Similar articles

Abstract: This paper presents the characteristics of nickel-based alloys, alongside their division into groups, and describes the features that make such materials difficult to grind. The possibilities of exerting a positive influence upon machining conditions, especially through the proper application of grinding fluids, are briefly presented. Both the precise methodologies for, and the results of, the experimental tests carried out on flat surfaces are also detailed. The aim of these tests was to determine the influence of the application of two types of grinding liquid (Ecocut Mikro Plus 82 and Biocut 3000) upon the grinding force values and surface roughness of the machined workpieces made from three nickel alloys (Nickel 201, INCONEL^® alloy 600, and MONEL^® alloy 400). An additional goal of the tests was to determine the influence of grinding wheel structure on the course and results of the machining process. The results indicate that the physical and chemical properties of Biocut 3000 enabled the most advantageous properties of the machined surface roughness, alongside a simultaneous increase in grinding power, when compared to the results when applying Ecocut Mikro Plus 82. The results showed an almost inversely proportional dependence upon the specific tangential grinding force F_t′ and arithmetic mean deviation of the surface profile R_a values, especially in cases of machining Nickel 201 and INCONEL^® alloy 600. The original traverse grinding methodology used in the tests made it possible to assess the changes of the grinding conditions within the conventionally selected zones.

不同类型磨削液微量润滑对镍基合金平面磨削的影响

[1]Aurich, J.C., 2013. Improved coolant supply through slotted grinding wheel. Annals of the CIRP, 62:363-366.

[2]Chen, M., Li, X.T., Sun, F.H., et al., 2001. Studies on the grinding characteristics of directionally solidified nickel-based superalloy. Journal of Materials Processing Technology, 116(2-3):165-169.

[3]Choudhury, I.A., El-Baradie, M.A., 1997. Machining nickel base superalloys: Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212:195-206.

[4]Fuchs Europe Schmierstoffe GmbH, 2013. Fuchs Industrial Lubricants–Innovative Lubricants Require Experienced Application Engineers. http://www.fuchs-europe.com/fileadmin/fuchs_upload/downloads/Englische_Prospekte/2013/Cutting_fluids_for_the_aerospace_sector_5-2013.pdf [Accessed on Jan. 7, 2016].

[5]Huang, Q., Ren, J.X., 1991. Surface integrity and its effects on the fatigue life of the nickel-based superalloy GH33A. International Journal of Fatigue, 13(4):233-326.

[6]Jackson, M.J., Davim, J.P., 2010. Machining with Abrasives. Springer, New York, USA.

[7]JM Precision, 2000. Machining nickel and nickel alloys (including Monel, Kovar, Invar, Inconel & Incoloy). http://www.jmprecision.co.uk/media/machiningnickelalloys.pdf [Accessed on Jan. 7, 2016].

[8]Klocke, F., 2009. Manufacturing Processes 2: Grinding, Honing, Lapping. Springer-Verlag, Berlin, Germany.

[9]Link GmbH, 2003. MicroJet^®–Minimum-Quantity Lubricating Systems: a Solution to Every Application. http://www.mueller-stuttgart.de/pdf/MICROJET%20PROSPEKT%20engl.PDF [Accessed on Jan. 7, 2016].

[10]Liu, Q., Chen, X., Gindy, N., 2006. Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46:284-292.

[11]Maruda, R.W., Legutko, S., Krolczyk, G.M., et al., 2015a. An influence of active additives on the formation of selected indicators of the condition of the X10CrNi18-8 stainless steel surface layer in MQCL conditions. International Journal of Surface Science and Engineering, 9(5):452-465.

[12]Maruda, R.W., Legutko, S., Krolczyk, G.M., et al., 2015b. Influence of cooling conditions on the machining process under MQCL and MQL conditions. Tehnicki Vjesnik– Technical Gazette, 22(4):965-970.

[13]Maruda, R.W., Feldshtein, E., Legutko, S., et al., 2016. Analysis of contact phenomena and heat exchange in the cutting zone under minimum quantity cooling lubrication conditions. Arabian Journal for Science and Engineering, 41(2):661-668.

