JZUS - Journal of Zhejiang University SCIENCE

Journal of Zhejiang University SCIENCE A 2015 Vol.16 No.5 P.335-340

Key research on computer aided tolerancing

Author(s): Yan-long Cao, Luc Mathieu, Jane Jiang
Affiliation(s): The State Key Laboratory of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China; more
Corresponding email(s): sdcaoyl@zju.edu.cn
Key Words: Computer aided tolerancing (CAT), Tolerance specification and standard, Tolerance design, Detection and measurement

Share this article to： More \|Next Article >>>

Abstract: The CIRP (International Academy for Production Engineering) Conference on computer aided tolerancing (CAT) is initiated and supported scientifically every two years by two CIRP Scientific Technical Committees (STCs): Design (STC Dn) and Precision Metrology (STC P) to address the emerging problems of CAT, which has a prominent role at the interface between product design and manufacturing. The 13th CIRP CAT Conference held at Zhejiang University, Hangzhou, China during May 11–14, 2014 was the successor to the twelve earlier conferences. We are pleased to publish in this special part issue a selection of six papers that were presented at the conference in Hangzhou. These papers cover a wide spectrum of current international research in CAT.

计算机辅助公差设计中的关键问题研究

概要：作为机械产品设计和制造过程中的一项重要内容，计算机辅助公差设计（CAT）是CAD/CAPP/CAM集成的关键技术，是国内外先进制造技术发展中亟需解决的问题。计算机辅助公差设计覆盖面非常广泛，涵盖公差规范和标准化、设计/制造工艺/产品生命周期管理中的公差设计、检测与测量以及功能公差设计。本文首先简要分析这些热点问题的研究进展情况，其次介绍本专辑收集的第13届国际生产工程科学院计算机辅助公差设计会议中的最新研究成果，分析该领域的最新研究进展，希望能帮助读者了解相关研究工作并促进研究人员开展讨论，进一步实现计算机辅助公差设计中的关键技术的突破，促进CAD/CAPP/CAM的集成。

关键词：计算机辅助公差设计；公差规范与标准；公差设计；检测与测量；功能公差设计

Reference

[1]Anwer, N., Ballu, A., Mathieu, L., 2013. The skin model, a comprehensive geometric model for engineering design. CIRP Annals-Manufacturing Technology, 62(1):143-146.

[2]Anwer, N., Schleich, B., Mathieu, L., et al., 2014. From solid modelling to skin model shapes: Shifting paradigms in computer-aided tolerancing. CIRP Annals- Manufacturing Technology.

[3]Ballu, A., Mathieu, L., 1996. Univocal expression of functional and geometrical tolerances for design, manufacturing and inspection. Computer-aided Tolerancing, Springer, p.31-46.

[4]Bender, A., 1968. Statistical Tolerancing as it Relates to Quality Control and the Designer (6 times 2.5=9). SAE Technical Paper.

[5]Bruyère, J., Dantan, J.Y., Bigot, R., et al., 2007. Statistical tolerance analysis of bevel gear by tooth contact analysis and Monte Carlo simulation. Mechanism and Machine Theory, 42(10):1326-1351.

[6]Cao, Y.L., Zhang, H., Li, B., et al., 2013. Study on functional specification scheme on interface based on positioning features. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5):745-753.

[7]Clément, A., Desrochers, A., Rivière, A., 1991. Theory and practice of 3-D tolerancing for assembly. CIRP International Working Seminar on Computer-Aided Tolerancing, Penn State University, p.25-55.

[8]D’Errico, J.R., Zaino, N.A., 1988. Statistical tolerancing using a modification of Taguchi’s method. Technometrics, 30(4):397-405.

[9]Dantan, J.Y., Qureshi, A.J., 2009. Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation. Computer-Aided Design, 41(1):1-12.

[10]Dantan, J.Y., Gayton, N., Qureshi, A.J., et al., 2013. Tolerance analysis approach based on the classification of uncertainty (aleatory/epistemic). Procedia CIRP, 10:287- 293.

[11]Davidson, J., Mujezinovic, A., Shah, J., 2002. A new mathematical model for geometric tolerances as applied to round faces. Journal of Mechanical Design, 124(4):609-622.

[12]Desrochers, A., Ghie, W., Laperriere, L., 2003. Application of a unified Jacobian-Torsor model for tolerance analysis. Journal of Computing and Information Science in Engineering, 3(1):2-14.

[13]Etienne, A., Dantan, J.Y., Qureshi, J., et al., 2008. Variation management by functional tolerance allocation and manufacturing process selection. International Journal on Interactive Design and Manufacturing (IJIDeM), 2(4):207-218.

[14]Evans, D.H., 1971. An application of numerical integration techniques to statistical tolerancing, II—A note on the error. Technometrics, 13(2):315-324.

[15]Evans, D.H., 1972. An application of numerical integration techniques to statistical tolerancing, III-general distributions. Technometrics, 14(1):23-35.

