Similar articles

Abstract: Finding the optimal optoelectronic properties (zero-order optical transmittance, shielding effectiveness, and stray light uniformity) of metallic mesh is significant for its application in electromagnetic interference shielding areas. However, there are few relevant studies at present. Based on optoelectronic properties, we propose a comprehensive evaluation factor Q, which is simple in form and can be used to evaluate the mesh with different parameters in a simple and efficient way. The effectivity of Q is verified by comparing the trend of Q values with the evaluation results of the technique for order preference by similarity to ideal solution (TOPSIS). The evaluation factor Q can also be extended to evaluate the optoelectronic properties of different kinds of metallic meshes, which makes it extremely favorable for metallic mesh design and application.

金属网栅透明导电膜光电性能综合评价因子

[1]Gao F, Gao P, Zhu WT, et al., 2020. 5G evolution promoting innovation of antenna systems. Front Inform Technol Electron Eng, 21(1):188-194.

[2]Greco S, Sarto MS, Tamburrano A, 2008. Shielding performances of ITO transparent windows: theoretical and experimental characterization. Proc Int Symp on Electromagnetic Compatibility-EMC Europe, p.1-6.

[3]Halman JI, Ramsey KA, Thomas M, et al., 2009. Predicted and measured transmission and diffraction by a metallic mesh coating. Proc SPIE 7302, Window and Dome Technologies and Materials XI, Article 73020Y.

[4]Han JC, Wang XN, Qiu YF, et al., 2015. Infrared-transparent films based on conductive graphene network fabrics for electromagnetic shielding. Carbon, 87:206-214.

[5]Hecht DS, Hu LB, Irvin G, 2011. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures. Adv Mater, 23(13):1482-1513.

[6]Hong SK, Kim KY, Kim TY, et al., 2012. Electromagnetic interference shielding effectiveness of monolayer graphene. Nanotechnology, 23(45):455704.

[7]Horng TS, Peng KC, Jau JK, et al., 2003. S-parameter formulation of quality factor for a spiral inductor in generalized two-port configuration. IEEE Trans Microw Theory Techn, 51(11):2197-2202.

[8]Jahanshahloo GR, Lotfi FH, Izadikhah M, 2006. An algorithmic method to extend TOPSIS for decision-making problems with interval data. Appl Math Comput, 175(2):1375-1384.

[9]Ji Y, Huang GH, Sun W, 2015. Risk assessment of hydropower stations through an integrated fuzzy entropy-weight multiple criteria decision making method: a case study of the Xiangxi River. Expert Syst Appl, 42(12):5380-5389.

[10]Khrapach I, Withers F, Bointon TH, et al., 2012. Novel highly conductive and transparent graphene-based conductors. Adv Mater, 24(21):2844-2849.

[11]Kim WM, Ku DY, Lee IK, et al., 2005. The electromagnetic interference shielding effect of indium–zinc oxide/silver alloy multilayered thin films. Thin Sol Films, 473(2):315-320.

[12]Kohin M, Wein SJ, Traylor JD, et al., 1993. Analysis and design of transparent conductive coatings and filters. Opt Eng, 32(5):911-925.

[13]Krohling RA, Lourenzutti R, Campos M, 2015. Ranking and comparing evolutionary algorithms with Hellinger-TOPSIS. Appl Soft Comput, 37:217-226.

[14]Kuo T, 2017. A modified TOPSIS with a different ranking index. Eur J Oper Res, 260(1):152-160.

[15]Lu X, Liu YS, Lu ZG, et al., 2019. High-transmittance double-layer frequency-selective surface based on interlaced multiring metallic mesh. Opt Lett, 44(5):1253-1256.

[16]Lu ZG, Wang HY, Tan JB, et al., 2014. Microwave shielding enhancement of high-transparency, double-layer, submillimeter-period metallic mesh. Appl Phys Lett, 105(24):241904.

[17]Lu ZG, Wang HY, Tan JB, et al., 2016. Achieving an ultra-uniform diffraction pattern of stray light with metallic meshes by using ring and sub-ring arrays. Opt Lett, 41(9):1941-1944.

[18]Madaria AR, Kumar A, Ishikawa FN, et al., 2010. Uniform, highly conductive, and patterned transparent films of a percolating silver nanowire network on rigid and flexible substrates using a dry transfer technique. Nano Res, 3(8):564-573.

[19]Murray IB, Densmore V, Bora V, et al., 2011. Numerical comparison of grid pattern diffraction effects through measurement and modeling with OptiScan software. Proc SPIE 8016, Window and Dome Technologies and Materials XII, Article 80160U.

