Full Text:   <2750>

Summary:  <1997>

CLC number: TU45

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2018-03-20

Cited: 0

Clicked: 4085

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

Chia Weng Boon

https://orcid.org/0000-0003-0065-7523

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2018 Vol.19 No.4 P.255-265

http://doi.org/10.1631/jzus.A1700496


Discontinuum analyses of openings constructed with side drift and limited rock cover


Author(s):  Chia Weng Boon, Chee Wei Neo, David Chew Chiat Ng, Victor Chee Wee Ong

Affiliation(s):  One Smart Engineering Pte Ltd., 658065, Singapore

Corresponding email(s):   chiaweng.boon@oxfordalumni.org, ong@onesmart.com.sg

Key Words:  Rock cover, Twin tunnel, Side drift, Pillar, Distinct element method (DEM)


Share this article to: More |Next Article >>>

Chia Weng Boon, Chee Wei Neo, David Chew Chiat Ng, Victor Chee Wee Ong. Discontinuum analyses of openings constructed with side drift and limited rock cover[J]. Journal of Zhejiang University Science A, 2018, 19(4): 255-265.

@article{title="Discontinuum analyses of openings constructed with side drift and limited rock cover",
author="Chia Weng Boon, Chee Wei Neo, David Chew Chiat Ng, Victor Chee Wee Ong",
journal="Journal of Zhejiang University Science A",
volume="19",
number="4",
pages="255-265",
year="2018",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1700496"
}

%0 Journal Article
%T Discontinuum analyses of openings constructed with side drift and limited rock cover
%A Chia Weng Boon
%A Chee Wei Neo
%A David Chew Chiat Ng
%A Victor Chee Wee Ong
%J Journal of Zhejiang University SCIENCE A
%V 19
%N 4
%P 255-265
%@ 1673-565X
%D 2018
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1700496

TY - JOUR
T1 - Discontinuum analyses of openings constructed with side drift and limited rock cover
A1 - Chia Weng Boon
A1 - Chee Wei Neo
A1 - David Chew Chiat Ng
A1 - Victor Chee Wee Ong
J0 - Journal of Zhejiang University Science A
VL - 19
IS - 4
SP - 255
EP - 265
%@ 1673-565X
Y1 - 2018
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1700496


Abstract: 
The design of rock support for a typical horseshoe shaped tunnel with considerations of it being excavated into a twin arch tunnel was studied using the distinct element method (DEM). Two different competent rock covers, i.e. 4 m and 7.5 m above the tunnel crown, were analysed. The results are relevant to the granitic geological unit in Singapore which has a weathering profile with rockhead found at some locations to be only 20–35 m below ground level and undulating, leaving limited rock cover for some sections along tunnels of similar depth. The verification of the adequacy of competent rock cover is important to ensure that the choice of ground support is suitable, particularly when the tunnel is excavated using the drill-and-blast method. In the opening geometry analysed in this study, a side drift is excavated adjacent to the first tunnel to create a twin arch opening. This creates a pillar between the openings during the intermediate construction stage. The influence of excavating the side drift on the support of the first opening was studied. We found that the bolt forces in the pillar approximately doubled during the excavation of the side drift, which may have been due to the rock joint inclinations and adopted strength parameters. This paper shows how DEM analyses may be used to complement conventional empirical rock mass classifications to design rock supports. Limitations of the pressure relaxation approach to model 3D effects in 2D are acknowledged.

关于具有测边导坑和有限岩石覆盖层的隧道开口的离散分析

目的:针对新加坡的花岗岩地质结构,研究将典型马蹄形隧道挖掘成双拱隧道时岩石支撑的设计问题.利用离散元法分析侧边导坑对隧道主体开口的影响.
创新点:1. 基于平面应变假设, 提出一个针对性的离散元模型以分析侧边导坑的设置对主体隧道支撑的影响; 2. 此模型适用于解决底下长跨度开口的支撑设计问题,如大众捷运系统隧道和紧贴式双孔隧道的建造,补充了传统经验主义的设计方法.
方法:1. 采用离散元法对马蹄形隧道开口支撑问题进行非连续分析; 2. 采用二维平面应变模型简化问题.
结论:1. 离散元法可用于分析有限岩石覆盖层的失效机制,单隧道支撑要求以及增加侧边导坑后的支撑要求;2. 模型计算结果显示,侧边导坑的挖掘使得支柱总的螺栓连接作用力增加了一倍.

关键词:岩石覆盖层;双隧道;侧边导坑;支柱;离散 元法

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Bandis SC, Lumsden AC, Barton NR, 1983. Fundamentals of rock joint deformation. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 20(6):249-268.

[2]Barton N, 2016. Empirical methods, rock mechanics, and structural geological methods useful for excavation in jointed/fractured media. Short Course Notes in EUROCK 2016.

[3]Barton N, Lien R, Lunde J, 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mechanics, 6(4):189-236.

[4]Barton N, By TL, Chryssanthakis P, et al., 1994. Predicted and measured performance of the 62-m span Norwegian Olympic Ice Hockey Cavern at Gjovik. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31(6):617-641.

[5]Bieniawski ZT, 1983. Geomechanics classification (RMR system) in design applications to underground excavations. Proceedings of the International Symposium on Engineering Geology and Underground Construction.

