Similar articles

Abstract: To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.

[1] Chen, C.S., Lee, A.C., 1998. Design of acceleration/deceleration profiles in motion control based on digital FIR filters. International Journal of Machine Tools & Manufacture, 38(7):799-825.

[2] Guo, X.G., Li, C.X., 2003. A new flexible acceleration and deceleration algorithm. Journal of Shanghai Jiaotong University, 37:205-207 (in Chinese).

[3] Guo, X.G., Li, C.X., Ruan, X.Y., 2003. Rapid and accurate positioning method of CNC system. Chinese Journal of Mechanical Engineering, 39:74-78 (in Chinese).

[4] Hu, J.H., Liao, W.H., Zhou, R.R., 1999. Research and comparison for several acceleration and deceleration curves in CNC system. Journal of Nanjing University of Aeronautics & Astronautics, 31:706-711 (in Chinese).

[5] Inaba, H., Sakakibara, S., 1985. Method and Apparatus for Controlling the Acceleration and Deceleration of a Movable Element Without Abrupt Changes in Motion. U.S. Patent 4555758.

[6] Jeon, J.W., 1996. A Generalized Approach for the Acceleration and Deceleration of CNC Machine Tools. Proceedings of the 1996 IEEE 22nd International Conference on Industrial Electronics, Control, and Instrument (IECON), p.1283-1288.

[7] Jeon, J.W., Ha, Y.Y., 2000. A generalized approach for the acceleration and deceleration of industrial robots and CNC machine tools. IEEE Transactions on Industrial Electronics, 47(1):133-139.

[8] Kaan, E., Yusuf, A., 2001. High speed CNC system design. Part 1: jerk limited trajectory generation and quintic spline interpolation. International Journal of Machine Tools & Manufacture, 41:1323-1345.

[9] Khalsa, D.S., Mahoney, B.P., 1990. High Performance Motion Control Trajectory Commands Based on the Convolution Integral and Digital Filtering. Proceedings of the International Intelligent Motion, p.54-61.

[10] Nam, S.H., Yang, M.Y., 2004. A study on a generalized parametric interpolator with real-time jerk-limited acceleration. Computer-Aided Design, 36(1):27-36.

[11] Park, J.S., 1996. Motion profile planning of repetitive point-to-point control for maximum energy conversion efficiency under acceleration conditions. Mechatronics, 6(6):649-663.

[12] Zhang, L.Y., 2002. Control of acceleration and deceleration in data sampling interpolation. Journal of Beijing University of Chemical Technology, 29:91-93 (in Chinese).