Similar articles

Abstract: Mercury emission has become a great environmental concern because of its high toxicity, bioaccumulation, and persistence. Adsorption is an effective method to remove Hg⁰ from coal-fired flue gas, with adsorbents playing a dominant role. Extensive investigations have been conducted on the use of cuO-based materials for Hg⁰ removal, and some fruitful results have been obtained. In this review, we summarize advances in the application of cuO-based materials for Hg⁰ capture. Firstly, the fundamentals of CuO, including its crystal information and synthesis methods, are introduced. Then, the Hg⁰ removal capability of some typical CuO-based adsorbents is discussed. Considering that coal-fired flue gas also contains a certain amount of NO, SO₂, H₂O, NH₃, and HCl, the impacts of these species on adsorbent Hg⁰ removal efficiency are summarized next. By generalizing the mechanisms dominating the Hg⁰ removal process, the rate-determining step and the key intermediates can be discovered. Apart from Hg⁰, some other air pollutants, such as CO, NO_x, and volatile organic compounds (VOCs), account for a certain portion of flue gas. In view of their similar abatement mechanisms, simultaneous removal of Hg⁰ and other air pollutants has become a hot topic in the environmental field. Considering the Hg⁰ re-emission phenomena in wet flue gas desulfurization (WFGD), mercury capture performance under different conditions in this device is discussed. Finally, we conclude that new adsorbents suitable for long-term operation in coal-fired flue gas should be developed to realize the effective reduction of mercury emissions.

氧化铜基脱汞剂的进展研究

[1]AbboudiM, MessaliM, KadiriN, et al., 2011. Synthesis of CuO, La₂O₃, and La₂CuO₄ by the thermal-decomposition of oxalates precursors using a new method. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 41(6):683-688.

[2]BalamuruganB, MehtaBR, ShivaprasadSM, 2001. Surface-modified CuO layer in size-stabilized single-phase Cu₂O nanoparticles. Applied Physics Letters, 79(19):3176-3178.

[3]BalasundaramK, SharmaM, 2018. Concurrent removal of elemental mercury and SO₂ from flue gas using a thiol-impregnated CaCO₃-based adsorbent: a full factorial design study. Environmental Science and Pollution Research, 25(16):15518-15528.

[4]BessingerBA, VlassopoulosD, SerranoS, et al., 2012. Reactive transport modeling of subaqueous sediment caps and implications for the long-term fate of arsenic, mercury, and methylmercury. Aquatic Geochemistry, 18(4):297-326.

[5]BlytheGM, RichardsonMK, DeneCE, et al., 2010. Field study of mercury partitioning and re-emissions in wet FGD systems. Proceedings of the 8th Power Plant Air Pollutant Control Mega Symposium.

[6]BogackiJ, MarcinowskiP, MajewskiM, et al., 2018. Alternative approach to current EU BAT recommendation for coal-fired power plant flue gas desulfurization wastewater treatment. Processes, 6(11):229.

[7]BourneLC, YuPY, ZettlA, et al., 1989. High-pressure electrical conductivity measurements in the copper oxides. Physical Review B, 40(16):10973-10976.

[8]ChakrabortyS, DasA, BegumMR, et al., 2011. Vibrational properties of CuO nanoparticles synthesized by hydrothermal technique. AIP Conference Proceedings, 1349(1):841-842.

[9]ChangL, ZhaoYC, LiHL, et al., 2017. Effect of sulfite on divalent mercury reduction and re-emission in a simulated desulfurization aqueous solution. Fuel Processing Technology, 165:138-144.

[10]ChenDY, ZhaoSJ, QuZ, et al., 2018. Cu-BTC as a novel material for elemental mercury removal from sintering gas. Fuel, 217:297-305.

[11]ChoiY, KimJ, MoonI, 2020. Simulation and economic assessment of using H₂O₂ solution in wet scrubber for large marine vessels. Energy, 194:116907.

[12]DevarajanD, LianP, BrooksSC, et al., 2018. Quantum chemical approach for calculating stability constants of mercury complexes. ACS Earth and Space Chemistry, 2(11):1168-1178.

[13]DuW, YinLB, ZhuoYQ, et al., 2015. Performance of CuO_x‒neutral Al₂O₃ sorbents on mercury removal from simulated coal combustion flue gas. Fuel Processing Technology, 131:403-408.

[14]FanXP, LiCT, ZengGM, et al., 2012. The effects of Cu/HZSM-5 on combined removal of Hg⁰ and NO from flue gas. Fuel Processing Technology, 104:325-331.

[15]FangYR, GuoYB, 2018. Copper-based non-precious metal heterogeneous catalysts for environmental remediation. Chinese Journal of Catalysis, 39(4):566-582.

