Similar articles

Abstract: operating point drift over large temperature spans can significantly degrade the performance of servo valves. The direction and magnitude of the deviation of the operating point are uncertain. To analyze and evaluate the mechanism of this complex system with a multi-level structure and multi-variables, it is necessary to construct a theoretical model with a clear physical concept to describe it. However, since the physical processes contain complex variations of structural parameters and flow properties, there is a problem of simplifying approximations in deriving analytical mathematical relations. The advantages of multi-physics field numerical analysis can compensate for this shortcoming of analytical formulations. Based on this, we constructed a whole-valve transfer function model to realize the mechanism analysis and evaluate the operating point drift when a thermal effect acts on a servo valve. The results show that the asymmetric fit relationship between the armature-nozzle assemblies is an important reason for the drift of the operating point caused by the thermal effect. Differences in structural parameters and fluid medium characteristics at different temperatures lead to nonlinear changes in the operating point. When the deviation angle reaches ±1°, an increase in temperature will cause the absolute value of the tangent slope of the displacement deviation of the spool to decrease from 1.44×10^-5 m/°C to 1.25×10^-6 m/°C. The influence of the deviation angle is reflected in the change in the absolute value of the tangent slope of the pressure deviation from 1.14×10³ Pa/°C to 110 Pa/°C.

伺服阀工作点漂移热效应机理分析与评估

[1]AungNZ, LiSJ, 2014. A numerical study of cavitation phenomenon in a flapper-nozzle pilot stage of an electrohydraulic servo-valve with an innovative flapper shape. Energy Conversion and Management, 77:31-39.

[2]AungNZ, YangQJ, ChenM, et al., 2014. CFD analysis of flow forces and energy loss characteristics in a flapper-nozzle pilot valve with different null clearances. Energy Conversion and Management, 83:284-295.

[3]ChenZQ, WangWH, 2018. Analysis of temperature characteristics of electro-hydraulic servo valve based on AMESim. International Conference on Mechanical, Electrical, Electronic Engineering and Science, p.47-53.

[4]Jacob, MchenyaM, ZhangSZ, et al., 2011. A study of flow-field distribution between the flapper and nozzle in a hydraulic servo-valve. Proceedings of the International Conference on Fluid Power and Mechatronics, p.658-662.

[5]KimDH, TsaoTC, 2000. A linearized electrohydraulic servovalve model for valve dynamics sensitivity analysis and control system design. Journal of Dynamic Systems, Measurement, and Control, 122(1):179-187.

[6]LiL, LiCC, YanH, et al., 2017. Research on temperature drift current fluctuation of nozzle flapper servo valve. Journal of Beijing Jiaotong University, 41(3):96-102.

[7]LiL, YanH, ZhangHX, et al., 2018. Numerical simulation and experimental research of the flow force and forced vibration in the nozzle-flapper valve. Mechanical Systems and Signal Processing, 99:550-566.

[8]LiSJ, AungNZ, ZhangSZ, et al., 2013. Experimental and numerical investigation of cavitation phenomenon in flapper-nozzle pilot stage of an electrohydraulic servo-valve. Computers & Fluids, 88:590-598.

[9]LiYS, 2016. Mathematical modelling and characteristics of the pilot valve applied to a jet-pipe/deflector-jet servovalve. Sensors and Actuators A: Physical, 245:150-159.

[10]LiuCH, JiangHZ, 2014. A seventh-order model for dynamic response of an electro-hydraulic servo valve. Chinese Journal of Aeronautics, 27(6):1605-1611.

[11]MchenyaJM, ZhangSZ, LiSJ, 2011. Visualization of flow-field between the flapper and nozzle in a hydraulic servo-valve. Advanced Materials Research, 402:407-411.

[12]MerrittHE, 1967. Hydraulic Control Systems. John Wiley and Sons, New York, USA, p.47-65.

[13]MerrittHE, 1968. Hydraulic control systems. Journal of Applied Mechanics, 35(1):200.

[14]MuDJ, LiCC, 2011. A new mathematical model of twin flapper-nozzle servo valve based on input-output linearization approach. Proceedings of the 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce, p.3662-3666.

[15]PanXD, WangGL, LuZS, 2011. Flow field simulation and a flow model of servo-valve spool valve orifice. Energy Conversion and Management, 52(10):3249-3256.

[16]PountneyDC, WestonW, BanieghbalMR, 1989. A numerical study of turbulent flow characteristics of servo-valve orifices. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power Engineering, 203(2):139-147.

[17]SomashekharSH, SingaperumalM, KumarRK, 2007. Mathematical modelling and simulation of a jet pipe electrohydraulic flow control servo valve. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221(3):365-382.

[18]UrataE, 2000. Study of magnetic circuits for servovalve torque motors. Proceeding of the Bath Workshop on Power Transmission and Control, p.269-282.

[19]YanH, RenYK, YaoL, et al., 2019. Analysis of the internal characteristics of a de Ector Jet servo valve. Chinese Journal of Mechanical Engineering, 32(2):180-192.

[20]YanL, ZhangQF, DuanZH, et al., 2017. Modeling and analysis of servo valve torque motor based on FEM. Proceedings of the IEEE International Conference on Cybernetics and Intelligent Systems and the IEEE Conference on Robotics, Automation and Mechatronics, p.791-796.

[21]YangH, WangW, LuKQ, 2019. Numerical simulations on flow characteristics of a nozzle-flapper servo valve with diamond nozzles. IEEE Access, 7:28001-28010.

[22]YuJ, ZhuangJ, YuDH, 2014. Modeling and analysis of a rotary direct drive servovalve. Chinese Journal of Mechanical Engineering, 27(5):1064-1074.

[23]ZhangQF, YanL, DuanZH, et al., 2020. High torque density torque motor with hybrid magnetization pole arrays for jet pipe servo valve. IEEE Transactions on Industrial Electronics, 67(3):2133-2142.

[24]ZhangX, YinYB, HuangWD, 2010. Influence of temperature on null position pressure characteristics of flapper-nozzle servo valve. Proceedings of the International Conference on Computer Design and Applications, p.V3-257-V3-261.

[25]ZhangY, WangSP, ShiJ, et al., 2020. Evaluation of thermal effects on temperature-sensitive operating force of flow servo valve for fuel metering unit. Chinese Journal of Aeronautics, 33(6):1812-1823.

[26]ZhaoJH, ZhouSL, LuXH, et al., 2015. Numerical simulation and experimental study of heat-fluid-solid coupling of double flapper-nozzle servo valve. Chinese Journal of Mechanical Engineering, 28(5):1030-1038.