JZUS - Journal of Zhejiang University SCIENCE

Journal of Zhejiang University SCIENCE C 2012 Vol.13 No.11 P.866-874

http://doi.org/10.1631/jzus.C1200164

A fault tolerant single sided matrix converter for flight control actuation systems

Author(s): Xiao-yan Huang, Mao-jing Jin, Jian-cheng Zhang, Qin-fen Lu, You-tong Fang, Andrew Goodman, Chris Gerada
Affiliation(s): College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China; more
Corresponding email(s): eezxh@zju.edu.cn, luqinfen@zju.edu.cn
Key Words: Single sided matrix converter, Fault tolerance, Flight control actuation systems

Share this article to： More <<< Previous Article \|

Abstract: We describe a single sided matrix converter (SSMC) designed for safety critical applications like flight control actuation systems. Dynamic simulations of multi-phase SSMC using Matlab Simulink are carried out to evaluate the fault tolerance capabilities. Investigation into different numbers of phases and power converter topologies under single phase open circuit, single switch open circuit, and single switch short circuit has been executed. The simulation results confirm 5-phase SSMC design as a compromise between fault tolerance and converter size/volume. A 5-phase SSMC prototype was built. Experimental results verify the effectiveness of our design.

Reference

[1]Argile, R.N., Mecrow, B.C., Atkinson, D.J., Jack, A.G., Sangha, P., 2008. Reliability Analysis of Fault Tolerant Drive Topologies. 4th IET Int. Conf. on Power Electronics Machines and Drives, p.11-15.

[2]Aten, M., Towers, G., Whitley, C., Wheeler, P., Clare, J., Bradley, K., 2006. Reliability comparison of matrix and other converter topologies. IEEE Trans. Aerosp. Electron. Syst., 42(3):867-875.

[3]Bennett, J.W., Mecrow, B.C., Jack, A.G., Atkinson, D.J., 2010. A prototype electrical actuator for aircraft flaps. IEEE Trans. Ind. Appl., 46(3):915-921.

[4]Bennett, J.W., Mecrow, B.C., Atkinson, D.J., Atkinson, G.J., 2011. Safety-critical design of electromechanical actuation systems in commercial aircraft. IET Electr. Power Appl., 5(1):37-47.

[5]Bennett, J.W., Atkinson, G.J., Mecrow, B.C., Atkinson, D.J., 2012. Fault-tolerant design considerations and control strategies for aerospace drives. IEEE Trans. Ind. Electron., 59(5):2049-2058.

[6]Bianchi, N., Bolognani, S., Zigliotto, M., Zordan, M., 2003. Innovative remedial strategies for inverter faults in IPM synchronous motor drives. IEEE Trans. Energy Conv., 18(2):306-314.

[7]Churn, P.M., Maxwell, C.J., Schofield, N., Howe, D., Powell, D.J., 1998. Electro-Hydraulic Actuation of Primary Flight Control Surfaces. IEE Colloquium on All Electric Aircraft, p.3/1-3/5.

[8]de Araujo Ribeiro, R.L., Jacobina, C.B., da Silva, E.R.C., Lima, A.M.N., 2004. Fault-tolerant voltage-fed PWM inverter AC motor drive systems. IEEE Trans. Ind. Electron., 51(2):439-446.

[9]de Lillo, L., Empringham, L., Wheeler, P.W., Khwan-on, S., Gerada, C., Othman, M.N., Huang, X.Y., 2010. Multiphase power converter drive for fault-tolerant machine development in aerospace applications. IEEE Trans. Ind. Electron., 57(2):575-583.

[10]Errabelli, R., Mutschler, P., 2012. Fault tolerant voltage source inverter for permanent magnet drives. IEEE Trans. Power Electron., 27(2):500-508.

[11]Gerada, C., Bradley, K.J., 2008. Integrated PM machine design for an aircraft EMA. IEEE Trans. Ind. Electron., 55(9):3300-3306.

[12]Goodman, A.S., 2007. Evaluation of the Single Sided Matrix Converter Driven Switched Reluctance Motor. PhD Thesis, University of Nottingham, Nottingham, England.

[13]Huang, X., Bradley, K.J., Goodman, A.S., Gerada, C., Wheeler, P., Clare, J., Whitley, C., 2007. Fault-Tolerance Analysis of Multi-phase Single Sided Matrix Converter for Brushless DC Drives. IEEE Int. Symp. on Industrial Electronics, p.3168-3173.

[14]Huang, X., Goodman, A., Gerada, C., Fang, Y., Lu, Q., 2012. Design of a five-phase brushless DC motor for a safety critical aerospace application. IEEE Trans. Ind. Electron., 59(9):3532-3541.

[15]Khwan-on, S., de Lillo, L., Empringham, L., Wheeler, P., 2012. Fault-tolerant matrix converter motor drives with fault detection of open switch faults. IEEE Trans. Ind. Electron., 59(1):257-268.

[16]Kwak, S., 2012. Four-leg-based fault-tolerant matrix converter schemes based on switching function and space vector methods. IEEE Trans. Ind. Electron., 59(1):235-243.

[17]Kwak, S., Toliyat, H.A., 2007. An approach to fault-tolerant three-phase matrix converter drives. IEEE Trans. Energy Conv., 22(4):855-863.

[18]Shahbazi, M., Poure, P., Saadate, S., Zolghadri, M., 2012. Fault tolerant five-leg converter topology with FPGA-based reconfigurable control. IEEE Trans. Ind. Electron., PP(99).

[19]Vaseghi, B.N., Takorabet, N., Caron, J.P., Nahid-Mobarakeh, B., Meibody-Tabar, F., Humbert, G., 2011. Study of different architectures of fault-tolerant actuator using a two-channel PM motor. IEEE Trans. Ind. Appl., 47(1):47-54.

[20]Villani, M., Tursini, M., Fabri, G., Castellini, L., 2010. Multi-phase Fault Tolerant Drives for Aircraft Applications. Electrical Systems for Aircraft, Railway and Ship Propulsion, p.1-6.

[21]Wheeler, P.W., Rodriguez, J., Clare, J.C., Empringham, L., Weinstein, A., 2002. Matrix converters: a technology review. IEEE Trans. Ind. Electron., 49(2):276-288.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Similar articles

- Go to

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference