Full Text:
<2591>
CLC number: TP391.72
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 0000-00-00
Cited: 2
Clicked: 5252
A robust tolerance design method based on process capability
| |||||||||||||
CAO Yan-long, YANG Jiang-xin, WU Zhao-tong, WU Li-qun. A robust tolerance design method based on process capability[J]. Journal of Zhejiang University Science A, 2004, 5(1): 81-85.
@article{title="A robust tolerance design method based on process capability",
author="CAO Yan-long, YANG Jiang-xin, WU Zhao-tong, WU Li-qun",
journal="Journal of Zhejiang University Science A",
volume="5",
number="1",
pages="81-85",
year="2004",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2004.0081"
}
%0 Journal Article
%T A robust tolerance design method based on process capability
%A CAO Yan-long
%A YANG Jiang-xin
%A WU Zhao-tong
%A WU Li-qun
%J Journal of Zhejiang University SCIENCE A
%V 5
%N 1
%P 81-85
%@ 1869-1951
%D 2004
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2004.0081
TY - JOUR
T1 - A robust tolerance design method based on process capability
A1 - CAO Yan-long
A1 - YANG Jiang-xin
A1 - WU Zhao-tong
A1 - WU Li-qun
J0 - Journal of Zhejiang University Science A
VL - 5
IS - 1
SP - 81
EP - 85
%@ 1869-1951
Y1 - 2004
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2004.0081
Abstract: This paper presents a method for robust tolerance design in terms of process capability Indices (PCI). The component tolerance and the suitable manufacturing processes can be selected based on the real manufacturing context. The robustness of design feasibility under the effect of uncertainties is also discussed. A comparison between the results obtained by the proposed model and other methods indicates that robust and reliable tolerance can be obtained.
[1] Du, X.P. and Chen, W., 2000. Towards a Better Understanding of Modeling Feasibility Robustness in Engineering Design. J. of Mech. Des., 122:385-394.
[2] He, J.M., 1996. Computer-aided Tolerance Design Based on Fundamental Equation. Hangzhou (Master's dissert), Zhejiang University (in Chinese).
[3] Huang, P.J. and Yang, J.X., 2000. The research of the optimized process tolerance design based on process capacity index. Engineering design, 3:45-47(in Chinese).
[4] Ji, S.P., Sun, X.H. and Ma, Y.L., 1999. A statistic tolerance analyzing method based on manufacturing context. Chinese Mechanical engineering, 10(3):249-252(in Chinese).
[5] Lee, Y.H., Wei, C.C. and Chang, C., 1999. Fuzzy design of process tolerances to maximize process capability. Int. J. Adv. Manuf. Technol, 15:655-659.
[6] Lee, Y.C. and, Wei, C.C., 1998. Process Capability-Based Tolerance Design to Minimize Manufacturing Loss. Int. J. Adv. Manuf. Technol.,14:33-37.
[7] Li, W., BAI, G. and Zhang,C., 2000. Optimization of machining datum selection and machining tolerance allocation with genetic algorithms. Int. J. Prod. Res., 38(6):1407-1424.
[8] Wu, Z.T. and Yang, J.X., 1999. Computer Aided Tolerance Design. Zhejiang University Press, Hangzhou(in Chinese).
[9] Zhang, G., 1996. Simultaneous Tolerancing for design and manufacturing. Int. J. Prod. Res., 34(12):3361-3382.
[10] Zhang, Y., 1999. Predict and assure the matchable degree in selective assembly via PCI-based tolerance. J. of Manu. Sci. and Eng., 121:494-500.
Open peer comments: Debate/Discuss/Question/Opinion
<1>