[16]GallowayB, RoykoM, SasmazE, et al., 2018. Mercury oxidation over Cu-SSZ-13 catalysts under flue gas conditions. Chemical Engineering Journal, 336:253-262.

[17]GaoFY, YanH, TangXL, et al., 2021. Simultaneous removal of gaseous CO and elemental mercury over Cu-Co modified activated coke at low temperature. Journal of Environmental Sciences, 101:36-48.

[18]GingerichDB, GrolE, MauterMS, 2018. Fundamental challenges and engineering opportunities in flue gas desulfurization wastewater treatment at coal fired power plants. Environmental Science: Water Research & Technology, 4(7):909-925.

[19]HeP, ZhangZZ, PengXL, et al., 2018. Mercury capture by manganese modified copper oxide. Journal of the Taiwan Institute of Chemical Engineers, 85:201-206.

[20]HsuCJ, ChiouHJ, ChenYH, et al., 2019. Mercury adsorption and re-emission inhibition from actual WFGD wastewater using sulfur-containing activated carbon. Environmental Research, 168:319-328.

[21]HsuCJ, AtkinsonJD, ChungA, et al., 2021. Gaseous mercury re-emission from wet flue gas desulfurization wastewater aeration basins: a review. Journal of Hazardous Materials, 420:126546.

[22]JampaiahD, ChalkidisA, SabriYM, et al., 2019. Role of ceria in the design of composite materials for elemental mercury removal. The Chemical Record, 19(7):‍1407-1419.

[23]JiaL, FanBG, YaoYX, et al., 2018. Study on the elemental mercury adsorption characteristics and mechanism of iron-based modified biochar materials. Energy & Fuels, 32(12):12554-12566.

[24]JiangXC, HerricksT, XiaYN, 2002. CuO nanowires can be synthesized by heating copper substrates in air. Nano Letters, 2(12):1333-1338.

[25]LeeJ, ChoH, MoonI, et al., 2021. Techno-economic assessment of carbonate melt flue gas desulfurization process. Computers & Chemical Engineering, 146:107227.

[26]LeeJ, AhnY, ChoH, et al., 2022. Economic performance assessment of elemental sulfur recovery with carbonate melt desulfurization process. Process Safety and Environmental Protection, 158:123-133.

[27]LiHL, WuSK, WuCY, et al., 2015. SCR atmosphere induced reduction of oxidized mercury over CuO–CeO₂/TiO₂ catalyst. Environmental Science & Technology, 49(12):7373-7379.

[28]LiHL, ZhuL, WuSK, et al., 2017. Synergy of CuO and CeO₂ combination for mercury oxidation under low-temperature selective catalytic reduction atmosphere. International Journal of Coal Geology, 170:69-76.

[29]LiJY, WuQR, WangYY, et al., 2021. Improvement of NH₃ resistance over CuO/TiO₂ catalysts for elemental mercury oxidation in a wide temperature range. Catalysis Today, 376:276-284.

[30]LiY, YangXY, RookeJ, et al., 2010. Ultralong Cu(OH)₂ and CuO nanowire bundles: PEG200-directed crystal growth for enhanced photocatalytic performance. Journal of Colloid and Interface Science, 348(2):303-312.

[31]LimJ, ChoiY, KimG, et al., 2020. Modeling of the wet flue gas desulfurization system to utilize low-grade limestone. Korean Journal of Chemical Engineering, 37(12):2085-2093.

[32]LimJ, ChoH, KimJ, 2021. Optimization of wet flue gas desulfurization system using recycled waste oyster shell as high-grade limestone substitutes. Journal of Cleaner Production, 318:128492.

[33]LimJ, JeongS, KimJ, 2022. Deep neural network-based optimal selection and blending ratio of waste seashells as an alternative to high-grade limestone depletion for SO_x capture and utilization. Chemical Engineering Journal, 431:133244.

[34]LiuDJ, ZhouWG, WuJ, 2017. Effect of Ce and La on the activity of CuO/ZSM-5 and MnO_x/ZSM-5 composites for elemental mercury removal at low temperature. Fuel, 194:115-122.

[35]LiuDJ, LuC, WuJ, 2018a. CuO/g-C₃N₄ nanocomposite for elemental mercury capture at low temperature. Journal of Nanoparticle Research, 20(10):277.

[36]LiuDJ, LuC, WuJ, 2018b. Gaseous mercury capture by copper-activated nanoporous carbon nitride. Energy & Fuels, 32(8):8287-8295.