[16]Evans, D.H., 1975a. Statistical tolerancing-The state of the art. III-Shifts and drifts. Journal of Quality Technology, 7:72-76.

[17]Evans, D.H., 1975b. Statistical tolerancing: The state of the art. II-Methods for estimating moments. Journal of Quality Technology, 7:1-12.

[18]Gao, J., Chase, K.W., Magleby, S.P., 1998. Generalized 3-D tolerance analysis of mechanical assemblies with small kinematic adjustments. IIE Transactions, 30(4):367-377.

[19]Ghie, W., Laperrière, L., Desrochers, A., 2010. Statistical tolerance analysis using the unified Jacobian–Torsor model. International Journal of Production Research, 48(15):4609-4630.

[20]Giordano, M., Samper, S., Petit, J.P., 2007. Tolerance analysis and synthesis by means of deviation domains, axi-symmetric cases. Models for Computer Aided Tolerancing in Design and Manufacturing, Springer, p.85-94.

[21]Hunter, R., Guzman, M., Möller, J., et al., 2008. A functional tolerance model: an approach to automate the inspection process. Journal of Achievements in Materials and Manufacturing Engineering, 31(2):662-670.

[22]Islam, M., 2004. Functional dimensioning and tolerancing software for concurrent engineering applications. Computers in Industry, 54(2):169-190.

[23]ISO (International Organization for Standardization), 2005. Geometrical Product Specifications (GPS)–General Concepts–Part 1: Model for Geometrical Specification and Verification, ISO 17450-1:2005. ISO.

[24]ISO (International Organization for Standardization), 2010. Geometrical Product Specifications (GPS)–Dimensional Tolerancing–Part 1: Linear Sizes, ISO 14405-1:2010. ISO, Geneva.

[25]Jiang, K., Davidson, J.K., Liu, J., et al., 2014. Using tolerance maps to validate machining tolerances for transfer of cylindrical datum in manufacturing process. The International Journal of Advanced Manufacturing Technology, 73(1-4):465-478.

[26]Krämer, P., Weckenmann, A., 2010. Multi-energy image stack fusion in computed tomography. Measurement Science and Technology, 21(4):045105.

[27]Lee, W.J., Woo, T., 1990. Tolerances: their analysis and synthesis. Journal of Engineering for Industry, 112(2):113-121.

[28]Mansuy, M., Giordano, M., Hernandez, P., 2011. A new calculation method for the worst case tolerance analysis and synthesis in stack-type assemblies. Computer-Aided Design, 43(9):1118-1125.

[29]Mcadams, D., 2003. Identification and codification of principles for functional tolerance design. Journal of Engineering Design, 14(3):355-375.

[30]Moroni, G., Petrò, S., 2014. Optimal inspection strategy planning for geometric tolerance verification. Precision Engineering, 38(1):71-81.

[31]Morse, E.P., Srinivasan, V., Voelcker, H.B., 2012. Size tolerancing revisited: a basic notion and its evolution in standards. 12th CIRP Conference on Computer Aided Tolerancing, Huddesfield, UK.

[32]Nigam, S.D., Turner, J.U., 1995. Review of statistical approaches to tolerance analysis. Computer-Aided Design, 27(1):6-15.

[33]Parkinson, D., 1982. The application of reliability methods to tolerancing. Journal of Mechanical Design, 104(3):612- 618.

[34]Qureshi, A.J., Dantan, J.Y., Sabri, V., et al., 2012. A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation. Computer-Aided Design, 44(2):132-142.

[35]Savio, E., Hansen, H.N., de Chiffre, L., 2002. Approaches to the calibration of freeform artefacts on coordinate measuring machines. CIRP Annals-Manufacturing Technology, 51(1):433-436.

[36]Sprauel, J., Linares, J., Bachmann, J., et al., 2003. Uncertainties in CMM measurements, control of ISO specifications. CIRP Annals-Manufacturing Technology, 52(1):423-426.

[37]Taguchi, G., 1978. Performance analysis design. The International Journal of Production Research, 16(6):521-530.

[38]Walter, M., Sprügel, T., Wartzack, S., 2013. Tolerance analysis of systems in motion taking into account interactions between deviations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405412473719.

[39]Wu, F., Dantan, J.Y., Etienne, A., et al., 2009. Improved algorithm for tolerance allocation based on Monte Carlo simulation and discrete optimization. Computers & Industrial Engineering, 56(4):1402-1413.

[40]Yang, J.X., Xu, X.S., Cao, Y.L., et al., 2010. Functional tolerance specification design based on assembly positioning. Journal of Mechanical Engineering, 46(2):1-8 (in Chinese).

[41]Yang, J.X., Wang, J.Y., Wu, Z.Q., et al., 2013. Statistical tolerancing based on variation of point-set. Procedia CIRP, 10:9-16.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Similar articles

- Go to

计算机辅助公差设计中的关键问题研究

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference