Similar articles

Abstract: Inadequate geometric accuracy of cameras is the main constraint to improving the precision of infrared horizon sensors with a large field of view (FOV). An enormous FOV with a blind area in the center greatly limits the accuracy and feasibility of traditional geometric calibration methods. A novel camera calibration method for infrared horizon sensors is presented and validated in this paper. Three infrared targets are used as control points. The camera is mounted on a rotary table. As the table rotates, these control points will be evenly distributed in the entire FOV. Compared with traditional methods that combine a collimator and a rotary table which cannot effectively cover a large FOV and require harsh experimental equipment, this method is easier to implement at a low cost. A corresponding three-step parameter estimation algorithm is proposed to avoid precisely measuring the positions of the camera and the control points. Experiments are implemented with 10 infrared horizon sensors to verify the effectiveness of the calibration method. The results show that the proposed method is highly stable, and that the calibration accuracy is at least 30% higher than those of existing methods.

适用于大视场红外地球敏感器的相机标定方法

[1]Chen YC, Huang FY, Shi FM, et al., 2019. Plane chessboard-based calibration method for a LWIR ultra-wide-angle camera. Appl Opt, 58(4):744-751.

[2]Deng SC, Meng T, Wang H, et al., 2017. Flexible attitude control design and on-orbit performance of the ZDPS-2 satellite. Acta Astronaut, 130:147-161.

[3]Dias A, Brás C, Martins A, et al., 2013. Thermographic and visible spectrum camera calibration for marine robotic target detection. Proc OCEANS, p.1-5.

[4]Fan QY, He KK, Wang GY, 2020. Star sensor calibration with separation of intrinsic and extrinsic parameters. Opt Expr, 28(14):21318-21335.

[5]Forsyth DA, Ponce J, 2011. Computer Vision: a Modern Approach (2^nd Ed.). Gao YQ, translator, 2017. Publishing House of Electronics Industry, Beijing, China (in Chinese).

[6]Gou B, Cheng YM, 2018. INS/CNS integrated navigation based on corrected infrared Earth measurement. IEEE Trans Instrum Meas, 68(9):3358-3366.

[7]Kannala J, Brandt SS, 2006. A generic camera model and calibration method for conventional, wide-angle, and fish-eye lenses. IEEE Trans Patt Anal Mach Intell, 28(8):1335-1340.

[8]Li XY, Yang L, Su XF, et al., 2019. A correction method for thermal deformation positioning error of geostationary optical payloads. IEEE Trans Geosci Remote Sens, 57(10):7986-7994.

[9]Li YT, Zhang J, Hu WW, et al., 2014. Laboratory calibration of star sensor with installation error using a nonlinear distortion model. Appl Phys B, 115(4):561-570.

[10]Liebe CC, 2002. Accuracy performance of star trackers—a tutorial. IEEE Trans Aerosp Electron Syst, 38(2):587-599.

[11]Mazzini L, 2016. Sensors and actuators technologies. In: Mazzini L (Ed.), Flexible Spacecraft Dynamics, Control and Guidance: Technologies by Giovanni Campolo.Springer International Publishing, Cham.

[12]Modenini D, Locarini A, Zannoni M, 2020. Attitude sensor from ellipsoid observations: a numerical and experimental validation. Sensors, 20(2):433.

[13]Nguyen T, Cahoy K, Marinan A, 2018. Attitude determination for small satellites with infrared Earth horizon sensors. J Spacecr Rockets, 55(6):1466-1475.

[14]Niu S, Bai J, Hou XY, et al., 2007. Design of a panoramic annular lens with a long focal length. Appl Opt, 46(32):7850-7857.

[15]Scaramuzza D, Martinelli A, Siegwart R, 2006. A toolbox for easily calibrating omnidirectional cameras. IEEE/RSJ Int Conf on Intelligent Robots and Systems, p.5695-5701.

[16]Sheng H, Chao HY, Coopmans C, et al., 2010. Low-cost UAV-based thermal infrared remote sensing: platform, calibration and applications. IEEE/ASME Int Conf on Mechatronic and Embedded Systems and Applications, p.38-43.

[17]Shibata T, Tanaka M, Okutomi M, 2017. Accurate joint geometric camera calibration of visible and far-infrared cameras. Electron Imag, 29:art00002.

[18]Stone RC, 1989. A comparison of digital centering algorithms. Astron J, 97:1227-1237.

[19]Sun T, Xing F, You Z, 2013. Optical system error analysis and calibration method of high-accuracy star trackers. Sensors, 13(4):4598-4623.

[20]Usamentiaga R, Garcia DF, Ibarra-Castanedo C, et al., 2017. Highly accurate geometric calibration for infrared cameras using inexpensive calibration targets. Measurement, 112:105-116.

[21]Vidas S, Lakemond R, Denman S, et al., 2012. A mask-based approach for the geometric calibration of thermal-infrared cameras. IEEE Trans Instrum Meas, 61(6):1625-1635.

[22]Wang H, Wang ZY, Wang BD, et al., 2021. Infrared Earth sensor with a large field of view for low-Earth-orbiting micro-satellites. Front Inform Technol Electron Eng, 22(2):262-271.

[23]Wang ZA, Liu BQ, Huang FY, et al., 2020. Corners positioning for binocular ultra-wide angle long-wave infrared camera calibration. Optik, 206:163441.

[24]Wei XG, Zhang GJ, Fan QY, et al., 2014. Star sensor calibration based on integrated modelling with intrinsic and extrinsic parameters. Measurement, 55:117-125.

[25]Ye T, Zhang X, Song P, et al., 2019. A global optimization algorithm for laboratory star sensors calibration problem. Measurement, 134:253-265.

[26]Zhang CF, Niu YX, Zhang H, et al., 2018. Optimized star sensors laboratory calibration method using a regularization neural network. Appl Opt, 57(5):1067-1074.

[27]Zhang H, Niu YX, Lu JZ, et al., 2017. On-orbit calibration for star sensors without priori information. Opt Expr, 25(15):18393-18409.

[28]Zhang S, Huang FY, Liu BQ, et al., 2020a. Optimized calibration method for ultra-field dual bands cameras based on thermal radiation checkerboard. Infrared Phys Technol, 108:103346.

[29]Zhang S, Huang FY, Liu BQ, et al., 2020b. Robust registration for ultra-field infrared and visible binocular images. Opt Expr, 28(15):21766-21782.

[30]Zhang Y, Shen LC, Zhou DL, et al., 2013. Camera calibration of thermal-infrared stereo vision system. Proc 4^th Int Conf on Intelligent Systems Design and Engineering Applications, p.197-201.