[37]LiuDJ, LiCE, WuJ, et al., 2020. Novel carbon-based sorbents for elemental mercury removal from gas streams: a review. Chemical Engineering Journal, 391:123514.

[38]LiuH, ChangL, LiuWJ, et al., 2020. Advances in mercury removal from coal-fired flue gas by mineral adsorbents. Chemical Engineering Journal, 379:122263.

[39]LiuJP, HuangXT, LiYY, et al., 2006. Hierarchical nanostructures of cupric oxide on a copper substrate: controllable morphology and wettability. Journal of Materials Chemistry, 16(45):4427-4434.

[40]LiuZ, LiuDY, ZhaoBT, et al., 2020. Mercury removal based on adsorption and oxidation by fly ash: a review. Energy & Fuels, 34(10):11840-11866.

[41]LiuZL, WangDL, PengB, et al., 2017. Mercury re-emission in the smelting flue gas cleaning process: the influence of arsenite. Energy & Fuels, 31(10):11053-11059.

[42]LongYF, HeZ, LiXY, et al., 2022. Removal of elemental mercury from flue gas using the magnetic attapulgite by Mn-Cu oxides modification. Environmental Science and Pollution Research, 29(10):14058-14069.

[43]MaYP, XuHM, QuZ, et al., 2014. Absorption characteristics of elemental mercury in mercury chloride solutions. Journal of Environmental Sciences, 26(11):2257-2265.

[44]MaYP, XuTF, LiL, et al., 2021. Core-shell nanostructure α-Fe₂O₃/SnO₂ binary oxides for the catalytic oxidation and adsorption of elemental mercury from flue gas. Journal of Environmental Chemical Engineering, 9(2):105137.

[45]MeiJ, WangC, KongLN, et al., 2019. Outstanding performance of recyclable amorphous MoS₃ supported on TiO₂ for capturing high concentrations of gaseous elemental mercury: mechanism, kinetics, and application. Environmental Science & Technology, 53(8):4480-4489.

[46]MeiJ, WangC, KongLN, et al., 2020. Remarkable improvement of Ti incorporation on Hg⁰ capture from smelting flue gas by sulfurated γ-Fe₂O₃: performance and mechanism. Journal of Hazardous Materials, 381:120967.

[47]MeiZJ, ShenZM, ZhaoQJ, et al., 2008. Removing and recovering gas-phase elemental mercury by Cu_xCo_3-xO₄ (0.75≤x≤2.25) in the presence of sulphur compounds. Chemosphere, 70(8):1399-1404.

[48]NeupaneMP, KimYK, ParkIS, et al., 2009. Temperature driven morphological changes of hydrothermally prepared copper oxide nanoparticles. Surface and Interface Analysis, 41(3):259-263.

[49]OmineN, RomeroCE, KikkawaH, et al., 2012. Study of elemental mercury re-emission in a simulated wet scrubber. Fuel, 91(1):93-101.

[50]PengB, LiuZL, ChaiLY, et al., 2016. The effect of selenite on mercury re-emission in smelting flue gas scrubbing system. Fuel, 168:7-13.

[51]PoizotP, HungCJ, NikiforovMP, et al., 2003. An electrochemical method for CuO thin film deposition from aqueous solution. Electrochemical and Solid-State Letters, 6(2):C21-C25.

[52]PowellKJ, BrownPL, ByrneRH, et al., 2005. Chemical speciation of environmentally significant heavy metals with inorganic ligands. Part 1: the Hg2+–Cl–, OH–, CO32–, SO42–, and PO43– aqueous systems (IUPAC technical report). Pure and Applied Chemistry, 77(4):739-800.

[53]RadhakrishnanA, RejaniP, BeenaB, 2014. Synthesis, characterization and antimicrobial properties of CuO nanoparticles against gram-positive and gram-negative bacterial strains. International Journal of Nano Dimension, 5(6):519-524.

[54]SunPX, MeiJ, WangC, et al., 2021. Outstanding performance of CuO/Fe-Ti spinel for Hg⁰ oxidation as a co-benefit of no abatement: significant promotion of Hg⁰ oxidation by CuO loading. Catalysis Science & Technology, 11(6):2316-2326.

[55]TangL, LiCT, ZhaoLK, et al., 2018. A novel catalyst CuO-ZrO₂ doped on Cl^- activated bio-char for Hg⁰ removal in a broad temperature range. Fuel, 218:366-374.

[56]ToboonsungB, SingjaiP, 2011. Formation of CuO nanorods and their bundles by an electrochemical dissolution and deposition process. Journal of Alloys and Compounds, 509(10):4132-4137.

[57]UlyankinaA, LeontyevI, MaslovaO, et al., 2018. Copper oxides for energy storage application: novel pulse alternating current synthesis. Materials Science in Semiconductor Processing, 73:111-116.