[20]Palmer C, 2019. A storm over potential 5G interference. Engineering, 5(5):815-816.

[21]Polley D, Barman A, Mitra RK, 2014. EMI shielding and conductivity of carbon nanotube-polymer composites at terahertz frequency. Opt Lett, 39(6):1541-1544.

[22]Rhodes DR, 1972. On the quality factor of strip and line source antennas and its relationship to superdirectivity ratio. IEEE Trans Antenn Propag, 20(3):318-325.

[23]Shih HS, Shyur HJ, Lee ES, 2007. An extension of TOPSIS for group decision making. Math Comput Model, 45(7-8):801-813.

[24]Tan JB, Liu YM, 2008. Optimization of optical communication window mesh through full-wave analysis of periodic mesh. Opt Commun, 281(19):4835-4839.

[25]Tan JB, Lu ZG, 2007. Contiguous metallic rings: an inductive mesh with high transmissivity, strong electromagnetic shielding, and uniformly distributed stray light. Opt Expr, 15(3):790-796.

[26]Vorobyev OB, 2011. Quality factor of an antenna with closely spaced resonances. IEEE Antenn Wirel Propag Lett, 10:1216-1219.

[27]Wang HY, Lu ZG, Tan JB, 2016. Generation of uniform diffraction pattern and high EMI shielding performance by metallic mesh composed of ring and rotated sub-ring arrays. Opt Expr, 24(20):22989-23000.

[28]Wang HY, Lu ZG, Liu YS, et al., 2017. Double-layer interlaced nested multi-ring array metallic mesh for high-performance transparent electromagnetic interference shielding. Opt Lett, 42(8):1620-1623.

[29]Wang HY, Lu ZG, Tan JB, et al., 2018. Transparent conductor based on metal ring clusters interface with uniform light transmission for excellent microwave shielding. Thin Sol Films, 662:76-82.

[30]Wang WQ, Bai BF, Zhou Q, et al., 2018. Petal-shaped metallic mesh with high electromagnetic shielding efficiency and smoothed uniform diffraction. Opt Mater Expr, 8(11):3485-3493.

[31]Wen B, Wang XX, Cao WQ, et al., 2014. Reduced graphene oxides: the thinnest and most lightweight materials with highly efficient microwave attenuation performances of the carbon world. Nanoscale, 6(11):5754-5761.

[32]Wu RY, Cui TJ, 2020. Microwave metamaterials: from exotic physics to novel information systems. Front Inform Technol Electron Eng, 21(1):4-26.

[33]Wu ZC, Chen ZH, Du X, et al., 2004. Transparent, conductive carbon nanotube films. Science, 305(5688):1273-1276.

[34]Yamada T, Morizane T, Arimitsu T, et al., 2008. Application of low resistivity Ga-doped ZnO films to transparent electromagnetic interference shielding material. Thin Sol Films, 517(3):1027-1031.

[35]Yang T, Hung CC, 2007. Multiple-attribute decision making methods for plant layout design problem. Robot Comput-Integr Manuf, 23(1):126-137.

[36]Zeng XY, Zhang QK, Yu RM, et al., 2010. A new transparent conductor: silver nanowire film buried at the surface of a transparent polymer. Adv Mater, 22(40):4484-4488.

[37]Zhang H, Gu CL, Gu LW, et al., 2011. The evaluation of tourism destination competitiveness by TOPSIS & information entropy—a case in the Yangtze River Delta of China. Tour Manag, 32(2):443-451.

[38]Zhang XX, Ren AD, Liu Y, 2020. Decoupling methods of MIMO antenna arrays for 5G applications: a review. Front Inform Technol Electron Eng, 21(1):62-71.

[39]Zhong H, Han Y, Lin J, et al., 2020. Pattern randomization: an efficient way to design high-performance metallic meshes with uniform stray light for EMI shielding. Opt Expr, 28(5):7008-7017.

[40]Zhu HX, Yang YQ, Sheng A, et al., 2019. Layered structural design of flexible waterborne polyurethane conductive film for excellent electromagnetic interference shielding and low microwave reflectivity. Appl Surf Sci, 469:1-9.

[41]Zhu M, Xiong CX, Lee Q, 2007. Research on ITO transparent electromagnetic shielding coatings for E-O system. Proc SPIE 6722, 3^rd Int Symp on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, Article 67223Y.

[42]Zou ZH, Yun Y, Sun JN, 2006. Entropy method for determination of weight of evaluating indicators in fuzzy synthetic evaluation for water quality assessment. J Environ Sci, 18(5):1020-1023.