Similar articles

Abstract: The effect of a constant current (CC) power supply on the CC ocean observation system is a problem that once was neglected. The dynamic characteristics of the CC power supply may have great influence on the whole system, especially the voltage behavior in the event of load change. This needs to be examined. In this paper, a method is introduced to check whether the CC power supply can satisfy the dynamic requirements of the CC ocean observation system. An equivalent model to describe the non-ideal CC power supply is presented, through which the dynamic characteristics can be standardized. To verify the feasibility of this model, a minimum system of a single node in the CC ocean observation system is constructed, from which the model is derived. Focusing on the power failure problem, the output voltage responses are performed and the models are validated. Through the model, the dynamic behavior of the CC power supply is checked in a practical design.

一种针对非理想电源对水下恒流缆系统影响的分析方法

[1]Alonge F, Pucci M, Rabbeni R, et al., 2017. Dynamic modelling of a quadratic DC/DC single-switch boost converter. Electr Power Syst Res, 152:130-139.

[2]Asakawa K, Kojima J, Muramatsu J, et al., 2003. Novel current to current converter for mesh-like scientific underwater cable network-concept and preliminary test result. Proc Oceans. Celebrating the Past ... Teaming Toward the Future, p.1868-1873.

[3]Asakawa K, Kojima J, Muramatsu J, et al., 2007. Current- to-current converter for scientific underwater cable networks. IEEE J Ocean Eng, 32(3):584-592.

[4]Chave AD, Waterworth G, Maffei AR, et al., 2004. Cabled ocean observatory systems. Mar Technol Soc J, 38(2): 30-43.

[5]Chen YH, Yang CJ, Li DJ, et al., 2012. Design and application of a junction box for cabled ocean observatories. Mar Technol Soc J, 46(3):50-63.

[6]Chen YH, Yang CJ, Li DJ, et al., 2013. Study on 10 KVDC powered junction box for a cabled ocean observatory system. China Ocean Eng, 27(2):265-275.

[7]Cruz J, Castilla M, Miret J, et al., 2004. Averaged large-signal model of single magnetic push-pull forward converter with built-in input filter. Proc IEEE Int Symp on Industrial Electronics, p.1023-1028.

[8]Duennebier FK, Harris DW, Jolly J, et al., 2002. Hugo: the Hawaii undersea geo-observatory. IEEE J Ocean Eng, 27 (2):218-227.

[9]Florez-Tapia AM, Ibanez FM, Vadillo J, et al., 2017. Small signal modeling and transient analysis of a trans quasi-Z-source inverter. Electric Power Syst Res, 144:52-62.

[10]Harris DW, Duennebier FK, 2002. Powering cabled ocean- bottom observatories. IEEE J Ocean Eng, 27(2): 202-211.

[11]Howe BM, Kirkham H, Vorpérian V, 2002. Power system considerations for undersea observatories. IEEE J Ocean Eng, 27(2):267-274.

[12]Howe BM, Lukas R, Duennebier F, et al., 2011. ALOHA cabled observatory installation. Proc Oceans MTS/ IEEE KONA, p.1-11.

[13]Huang WX, Abu Qahouq JA, 2017. Small-signal modeling and controller design of energy sharing controlled distributed battery system. Simul Model Pract Theory, 77:1-19.

[14]Lai RS, Ngo KDT, Watson JK, 1992. Steady-state analysis of the symmetrical push-pull power converter employing a matrix transformer. IEEE Trans Power Electron, 7(1):44-53.

[15]Lourdusami SS, Vairamani R, 2014. Analysis, design and experimentation of series-parallel LCC resonant converter for constant current source. IEICE Electr Expr, 11(17):20140711.

[16]Pawlak G, de Carlo EH, Fram JP, et al., 2009. Development, deployment, and operation of Kilo Nalu nearshore cabled observatory. Proc OCEANS-EUROPE, p.1-10.

[17]Petitt RA, Harris DW, Wooding B, et al., 2002. The Hawaii-2 observatory. IEEE J Ocean Eng, 27(2):245-253.

[18]Qu FZ, Wang ZD, Song H, et al., 2015a. A study on a cabled seafloor observatory. IEEE Intell Syst, 30(1):66-69.

[19]Takehira K, 2016. Submarine system powering. In: Chesnoy J, Undersea Fiber Communication Systems (2^nd). Academic Press, London, p.381-402.

[20]Tannir D, Wang Y, Li P, 2016. Accurate modeling of nonideal low-power PWM DC–DC converters operating in CCM and DCM using enhanced circuit-averaging techniques. ACM Trans Des Autom ElectrSyst, 21(4):61.

[21]Taylor SM, 2008. Supporting the operations of the NEPTUNE Canada and VENUS cabled ocean observatories. Proc OCEANS MTS/IEEE Kobe Techno-Ocean, p.1-8.

[22]Trujillo CL, Velasco D, Figueres E, et al., 2011. Modeling and control of a push-pull converter for photovoltaic microinverters operating in island mode. Appl Energy, 88(8):2824-2834.

[23]Wang HJ, Saha T, Zane R, 2017a. Analysis and design of a series resonant converter with constant current input and regulated output current. Proc IEEE Applied Power Electronics Conf and Exposition, p.1741-1747.

[24]Wang HJ, Saha T, Zane R, 2017b. Impedance-based stability analysis and design considerations for DC current distribution with long transmission cable. Proc IEEE Workshop on Control and Modeling for Power Electronics, p.1-8.

[25]Wang ZY, Lai XQ, Wu Q, 2017. A PSR CC/CV flyback converter with accurate CC control and optimized CV regulation strategy. IEEE Trans Power Electron, 32(9): 7045-7055.

[26]Zhang K, Shan ZY, Jatskevich J, 2017. Large- and small-signal average-value modeling of dual-active-bridge DC-DC converter considering power losses. IEEE Trans Power Electron, 32(3):1964-1974.