[58]van LoonLL, MaderEA, ScottSL, 2001. Sulfite stabilization and reduction of the aqueous mercuric ion: kinetic determination of sequential formation constants. The Journal of Physical Chemistry A, 105(13):3190-3195.

[59]VidyasagarCC, NaikYA, VenkateshaTG, et al., 2012. Solid-state synthesis and effect of temperature on optical properties of CuO nanoparticles. Nano-Micro Letters, 4(2):73-77.

[60]WangC, ZhangXF, MeiJ, et al., 2020. Outstanding performance of magnetically separable sulfureted MoO₃/Fe-Ti spinel for gaseous Hg⁰ recovery from smelting flue gas: mechanism and adsorption kinetics. Environmental Science & Technology, 54(12):7659-7668.

[61]WangHN, MaW, YanJB, et al., 2020. Smart modification of HZSM-5 with manganese species for the removal of mercury. ACS Omega, 5(30):19277-19284.

[62]WangHY, WangBD, ZhouJL, et al., 2019. CuO modified vanadium-based SCR catalysts for Hg⁰ oxidation and NO reduction. Journal of Environmental Management, 239:17-22.

[63]WangJ, KongX, DuR, et al., 2012. Removal of vapor-phase elemental mercury over a CuO/AC catalyst. The 2nd International Conference on Energy, Environment and Sustainable Development (EESD 2012), p.64-67.

[64]WangPY, SuS, XiangJ, et al., 2013. Catalytic oxidation of Hg⁰ by CuO-MnO₂-Fe₂O₃/γ‍-Al₂O₃ catalyst. Chemical Engineering Journal, 225:68-75.

[65]WangY, SiWZ, PengY, et al., 2019. Investigation on removal of NO and Hg⁰ with different Cu species in Cu-SAPO-34 zeolites. Catalysis Communications, 119:91-95.

[66]WangZ, LiuJ, YangYJ, et al., 2020. AMn₂O₄ (A=Cu, Ni and Zn) sorbents coupling high adsorption and regeneration performance for elemental mercury removal from syngas. Journal of Hazardous Materials, 388:121738.

[67]WenXY, LiCT, FanXP, et al., 2011. Experimental study of gaseous elemental mercury removal with CeO₂/γ-Al₂O₃. Energy & Fuels, 25(7):2939-2944.

[68]XiangWJ, LiuJ, ChangM, et al., 2012. The adsorption mechanism of elemental mercury on CuO (1 1 0) surface. Chemical Engineering Journal, 200-202:91-96.

[69]XuJF, JiW, ShenZX, et al., 1999. Preparation and characterization of CuO nanocrystals. Journal of Solid State Chemistry, 147(2):516-519.

[70]XuW, AdewuyiYG, LiuYX, et al., 2018. Removal of elemental mercury from flue gas using CuO_x and CeO₂ modified rice straw chars enhanced by ultrasound. Fuel Processing Technology, 170:21-31.

[71]XuWQ, WangHR, ZhouX, et al., 2014. CuO/TiO₂ catalysts for gas-phase Hg⁰ catalytic oxidation. Chemical Engineering Journal, 243:380-385.

[72]YangC, SuXT, WangJD, et al., 2013. Facile microwave-assisted hydrothermal synthesis of varied-shaped CuO nanoparticles and their gas sensing properties. Sensors and Actuators B: Chemical, 185:159-165.

[73]YangJP, ZhaoYC, ZhangJY, et al., 2014. Regenerable cobalt oxide loaded magnetosphere catalyst from fly ash for mercury removal in coal combustion flue gas. Environmental Science & Technology, 48(24):14837-14843.

[74]YangR, MeiCL, WuXS, et al., 2019. Mn-Cu binary metal oxides with molecular-scale homogeneity for Hg⁰ removal from coal-fired flue gas. Industrial & Engineering Chemistry Research, 58(41):19292-19301.

[75]YangSJ, GuoYF, YanNQ, et al., 2011a. Elemental mercury capture from flue gas by magnetic Mn-Fe spinel: effect of chemical heterogeneity. Industrial & Engineering Chemistry Research, 50(16):9650-9656.

[76]YangSJ, GuoYF, YanNQ, et al., 2011b. Nanosized cation-deficient Fe-Ti spinel: a novel magnetic sorbent for elemental mercury capture from flue gas. ACS Applied Materials & Interfaces, 3(2):209-217.

[77]YangW, LiuYX, WangQ, et al., 2017. Removal of elemental mercury from flue gas using wheat straw chars modified by Mn-Ce mixed oxides with ultrasonic-assisted impregnation. Chemical Engineering Journal, 326:169-181.