[14]Molyduval, 2009. Biocut 3000. http://www.molyduval.com/index.php?module=explorer&displayAction=download&downloadFile=datenblaetter_cd/en/tds/biocut%203000.pdf [Accessed on Jan. 7, 2016].

[15]Nadolny, K., Kapłonek, W., Wojtewicz, M., et al., 2013. Effects of sulfurization of grinding wheels on internal cylindrical grinding of Titanium Grade 2^®. Indian Journal of Engineering & Materials Science, 20:108-124.

[16]Nadolny, K., Sienicki, W., Wojtewicz, M., 2015. The effect upon the grinding wheel active surface condition when impregnating with non-metallic elements during internal cylindrical grinding of Titanium. Archives of Civil and Mechanical Engineering, 15(1):71-86.

[17]Neslušan, M., 2009. Grinding of Ni-based alloys with grinding wheels of high porosity. Advances in Production Engineering & Management, 4:29-36.

[18]Neslušan, M., Czán, A., 2001. Machining of Titanium and Nickel Alloys. EDIS, Žilina (in Slovak).

[19]Nickel Development Institute, 2002. Machining Nickel Alloys. Reference Book, Series N° 11 008. http://www.nickelinstitute.org/en/TechnicalLiterature/Reference%20Book%20Series/11008_MachiningNickelAlloys.aspx [Accessed on Jan. 7, 2016].

[20]Oliveira, D.J., Guermandi, L.G., Bianchi, E.C., et al., 2012. Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning. Journal of Materials Processing Technology, 212:2559-2568.

[21]Osterle, W., Li, P.X., 1997. Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates. Materials Science and Engineering: A (Structural Materials: Properties, Microstructure and Processing), 238:357-366.

[22]Pollock, T.M., Tin, S., 2006. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties. Journal of Propulsion and Power, 22(2):361-374.

[23]Schlindwein, H.J., 2008. Individually set cooling lubricants. Maschine, 62(1):18-20 (in German).

[24]Special Metals Corporation, 2005. MONEL^® alloy 400. http://www.specialmetals.com/documents/Monel%20alloy%20400.pdf [Accessed on Jan. 7, 2016].

[25]Special Metals Corporation, 2006. Nickel 200 & 201. http://www.specialmetals.com/documents/Nickel%20200%20&%20201.pdf [Accessed on Jan. 7, 2016].

[26]Special Metals Corporation, 2008. INCONEL^® alloy 600. http://www.specialmetals.com/documents/Inconel%20alloy%20600.pdf [Accessed on Jan. 7, 2016].

[27]Tawakoli, T., Hadad, M.J., Sadeghi, M.M., 2010. Influence of oil mist parameters on minimum quantity lubrication– MQL grinding process. International Journal of Machine Tools and Manufacture, 50(6):521-531.

[28]Ulutan, D., Ozel, T., 2011. Machining induced surface integrity in titanium and nickel alloys: a review. International Journal of Machine Tools & Manufacture, 51:250-280.

[29]Webster, J.A., 1995. Selection of coolant type and application technique in grinding. Supergrind 1995–Grinding and Polishing with Superabrasives, p.205-220.

[30]Webster, J.A., 2008. In grinding, coolant application matters. Manufacturing Engineering, 140(3):171-179.

[31]Wójcik, R., Rosik, R., Świerczyński, J., 2010. Research on aerosols and their impact on reducing the cost of grinding operation. In: Gołąbczak, A., Kruszyński, B. (Eds.), Basics and Technology of Abrasive Machining. Łódź University of Technology, Łódź, Poland, p.549-559 (in Polish).

[32]Xu, X., Yu, Y., Huang, H., 2003. Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys. Wear, 255:1421-1426.

[33]Zhang, S., Li, J.F., Wang, Y.W., 2012. Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. Journal of Cleaner Production, 32:81-87.