[6]Boon CW, 2013. Distinct Element Modelling of Jointed Rock Masses: Algorithms and Their Verification. PhD Thesis, University of Oxford, UK.

[7]Boon CW, Ooi LH, 2016. Tunnelling past critical structures in Kuala Lumpur: insights from finite element analyses and TZ load transfer analyses. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 47(4):109-122.

[8]Boon CW, Houlsby GT, Utili S, 2012. A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, 44:73-82.

[9]Boon CW, Houlsby GT, Utili S, 2014. New insights into the 1963 Vajont slide using 2D and 3D distinct element method analyses. Géotechnique, 64(10):800-816.

[10]Boon CW, Houlsby GT, Utili S, 2015a. DEM modelling of a jointed beam with emphasis on interface properties. Géotechnique Letters, 5(1):49-55.

[11]Boon CW, Houlsby GT, Utili S, 2015b. Designing tunnel support in jointed rock masses via the DEM. Rock Mechanics and Rock Engineering, 48(2):603-632.

[12]Boon CW, Houlsby GT, Utili S, 2015c. A new rock slicing method based on linear programming. Computers and Geotechnics, 65:12-29.

[13]Chen SL, Lee SC, Gui MW, 2009. Effects of rock pillar width on the excavation behaviour of parallel tunnels. Tunnelling and Underground Space Technology, 24(2):148-154.

[14]Chern JC, Shiao FY, Yu CW, 1998. An empirical safety criterion for tunnel construction. Proceedings of the Regional Symposium on Sedimentary Rock Engineering, p.222-227.

[15]Cundall PA, 1971. A computer model for simulating progressive, large scale movement in blocky rock system. ISRM Symposium, 2:129-136.

[16]GEO (Geotechnical Engineering Office), 2012. GEO Technical Guidance Note No. 32 (TGN 32) Updating of Geoguide 4–Guide to Cavern Engineering. Geotechnical Engineering Office, Civil Engineering and Development Department, The Government of Hong Kong Special Administrative Region, China.

[17]He L, Ma G, 2010. Development of 3-D numerical manifold method. International Journal of Computational Methods, 7:107-129.

[18]Kozicki J, Donze FV, 2008. A new open-source software developed for numerical simulations using discrete modelling methods. Computer Methods in Applied Mechanics and Engineering, 197(49-50):4429-4443.

[19]Li CC, 2016. Analysis of inflatable rock bolts. Rock Mechanics and Rock Engineering, 49(1):273-289.

[20]Ong VCW, Ng DCC, 2014. Overview of design and construction of deep excavation and tunnelling projects in Singapore. Seminar Organised by the Tunnelling and Underground Space Technical Division (TUSTC), The Institution of Engineers Malaysia (IEM), Malaysia.

[21]Panet M, 1993. Understanding deformations in tunnels. In: Hudson JA, Brown ET, Fairhurst C, et al. (Eds.), Comprehensive Rock Engineering, Vol. 1. Pergamon, London, UK, p.663-690.

[22]Pine RJ, Coggan JS, Flynn ZN, et al., 2006. The development of a new numerical modelling approach for naturally fractured rock masses. Rock Mechanics and Rock Engineering, 39(5):395-419.

[23]Sakurai S, 2009. Discussion on the problems in modelling jointed rock reinforced by rock bolts in tunnels. ISRM SINOROCK 2009, p.36-40.

[24]Shi GH, 1988. Discontinuous Deformation Analysis: a New Numerical Model for the Statics and Dynamics of Block Systems. PhD Thesis, University of California, Berkeley, USA.

[25]Smilauer V, 2015. Yet Another Dynamic Engine (YADE) Documentation, 2nd Edition. The YADE Project.

[26]Stillborg EB, 1994. Professional Users Handbook for Rock Bolting, 2nd Edition. Trans Tech Publications Limited.

[27]Vlachopoulos N, Diederichs MS, 2009. Improved longitudinal displacement profiles for convergence confinement analysis of deep tunnels. Rock Mechanics and Rock Engineering, 42(2):131-146.

[28]Wang C, Zhu H, 2013. Study on the failure mechanism of small spacing tunnels by DEM. Proceedings of the 3rd ISRM SINOROCK Symposium: Rock Characterisation, Modelling and Engineering Design Methods, p.613-616.

[29]Zhao J, Broms BB, Zhou Y, et al., 1994a. A study of the weathering of the Bukit Timah Granite Part A: review, field observations and geophysical survey. Bulletin of the International Association of Engineering Geology, 49(1):97-106.

[30]Zhao J, Broms BB, Zhou Y, et al., 1994b. A study of the weathering of the Bukit Timah Granite Part B: field and laboratory investigations. Bulletin of the International Association of Engineering Geology, 50(1):105-111.

[31]Zhao J, Zhou Y, Sun J, et al., 1995. Engineering geology of the Bukit Timah Granite for cavern construction in Singapore. Quarterly Journal of Engineering Geology and Hydrogeology, 28(2):153-162.

[32]Zhou Y, Zhao J, Cai JG, et al., 2003. Behaviour of large-span rock tunnels and caverns under favourable horizontal stress conditions. Proceedings of ISRM 2003– Technology Roadmap for Rock Mechanics, South African Institute of Mining and Metallurgy, p.1381-1386.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE