Similar articles

Abstract: Carbon nanotube field-effect transistors (CNTFETs) are reliable alternatives for conventional transistors, especially for use in approximate computing (AC) based error-resilient digital circuits. In this paper, CNTFET technology and the gate diffusion input (GDI) technique are merged, and three new AC-based full adders (FAs) are presented with 6, 6, and 8 transistors, separately. The nondominated sorting based genetic algorithm II (NSGA-II) is used to attain the optimal performance of the proposed cells by considering the number of tubes and chirality vectors as its variables. The results confirm the circuits’ improvement by about 50% in terms of power-delay-product (PDP) at the cost of area occupation. The Monte Carlo method (MCM) and 32-nm CNTFET technology are used to evaluate the lithographic variations and the stability of the proposed circuits during the fabrication process, in which the higher stability of the proposed circuits compared to those in the literature is observed. The dynamic threshold (DT) technique in the transistors of the proposed circuits amends the possible voltage drop at the outputs. Circuitry performance and error metrics of the proposed circuits nominate them for the least significant bit (LSB) parts of more complex arithmetic circuits such as multipliers.

基于特定最低有效位动态阈值碳纳米管场效应晶体管的高效优化近似栅极扩散输入全加器

[1]Abdul Hadi MF, Hussin H, Soin N, 2022. The impact of variation in diameter and dielectric materials of the CNT field-effect transistor. ECS J Sol State Sci Technol, 11(2):023002.

[2]Abiri E, Darabi A, Salehi MR, et al., 2020. Optimized gate diffusion input method-based reversible magnitude arithmetic unit using non-dominated sorting genetic algorithm II. Circ Syst Signal Process, 39(9):4516-4551.

[3]Ben-Jamaa MH, Mohanram K, de Micheli G, 2011. An efficient gate library for ambipolar CNTFET logic. IEEE Trans Comput-Aided Des Integr Circ Syst, 30(2):242-255.

[4]Cardenas JA, Lu SH, Williams NX, et al., 2021. In-place printing of flexible electrolyte-gated carbon nanotube transistors with enhanced stability. IEEE Electron Dev Lett, 42(3):367-370.

[5]Cho G, Lombardi F, 2016. Design and process variation analysis of CNTFET-based ternary memory cells. Integration, 54:97-108.

[6]Deb K, Pratap A, Agarwal S, et al., 2002. A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput, 6(2):182-197.

[7]Deng J, Wong HSP, 2007a. A compact SPICE model for carbon-nanotube field-effect transistors including nonidealities and its application—Part I: model of the intrinsic channel region. IEEE Trans Electron Dev, 54(12):‍3186-3194.

[8]Deng J, Wong HSP, 2007b. A compact SPICE model for carbon-nanotube field-effect transistors including nonidealities and its application—Part II: full device model and circuit performance benchmarking. IEEE Trans Electron Dev, 54(12):3195-3205.

[9]Ghasemian A, Abiri E, Hassanli K, et al., 2022. HF-QSRAM: half-select free quaternary SRAM design with required peripheral circuits for IoT/IoVT applications. ECS J Sol State Sci Technol, 11(1):011002.

[10]Ghorbani A, Dolatshahi M, Zanjani SM, et al., 2022. A new low-power dynamic-GDI full adder in CNFET technology. Integration, 83:46-59.

[11]Gupta V, Mohapatra D, Raghunathan A, et al., 2013. Low-power digital signal processing using approximate adders. IEEE Trans Comput-Aided Des Integr Circ Syst, 32(1):124-137.

[12]Hasan M, Zaman HU, Hossain M, et al., 2020. Gate diffusion input technique based full swing and scalable 1-bit hybrid full adder for high performance applications. Eng Sci Technol Int J, 23(6):1364-1373.

[13]Homulle H, Song L, Charbon E, et al., 2018. The cryogenic temperature behavior of bipolar, MOS, and DTMOS transistors in standard CMOS. IEEE J Electron Dev Soc, 6:263-270.

[14]Huang JL, Zhu MH, Gupta P, et al., 2010. A CAD tool for design and analysis of CNFET circuits. Proc IEEE Int Conf of Electron Devices and Solid-State Circuits, p.1-4.

[15]Huang JL, Zhu MH, Yang SQ, et al., 2012. A physical design tool for carbon nanotube field-effect transistor circuits. ACM J Emerg Technol Comput Syst, 8(3):25.

[16]Huang JQ, Kumar TN, Almurib HAF, et al., 2021. Commutative approximate adders: analysis and evaluation. Proc IEEE/ACM Int Symp on Nanoscale Architectures, p.1-6.

[17]Kandpal J, Tomar A, Agarwal M, et al., 2020. High-speed hybrid-logic full adder using high-performance 10-T XOR–XNOR cell. IEEE Trans Very Large Scale Integr Syst, 28(6):1413-1422.

[18]Karimi A, Rezai A, 2016. Improved device performance in CNTFET using genetic algorithm. ECS J Sol State Sci Technol, 6(1):M9-M12.

