3]Bostelman, R.V., Falco, J.A., 2012. Survey of industrial manipulation technologies for autonomous assembly applications. NISTIR 7844, Intelligent Systems Division, National Institute of Standards and Technology, Gaithersburg, USA.
[4]Bostelman, R.V., Hong, T.H., Messina, E.R., 2015. Intelligence level performance standards research for autonomous vehicles. Int. Robot Systems Workshop, p.48-54.
[5]Campbell, P., 2007. Revolutionizing Prosthetics 2009 Team Delivers First DARPA Limb Prototype. Applied Physics Laboratory, Johns Hopkins University. http://www.jhuapl.edu/newscenter/pressreleases/2007/070426.asp
[6]Dale, B., 2014. A New Industry Flexes its Servos. http://fortune.com/2014/08/27/exoskeletons-wearable-robotics/
[7]Falco, J.A., van Wyk, K., Messina, E., 2013. Performance Metrics and Benchmarks to Advance the State of Robotic Grasping. http://www.nist.gov/el/isd/grasp.cfm
[8]Falco, J.A., Marvel, J.A., Messina, E.R., 2014. A Roadmap to Advance Measurement Science in Robot Dexterity and Manipulation. NISTIR 7993, Intelligent Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, USA.
[9]Falco, J.A., van Wyk, K., Liu, S., et al., 2015. Grasping the performance: facilitating replicable performance measures via benchmarking and standardized methodologies. IEEE Robot. Autom. Mag., 22(4):125-136.
[10]Favetto, A., Ambrosio, E.P., Appendino, S., et al., 2012. Embedding an exoskeleton hand in the astronaut’s EVA glove: feasibility and ideas. Int. J. Aerosp. Sci., 1(4): 68-76.
[11]Fryman, J., Matthias, B., 2012. Safety of industrial robots: from conventional to collaborative applications. Proc. 7th German Conf. on Robotics, p.1-5.
[12]Guo, Q., Zhang, X.G., Jiang, D., et al., 2012. Hydraulic pressure control system simulation and performance test of lower extremity exoskeleton. LNCS, 7621:612-620.
[13]Herr, H., 2009. Exoskeletons and orthoses: classification, design challenges and future directions. J. Neuroeng. Rehabil., 6:21.
[14]Jacoff, A., 2013. Robotics Test Facility. http://www.nist.gov/el/isd/ms/roboticsbldg.cfm
[15]Jacoff, A.S., Messina, E.R., Evans, J., 2001. Experiences in deploying test arenas for mobile autonomous robots. Performance Measurement for Intelligent Measurement Systems Workshop, p.1-8.
[16]Leber, J., 2014. A Wearable Robot Suit That Will Add Power to Your Step. http://www.fastcoexist.com/3035535/a-wearable-robot-suit-that-will-add-power-to-your-step
[17]Liu, X.P., Low, K.H., Yu, H.Y., 2004. Development of a lower extremity exoskeleton for human performance enhancement. Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, p.3889-3894.
[18]Maciejasz, P., Eschweiler, J., Gerlach-Hahn, K., et al., 2014. A survey on robotic devices for upper limb rehabilitation. J. Neuroeng. Rehabil., 11:3.
[19]Marvel, J., Bostelman, R.V., Bagchi, S., et al., 2014. Performance of Collaborative Robot Systems Project. http://www.nist.gov/el/isd/ms/pcrs.cfm
[20]McDonald, G., 2014. ‘Aliens’-Style Exoskeleton Gives Shipbuilders a Boost. http://mashable.com/2014/08/05/daewoo-exoskeleton
[21]Messina, E., Jacoff, A., Scholtz, J., et al., 2005. Statement of Requirements for Urban Search and Rescue Robot Performance Standards. http://www.nist.gov/el/isd/ms/upload/Prelim_Requirements_Report.pdf
[22]Repperger, D.W., Remis, S.J., Merrill, G., 1990. Performance measures of teleoperation using an exoskeleton device. Proc. IEEE Int. Conf. on Robotics and Automation. p.552-557.
[23]Sarakoglou, I., Kousidou, S., Tsagarakis, N.G., et al., 2007. Exoskeleton-based exercisers for the disabilities of the upper arm and hand. In: Kommu, S.S. (Ed.), Rehabilitation Robotics. InTech, London, UK.
[24]Schabowsky, C.N., Godfrey, S.B., Holley, R.J., et al., 2010. Development and pilot testing of HEXORR: Hand EXOskeleton Rehabilitation Robot. J. Neuroeng. Rehabil., 7:36.
[25]Stinson, L., 2014. Navy’s Exoskeleton Could Make Workers 20 Times More Productive. http://www.wired.com/2014/ 09/navys-exoskeleton-could-make-workers-20-times-more-productive/
[26]Szondy, D., 2015. Harmony Rehab Robot Guides Recovery. http://www.gizmag.com/harmony-rehab-robot/37293/
[27]Tucker, P., 2015. The Very Real Future of Iron Man Suits for the Navy. http://www.defenseone.com/technology/2015/01/very-real-future-iron-man-suits-navy/102630/
[28]Wolff, J., Parker, C., Borisoff, J., et al., 2014. A survey of stakeholder perspectives on exoskeleton technology. J. Neuroeng. Rehabil., 11:169.
Open peer comments: Debate/Discuss/Question/Opinion
<1>