Similar articles

Abstract: In a landfill, excessive tensile strains or failure of the liner system due to localized subsidence underneath the geosynthetic liner, is a concern in design and operation of the landfill. The localized subsidence can be commonly withstood by reinforcements such as geogrids. A total of nine model tests were carried out to study the influence of soil arching in overburden sandy soil on the geosynthetics and the interaction between the soil and the geosynthetics. The localized subsidence was modeled by a strip trapdoor under the geosynthetic reinforcements. The reinforcement includes several layers of polyvinylchlorid (PVC) membrane or both PVC membrane and a compacted clay layer. Test results show that the vertical soil pressure acting on the geosynthetics within the subsidence zone is strongly related to the deflection of the geosynthetics. The soil pressure acting on the deflected geosynthetics will decrease to a minimum value with respect to its deflection if the final deflection is large enough, and this minimum value is almost independent of the overburden height. Otherwise, the deflection of geosynthetics cannot result in a full degree of soil arching, and the soil pressure within the subsidence zone increases with the increase of overburden height. Deflections and strains of the geosynthetics obviously decrease with the increase of their tensile stiffness. The presence of a compacted clay layer buffer can therefore reduce both deflections and strains of the geosynthetics. Finally, a composite liner structure is recommended for landfills to withstand the localized subsidences.

[1]ASTM Standard D4595-2009. Standard Test Method for Tensile Properties of Geotextiles by the Wide Width Strip Method. ASTM International, West Conshohocken, PA.

[2]Aubertin, M., Li, L., Arnoldi, S., Simon, R., 2003. Interaction between Backfill and Rock Mass in Narrow Slopes. Soil and Rock Mechanics America, p.1157-1164.

[3]Briançon, L., Villard, P., 2008. Design of geosynthetic-reinforced platforms spanning localized sinkholes. Geotextiles and Geomembranes, 26(5):416-428.

[4]Chen, R.P., Xu, Z.Z., Chen, Y.M., Ling, D.S., Zhu, B., 2010. Field tests on pile-supported embankments over soft ground. Journal of Geotechnical and Geoenvironmental Engineering, 136(6):777-785.

[5]Chen, R.X., Zhu, B., Chen, Y.M., Chen, R.P., 2010. Modified Terzaghi loosening earth pressure based on theory of main stress axes rotation. Rock and Soil Mechanics, 31(5):1402-1406 (in Chinese).

[6]Chen, Y.M., Cao, W.P., Chen, R.P., 2008. An experimental investigation of soil arching within basal reinforced and unreinforced piled embankments. Geotextiles and Geomembranes, 26(2):164-174.

[7]Chew, S.H., Phoon, H.L., Le Hello, B., 2006. Geosynthetic Reinforced Piled Embankment-Large-Scale Model Tests and Numerical Modeling. 8th International Conference on Geosynthetics, Kuwano, J., Koseki J. (Eds.), Yokohama, Japan, p.901-904.

[8]van Eekelen, S.J.M., Van, M.A., Bezuijen, A., 2007. The Kyoto Road, a Full-Scale Test, Measurements and Calculations. 14th European Conference on Soil Mechanics and Geotechnical Engineering, Madrid, Millpress, Rotterdam, p.1533-1538.

[9]Giroud, J.P., Bonaparte, R., Beech, J.F., Gross, B.A., 1990. Design of soil layer-geosynthetic systems overlying voids. Geotextiles and Geomembranes, 9(1):11-50.

[10]Handy, R.L., 1985. The arch in soil arching. Journal of Geotechnical Engineering, 111(3):302-318.

[11]Hu, M.Y., Chen, Y.M., 2001. Engineering aspects of landfilling municipal solid waste. Journal of Zhejiang University, 2(1):34-40.

[12]Jang, D.J., Montero, C., 1993. Design of liner systems under vertical expansions: an alternative to geogrids. Proceedings of Geosynthetics, 3:1487-1510.

[13]Jessberger, H.L., Stone, K.J.L., 1991. Subsidence effects on clay barriers. Geotechnique, 41(2):185-195.

[14]Kuo, S.S., Desai, K., Rivera, L., 2005. Design method for municipal solid waste landfill liner system subjected to sinkhole cavity under landfill site. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 9(4):281-291.

[15]Qian, X.D., Koerner, R.M., Gray, D.H., 2001. Geotechnical Aspects of Landfill Design and Construction. Prentice-Hall Inc, New Jersey.

[16]Terzaghi, K., 1943. Theoretical Soil Mechanics. John Wiley and Sons, Inc, New York, p.37-42.

[17]Villard, P., Briançon, L., 2008. Design of geosynthetic reinforcements for platforms subjects to localized sinkholes. Canadian Geotechnical Journal, 45(2):l96-209.

[18]Viswanadham, B.V.S., Mahajan, R.R., 2007. Centrifuge model tests on geotextile-reinforced slopes. Geosynthetics International, 14(6):365-378.

[19]Zhan, L.T., Chen, Y.M., Lin, W.A., 2008. Shear strength characterization of municipal solid waste at the Suzhou Landfill, China. Engineering Geology, 97(3-4):97-111.

[20]Zhu, B., Chen, R.X., Chen, Y.M., Gao, D., 2009. Action mechanism and design method of horizontal reinforcement subjected to trench void. China Journal of Highway and Transport, 22(1):11-16 (in Chinese).

[21]Zornberg, J.G., Arriaga, F., 2003. Strains distribution within geosynthetic-reinforced slopes. Journal of Geotechnical and Geoenvironmental Engineering, 129(1):32-45.