[78]YangW, LiY, ShiS, et al., 2019. Mercury removal from flue gas by magnetic iron-copper oxide modified porous char derived from biomass materials. Fuel, 256:115977.

[79]YangYJ, LiuJ, ZhangBK, et al., 2017. Experimental and theoretical studies of mercury oxidation over CeO₂-WO₃/TiO₂ catalysts in coal-fired flue gas. Chemical Engineering Journal, 317:758-765.

[80]YangYJ, MiaoS, LiuJ, et al., 2019a. Cost-effective manganese ore sorbent for elemental mercury removal from flue gas. Environmental Science & Technology, 53(16):9957-9965.

[81]YangYJ, LiuJ, WangZ, et al., 2019b. Interface reaction activity of recyclable and regenerable Cu-Mn spinel-type sorbent for Hg⁰ capture from flue gas. Chemical Engineering Journal, 372:697-707.

[82]YangYJ, LiuJ, WangZ, et al., 2019c. Nature of active sites and an oxygen-assisted reaction mechanism for mercury capture by spinel-type CuMn₂O₄ sorbents. Energy & Fuels, 33(9):8920-8926.

[83]YangYJ, LiuJ, DingJY, et al., 2022. Mercury/oxygen reaction mechanism over CuFe₂O₄ catalyst. Journal of Hazardous Materials, 424:127556.

[84]YeD, WangXX, WangRX, et al., 2021. Recent advances in MnO₂-based adsorbents for mercury removal from coal-fired flue gas. Journal of Environmental Chemical Engineering, 9(5):105993.

[85]YiYY, LiCT, ZhaoLK, et al., 2018. The synthetic evaluation of CuO-MnO_x-modified pinecone biochar for simultaneous removal formaldehyde and elemental mercury from simulated flue gas. Environmental Science and Pollution Research, 25(5):4761-4775.

[86]YuanGQ, JiangHF, LinC, et al., 2007. Shape- and size-controlled electrochemical synthesis of cupric oxide nanocrystals. Journal of Crystal Growth, 303(2):400-406.

[87]YueHF, LuP, SuW, et al., 2019. Simultaneous removal of NO_x and Hg⁰ from simulated flue gas over Cu_aCe_bZr_cO₃/r-Al₂O₃ catalysts at low temperatures: performance, characterization, and mechanism. Environmental Science and Pollution Research, 26(13):13602-13618.

[88]ZhangHC, WangT, LiuJ, et al., 2020. Promotional effect of sulfur trioxide (SO₃) on elemental mercury removal over Cu/ZSM-5 catalyst. Applied Surface Science, 511:145604.

[89]ZhangJ, DuanYF, ZhaoWX, et al., 2016. Removal of elemental mercury from simulated flue gas by combining non-thermal plasma with calcium oxide. Plasma Chemistry and Plasma Processing, 36(2):471-485.

[90]ZhangQ, MeiJ, SunPX, et al., 2020. Mechanism of elemental mercury oxidation over copper-based oxide catalysts: kinetics and transient reaction studies. Industrial & Engineering Chemistry Research, 59(1):61-70.

[91]ZhangX, GuoYG, LiuWM, et al., 2008. CuO three-dimensional flowerlike nanostructures: controlled synthesis and characterization. Journal of Applied Physics, 103(11):114304.

[92]ZhangXY, CuiL, LiYZ, et al., 2019. Adsorption and oxidation of mercury by montmorillonite powder modified with different copper compounds. Energy & Fuels, 33(8):7852-7860.

[93]ZhangZ, LiuJ, WangZ, et al., 2021a. Bimetallic Fe-Cu-based metal-organic frameworks as efficient adsorbents for gaseous elemental mercury removal. Industrial & Engineering Chemistry Research, 60(1):781-789.

[94]ZhangZ, LiuJ, WangZ, et al., 2021b. Efficient capture of gaseous elemental mercury based on novel copper-based metal-organic frameworks. Fuel, 289:119791.

[95]ZhaoB, YiHH, TangXL, et al., 2019. Using CuO-MnO_x/AC-H as catalyst for simultaneous removal of Hg⁰ and NO from coal-fired flue gas. Journal of Hazardous Materials, 364:700-709.

[96]ZhaoLL, HuangY, ChenHY, et al., 2017. Study on the preparation of bimetallic oxide sorbent for mercury removal. Fuel, 197:20-27.

[97]ZhengW, LiHL, YangZQ, et al., 2021. Advances in flue gas mercury abatement by mineral chalcogenides. Chemical Engineering Journal, 411:128608.