[19]Karimi A, Rezai A, 2017. A design methodology to optimize the device performance in CNTFET. ECS J Sol State Sci Technol, 6(8):M97-M102.

[20]Kordrostami Z, Raeini AGN, Ghoddus H, 2019. Design and optimization of lightly doped CNTFET architectures based on NEGF method and PSO algorithm. ECS J Sol State Sci Technol, 8(4):M39-M44.

[21]Lee C, Wong HSP, 2015. Stanford Virtual-Source Carbon Nanotube Field-Effect Transistors Model 1.0.1. NanoHUB. https://nanohub.org/publications/42/2 [Accessed on Mar. 1, 2022].

[22]Lindert N, Sugii T, Tang S, et al., 1999. Dynamic threshold pass-transistor logic for improved delay at lower power supply voltages. IEEE J Sol-State Circ, 34(1):85-89.

[23]Mahdiani HR, Ahmadi A, Fakhraie SM, et al., 2010. Bio-inspired imprecise computational blocks for efficient VLSI implementation of soft-computing applications. IEEE Trans Circ Syst I Regul Papers, 57(4):850-862.

[24]Majerus S, Merrill W, Garverick SL, 2013. Design and long-term operation of high-temperature, bulk-CMOS integrated circuits for instrumentation and control. Proc IEEE Energytech, p.1-6.

[25]Mirzaei M, Mohammadi S, 2020. Process variation-aware approximate full adders for imprecision-tolerant applications. Comput Electr Eng, 87:106761.

[26]Mirzaei M, Mohammadi S, 2021. Low-power and variation-aware approximate arithmetic units for image processing applications. AEU Int J Electron Commun, 138:153825.

[27]Morgenshtein A, Fish A, Wagner I, 2002. Gate-diffusion input (GDI): a power-efficient method for digital combinatorial circuits. IEEE Trans Very Large Scale Integr Syst, 10(5):566-581.

[28]Morgenshtein A, Yuzhaninov V, Kovshilovsky A, et al., 2014. Full-swing gate diffusion input logic—case-study of low-power CLA adder design. Integration, 47(1):62-70.

[29]Naseri H, Timarchi S, 2018. Low-power and fast full adder by exploring new XOR and XNOR gates. IEEE Trans Very Large Scale Integr Syst, 26(8):1481-1493.

[30]Rafiee M, Sadeghi Y, Shiri N, et al., 2021a. An approximate CNTFET 4:‍2 compressor based on gate diffusion input and dynamic threshold. Electron Lett, 57(17):650-652.

[31]Rafiee M, Pesaran F, Sadeghi A, et al., 2021b. An efficient multiplier by pass transistor logic partial product and a modified hybrid full adder for image processing applications. Microelectron J, 118:105287.

[32]Rafiee M, Shiri N, Sadeghi A, 2022a. High-performance 1-bit full adder with excellent driving capability for multistage structures. IEEE Embed Syst Lett, 14(1):47-50.

[33]Sabetzadeh F, Moaiyeri MH, Ahmadinejad M, 2019. A majority-based imprecise multiplier for ultra-efficient approximate image multiplication. IEEE Trans Circ Syst I Regul Papers, 66(11):4200-4208.

[34]Sadeghi A, Shiri N, Rafiee M, 2020. High-efficient, ultra-low-power and high-speed 4:2 compressor with a new full adder cell for bioelectronics applications. Circ Syst Signal Process, 39(12):6247-6275.

[35]Sadeghi A, Shiri N, Rafiee M, et al., 2022. An efficient counter-based Wallace-tree multiplier with a hybrid full adder core for image blending. Front Inform Technol Electron Eng, 23(6):950-965.

[36]Strollo AGM, Napoli E, de Caro D, et al., 2020. Comparison and extension of approximate 4-2 compressors for low-power approximate multipliers. IEEE Trans Circ Syst I Regul Papers, 67(9):3021-3034.

[37]Vasantha Kumar BVP, Murthy Sharma NS, Lal Kishore K, 2012. A technique to reduce glitch power during physical design stage for low power and less IR drop. Int J Comput Appl, 39(18):62-67.

[38]Venkatachalam S, Ko SB, 2017. Design of power and area efficient approximate multipliers. IEEE Trans Very Large Scale Integr Syst, 25(5):1782-1786.

[39]Waris H, Wang CH, Liu WQ, 2019. High-performance approximate half and full adder cells using NAND logic gate. IEICE Electron Expr, 16(6):20190043.

[40]Waris H, Wang CH, Liu WQ, et al., 2022. Hybrid partial product-based high-performance approximate recursive multipliers. IEEE Trans Emerg Top Comput, 10(1):507-513.

[41]Yang ZX, Han J, Lombardi F, 2015. Transmission gate-based approximate adders for inexact computing. Proc IEEE/ACM Int Symp on Nanoscale Architectures, p.145-150.