Full Text:   <3561>

CLC number: TP14

On-line Access: 

Received: 2004-10-10

Revision Accepted: 2005-06-23

Crosschecked: 0000-00-00

Cited: 4

Clicked: 5746

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2005 Vol.6 No.10 P.1152-1157


Research on surface characteristics of non-traditional finishing

Author(s):  LI Bang-zhong, ZHOU Jin-jin

Affiliation(s):  College of Mechanical Engineering, Dalian University of Technology, Dalian 116023, China; more

Corresponding email(s):   dlcadcam@163.com, zhoujj@dlut.edu.cn

Key Words:  Non-traditional finishing, Surface characteristics, Machining texture, Microtopography

LI Bang-zhong, ZHOU Jin-jin. Research on surface characteristics of non-traditional finishing[J]. Journal of Zhejiang University Science A, 2005, 6(10): 1152-1157.

@article{title="Research on surface characteristics of non-traditional finishing",
author="LI Bang-zhong, ZHOU Jin-jin",
journal="Journal of Zhejiang University Science A",
publisher="Zhejiang University Press & Springer",

%0 Journal Article
%T Research on surface characteristics of non-traditional finishing
%A LI Bang-zhong
%A ZHOU Jin-jin
%J Journal of Zhejiang University SCIENCE A
%V 6
%N 10
%P 1152-1157
%@ 1673-565X
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.A1152

T1 - Research on surface characteristics of non-traditional finishing
A1 - LI Bang-zhong
A1 - ZHOU Jin-jin
J0 - Journal of Zhejiang University Science A
VL - 6
IS - 10
SP - 1152
EP - 1157
%@ 1673-565X
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.A1152

This paper reports results of investigations of some surface characteristics, and resulting performance of parts processed using non-traditional finishing methods. The friction factor, precision keeping and anti-conglutination performance of the finished surfaces are considered, and surface characteristics such as microtopography and machining texture were investigated. The overall performance of surfaces finished using non-traditional finishing methods was found to be significantly better than that of traditional finishing methods.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article


[1] Klocke, F., Sparrer, M., 1998. Electrochemical finishing. Journal of Manufacturing Science, 1(4):247-256.

[2] Krishnaiah, O.V., Chetty, R.V., Murthy, G.K., Radhakrishnan, V., 1981. On some aspects of surface formation in ECM. Journal of Engineering for Industry, 103:341-348.

[3] Konig, W., 1978. Surface generation in electrochemical machining. Annals of the CIRP, 27:97.

[4] Li, B.Z., Zhou, J.J., 2004. Research on electrolyte for mechanical mirror finishing of stainless steel. China Mechanical Engineering, 15(11):954-958 (in Chinese).

[5] Rajurkar, K.P., Zhu, D., McGeough, J.A., Kozak, J., Desila, A., 1999. New development in electrochemical machining. Annals of the CIRP, 48(2):567-579.

[6] Wang, X.M., 2002. The Mechanism and Surface Characteristic of Pulse Electrochemical and its Compounded Finish Machining. Ph.D Thesis. Dalian University of Technology, p.71-72 (in Chinese).

[7] Yang, S.C. (Ed.), 2000. Surface Quality and Finishing Machining. China Machine Press, Beijing, p.44-45 (in Chinese).

[8] Zhang, M., Yi, J.J., 1999. Surface appearances of modified gear by ECM and its friction property. Journal of Dalian University of Technology, 39(3):425-428 (in Chinese).

Open peer comments: Debate/Discuss/Question/Opinion


Please provide your name, email address and a comment

Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE