Similar articles

Abstract: The bender element testing features its in-plane directivity, which allows using bender elements to measure the shear wave velocities in a wider range of in-plane configurations besides the standard tip-to-tip alignment. This paper proposed a novel bender element testing technique for measuring the horizontal shear wave velocity of soils, where the bender elements are surface-mounted and the axes of the source and receiver elements are parallel to each other. The preliminary tests performed on model ground of silica sand showed that, by properly determining the travel distance and time of the shear waves, the surface-mounted bender elements can perform as accurately as the conventional “tip-to-tip” configuration. Potentially, the present system provides a promising nondestructive tool for characterizing geomaterials and site conditions both in laboratory and in the fields.

[1] Arulrajah, A., Nikraz, H., Bo, M., 2006. Assessment of marine clay improvement under reclamation fills by in-situ testing methods. Geotechnical and Geological Engineering, 24(2):219-226.

[2] Asaka, Y., Abe, T., Katsura, Y., 2007. Non-destructive Technique Using Bender Elements to Inspect the Strength of Cement-treated Ground. In: Som, N., Madhav, M. (Eds.), 13th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering. Kolkata, India, 1:855-858.

[3] Bartake, P.P., Singh, D.N., 2007. Studies on the determination of shear wave velocity in sands. Geomechanics and Geoengineering, 2(1):41-49.

[4] Brignoli, E.G.M., Gotti, M., Stokoe, K.H., 1996. Measurement of shear waves in laboratory specimens by means of piezoelectric transducers. Geotechnical Testing Journal, 19(4):384-397.

[5] Cha, M., Cho, G.C., 2007. Shear strength estimation of sandy soils using shear wave velocity. Geotechnical Testing Journal, 30(6):484-495.

[6] Chen, Y.M., Zhou, Y.G., 2006. Technique standardization of bender elements and international parallel test. ASCE Geotechnical Special Publication, 150:90-97.

[7] Clayton, C.R.I., Theron, M., Best, A.I., 2004. The measurement of vertical shear-wave velocity using side-mounted bender elements in the triaxial apparatus. Géotechnique, 54(7):495-498.

[8] Kawaguchi, T., Mitachi, T., Shibuya, S., 2001. Evaluation of Shear Wave Travel Time in Laboratory Bender Element Test. Proceedings of the Fifteenth International Conference on Soil Mechanic and Geotechnical Engineering, 1:155-158.

[9] Kuwano, R., Jardine, R.J., 2002. On the applicability of cross-anisotropic elasticity to granular materials at very small strains. Géotechnique, 52(10):727-749.

[10] Landon, M.M., de Groot, D.J., Sheahan, T.C., 2007. Nondestructive sample quality assessment of a soft clay using shear wave velocity. Journal of Geotechnical and Geoenvironmental Engineering, 133(4):424-432.

[11] Lee, C.J., Huang, H.Y., 2007. Wave velocities and their relation to fabric evolution during the shearing of sands. Soil Dynamics and Earthquake Engineering, 27(1):1-13.

[12] Lee, J.S., Santamarina, J.C., 2005. Bender elements: performance and signal interpretation. Journal of Geotechnical and Geoenvironmental Engineering, 131(9):1063-1070.

[13] Lee, J.S., Santamarina, J.C., 2006. Seismic monitoring short-duration events: liquefaction in 1g models. Canadian Geotechnical Journal, 44(6):659-672.

[14] Pennington, D.S., Nash, D.F.T., Lings, M.L., 2001. Horizontally mounted bender elements for measuring anisotropic shear moduli in triaxial clay specimens. Geotechnical Testing Journal, 24(2):133-144.

[15] Santamarina, J.C., Klein, K.A., Fam, M.A., 2001. Soils and Waves: Particulate Materials Behavior, Characterization and Process Monitoring. John Wiley and Sons, UK, p.217-299.

[16] Sasitharan, S., Robertson, P.K., Sego, D.C., 1994. Sample disturbance from shear wave velocity measurements. Canadian Geotechnical Journal, 31(1):119-124.

[17] Sawangsuriya, A., Biringen, E., Fratta, D., Bosscher, P.J., Edil, T.B., 2006. Dimensionless limits for the collection and interpretation of wave propagation data in soils. ASCE Geotechnical Special Publication, 149:160-166.

[18] Viggiani, G., Atkinson, J.H., 1995. Interpretation of bender element tests. Géotechnique, 45(1):149-154.

[19] Wang, Y.H., Yan, W.M., Lo, K.F., 2006. Damping ratio measurements by the spectral ratio method. Canadian Geotechnical Journal, 43(11):1180-1194.

[20] Yamashita, S., Fujiwara, T., Kawaguchi, T., Mikami, T., Nakata, Y., Shibuya, S., 2007. International Parallel Test on the Measurement of Gmax Using Bender Elements Organized by TC-29. ISSMGE TC-29 Report, p.1-76.

[21] Zhou, Y.G., Chen, Y.M., 2005. Influence of seismic cyclic loading history on small strain shear modulus of saturated sands. Soil Dynamics and Earthquake Engineering, 25(5):341-353.

[22] Zhou, Y.G., Chen, Y.M., 2007. Laboratory investigation on assessing liquefaction resistance of sandy soils by shear wave velocity. Journal of Geotechnical and Geoenvironmental Engineering, 133(8):959-972.

[23] Zhou, Y.G., Chen, Y.M., Ding, H.J., 2005a. Analytical solutions to piezoelectric bimorphs based on improved FSDT beam model. Smart Structures and Systems, 1(3):309-324.

[24] Zhou, Y.G., Chen, Y.M., Ke, H., 2005b. Correlation of liquefaction resistance with shear wave velocity based on laboratory study using bender element. Journal of Zhejiang University SCIENCE, 6A(8):805-812.

[25] Ziv, M., 2003a. The response of an elastic half-space under a momentary shear line impulse. International Journal for Numerical and Analytical Methods in Geomechanics, 27(3):207-232.

[26] Ziv, M., 2003b. Source signature and elastic waves in a half-space under a momentary shear line impulse. International Journal for Numerical and Analytical Methods in Geomechanics, 27(3):233-258.