References
[1] Berry, P.L., Poskitt, T.J., 1972. The consolidation of peat.
Gotechnique, 22(1):27-52.
[2] Chen, Y.M., Tang, X.W., Jia, N., 2007. Consolidation of sensitive clay with vertical drain.
International Journal for Numerical and Analytical Methods in Geomechanics, 31(15):1695-1713.
[3] Casagrande, A., 1936. The Determination of the Pre-consolidation Load and Its Practical Significance.
, Proceedings of 1st International Conference Soil Mechanics and Foundation Engineering, 60-64. :60-64.
[4] Chinese Industry Standard, 1999.
SL237-1999, Specification of Soil Test, The Ministry of Water Resources of the Peoples Republic of China,:
[5] Clayton, C.R., Simons, N.E., Matthews, M.C., 1982. Site Investigation. Blackwell Science,Oxford :
[6] Duan, Y.Y., Zhang, Y.P., Chan, D., Yu, Y.N., 2012. Theoretical elastoplastic analysis for foundations with geosyntheticencased columns.
Journal of Zhejiang Universit-SCIENCE A (Applied Physics & Engineering), 13(7):506-518.
[7] Feng, T.W., 2010. Some observations on the oedometric consolidation strain rate behaviors of saturated clay.
Journal of Geoengineering, 5(1):1-7.
[8] Huang, M.S., Liu, Y.H., 2011. Simulation of yield characteristics and principal stress rotation effects of natural soft clay.
Chinese Journal of Geotechnical Engineering, (in Chinese),33(11):1167-1175.
[9] Karstunen, M., Yin, Z.Y., 2010. Modelling time-dependent behaviour of Murro test embankment.
Gotechnique, 60(10):735-749.
[10] Lade, P.V., Kirkgard, M.M., 2000. Effects of stress rotation and changes of
b-values on cross-anisotropic behaviour of natural,
K
0-consolidated soft clay.
Soils and Foundations, 40(6):93-105.
[11] Leoni, M., Karstunen, M., Vermeer, P.A., 2008. Anisotropic creep model for soft soils.
Gotechnique, 58(3):215-226.
[12] Li, J.Z., Peng, F.L., Xu, L.S., 2009. One-dimensional viscous behavior of clay and its constitutive modeling.
International Journal of Geomechanics, 9(2):43-51.
[13] Li, Q., Ng, C.W.W., Liu, G.B., 2012. Low secondary compressibility and shear strength of Shanghai Clay.
Journal of Central South University, 19(8):2323-2332.
[14] Li, Y.Q., Zhou, J., Xie, K.H., 2008. Environmental effects induced by excavation.
Journal of Zhejiang Universit-SCIENCE A, 9(1):50-57.
[15] Mesri, G., Godlewski, P.M., 1977. Time and stress-compressibility interrelationship.
Journal of the Geotechnical Engineering Division, 103(5):417-430.
[16] Mesri, G., Castro, A., 1987.
C
α/
C
c concept and
K
0 during secondary compression.
Journal of Geotechnical Engineering, 113(3):230-247.
[17] Miao, L., Zhang, J., Wang, F., Houston, S.L., 2008. Time-dependent deformation behavior of Jiangsu marine clay.
Marine Georesources & Geotechnology, 26(2):86-100.
[18] OKelly, B.C., 2006. Compression and consolidation anisotropy of some soft soils.
Geotechnical and Geological Engineering, 24(6):1715-1728.
[19] Shen, Y., Zhou, J., Gong, X.N., 2008. Study on Strength Criterion of Intact Soft Clay after Monotonic Principal Stress Rotation. Geotechnical Engineering for Disaster Mitigation and Rehabilitation. Springer Berlin Heidelberg,Berlin :892-898.
[20] Suneel, M., Park, L.K., Im, J.C., 2008. Compressibility characteristics of Korean marine clay.
Marine Georesources & Geotechnology, 26(2):111-127.
[21] Wang, L.Z., Yin, Z.Y., 2012. Stress-dilatancy of natural soft clay under undrained creep condition.
International Journal of Geomechanics, in press,:
[22] Wang, L.Z., Shen, K.L., Ye, S.H., 2008. Undrained shear strength of
K
0 consolidated soft soils.
International Journal of Geomechanics, 8(2):105-113.
[23] Wang, L.Z., Wang, Z., Li, L.L., Wang, J.C., 2011. Construction behavior simulation of a hydraulic tunnel during standpipe lifting.
Tunnelling and Underground Space Technology, 26(6):674-685.
[24] Wang, L.Z., Dan, H.B., Li, L.L., 2012. Modeling strain-rate dependent behavior of
KR
0-consolidated soft clays.
Journal of Engineering Mechanics, 138(7):738-748.
[25] Yin, Z.Y., Hicher, P.Y., 2008. Identifying parameters controlling soil delayed behaviour from laboratory and
in situ pressuremeter testing.
International Journal for Numerical and Analytical Methods in Geomechanics, 32(12):1515-1535.
[26] Yin, Z.Y., Chang, C.S., 2009. Microstructural modelling of stress-dependent behaviour of clay.
International Journal of Solids and Structures, 46(6):1373-1388.
[27] Yin, Z.Y., Chang, C.S., 2009. Non-uniqueness of critical state line in compression and extension conditions.
International Journal for Numerical and Analytical Methods in Geomechanics, 33(10):1315-1338.
[28] Yin, Z.Y., Chang, C.S., Hicher, P.Y., Karstunen, M., 2009. Micromechanical analysis of kinematic hardening in natural clay.
International Journal of Plasticity, 25(8):1413-1435.
[29] Yin, Z.Y., Chang, C.S., Karstunen, M., Hicher, P.Y., 2010. An anisotropic elastic-viscoplastic model for soft clays.
International Journal of Solids and Structures, 47(5):665-677.
[30] Yin, Z.Y., Hattab, M., Hicher, P.Y., 2011. Multiscale modeling of a sensitive marine clay.
International Journal for Numerical and Analytical Methods in Geomechanics, 35(15):1682-1702.
[31] Yin, Z.Y., Xu, Q., Yu, C., 2013. Elastic viscoplastic modeling for natural soft clays considering nonlinear creep.
International Journal of Geomechanics, in press,:
[32] Zeng, L.L., Hong, Z.S., Cai, Y.Q., Han, J., 2011. Change of hydraulic conductivity during compression of undisturbed and remolded clays.
Applied Clay Science, 51(1-2):86-93.
[33] Zhang, Z.M., 2011. Achievements and problems of geotechnical engineering investigation in China.
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 12(2):87-102.
Open peer comments: Debate/Discuss/Question/Opinion
<1>