Similar articles

Abstract: We propose a new design scheme for a Booth encoder based on clocked transmission gate adiabatic logic (CTGAL). In the new design the structural complexity of the Booth encoder is reduced while the speed of the multiplier is improved. The adiabatic two’s complement multiplier-accumulator (MAC) is furthermore a design based on the CTGAL. The computer simulation results indicate that the designed circuit has the correct logic function and remarkably less energy consumption compared to that of the MAC based on complementary metal oxide semiconductor (CMOS) logic.

[1] Arsalan, M., Shams, M., 2005. Charge-recovery Power Clock Generators for Adiabatic Logic Circuits. Proc. 18th Int. Conf. on VLSI Design held jointly with 4th Int. Conf. on Embedded Systems Design, p.171-174.

[2] Blotti, A., Saletti, R., 2004. Ultralow-power adiabatic circuit semi-custom design. IEEE Tran. VLSI Syst., 12(11): 1248-1253.

[3] Choi, Y., Swartzlander, E.E.Jr., 2005. Parallel Prefix Adder Design with Matrix Representation. Proc. 17th IEEE Symp. on Computer Arithmetic, Cape Cod, p.90-98.

[4] Fang, Z.X., Wang, P.J., Liu, Y., 2003. Universal circuits theory for binary, multiple-value and adiabatic circuits. Acta Electron. Sin., 31(2):303-305.

[5] Li, S., Zhou, F., Chen, C.H., Chen, H., Wu, Y.P., 2007. Quasi-static Energy Recovery Logic with Single Power-Clock Supply. IEEE Int. Symp. on Circuits and Systems, New Orleans, LA, p.2124-2127.

[6] Park, J., Hong, S.J., Kim, J., 2005. Energy-saving Design Technique Achieved by Latched Pass-transistor Adiabatic Logic. Proc. IEEE Int. Symp. on Circuits and System, Kobe, Japan, p.4693-4696.

[7] Pedram, M., Wu, Q., 1999. Design Considerations for Battery-Powered Electronics. Proc. 36th Design Automation Conf., p.861-866.

[8] Prasad, K., Parhi, K.K., 2001. Low-power 4-2 and 5-2 Compressors. IEEE Conf. Record of the 35th Asilomar Conf. on Signals, Systems, and Computers, Lexington, MA, USA, p.129-133.

[9] Suvakovic, D., Salama, C.A.T., 2003. Energy efficient adiabatic multiplier-accumulator design. J. VLSI Signal Processing Syst., 33(1-2):83-103.

[10] Wang, P.J., Yu, J.J., 2006. Design of clocked transmission gate adiabatic logic circuit and SRAM. 8th Int. Conf. on Solid-State and Integrated Circuit Technology, Shanghai, p.2118-2120.

[11] Wang, P.J., Yu, J.J., 2007. Design of two-phase sinusoidal power clock and clocked transmission gate adiabatic logic circuit. J. Electron., 24(2):225-231.

[12] Wu, Q., Pedram, M., Wu, X.W., 2000. Clock-gating and its application to low power design of sequential circuits. IEEE Trans. Circuits Syst. I: Fundam. Theory Appl., 47(3):415-420.

[13] Wu, X.W., Hang, G.Q., 2000. Principle of adiabatic computing and CMOS circuits with energy recovery. Chin. J. Comput., 23(7):779-785 (in Chinese).

[14] Zheng, W., Yao, Q.D., Zheng, M., Li, X.D., 2004. Design of low-power and high-speed multiplier. J. Zhejiang Univ. (Eng. Sci.), 38(5):534-538 (in Chinese).