CLC number: TG14
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 0000-00-00
Cited: 12
Clicked: 6569
HU Jun, YAN Mi. Preparation of high-permeability NiCuZn ferrite[J]. Journal of Zhejiang University Science B, 2005, 6(6): 580-583.
@article{title="Preparation of high-permeability NiCuZn ferrite",
author="HU Jun, YAN Mi",
journal="Journal of Zhejiang University Science B",
volume="6",
number="6",
pages="580-583",
year="2005",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2005.B0580"
}
%0 Journal Article
%T Preparation of high-permeability NiCuZn ferrite
%A HU Jun
%A YAN Mi
%J Journal of Zhejiang University SCIENCE B
%V 6
%N 6
%P 580-583
%@ 1673-1581
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.B0580
TY - JOUR
T1 - Preparation of high-permeability NiCuZn ferrite
A1 - HU Jun
A1 - YAN Mi
J0 - Journal of Zhejiang University Science B
VL - 6
IS - 6
SP - 580
EP - 583
%@ 1673-1581
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.B0580
Abstract: Appropriate addition of CuO/V2O5 and the reduction of the granularity of the raw materials particle decrease the sintering temperature of niZn ferrite from 1200 °C to 930 °C. Furthermore, the magnetic properties of the niZn ferrite prepared at low temperature of 930 °C is superior to that of the niZn ferrite prepared by sintering at high temperature of 1200 °C because the microstructure of the niZn ferrite sintered at 930 °C is more uniform and compact than that of the niZn ferrite sintered at 1200 °C. The high permeability of 1700 and relative loss coefficient tanδ/μi of 9.0×10−6 at 100 kHz was achieved in the (Ni0.17Zn0.63Cu0.20)Fe1.915O4 ferrite.
[1] Anil Kumar, P.S., Shrotri, J.J., Deshpande, C.E., Date, S.K., 1997. Systematic study of magnetic parameters of NiZn ferrites synthesized by soft chemical approaches. J. Appl. Phys., 81(8):4788-4790.
[2] Burke, J.E., 1958. Ceramic Fabrication Process. Wiley, New York.
[3] Caltun, O.F., Spinu, L., 2001. Magnetic properties of high frequency NiZn ferrites doped with CuO. IEEE Trans. Magn., 37(4):2353-2355.
[4] Caltun, O.F., Spinub, L., Stancua, A.L., Thungb, L.D., Zhou, W., 2002. Study of the microstructure and of the permeability spectra of NiZnCu ferrites. J. Magn. Magn. Mater., 242-245:160-162.
[5] Darko, M., Miha, D., 1999. Use of the retarded solution-reprecipitation process to attain a higher initial permeability in MnZn ferrites. J. Am. Ceram. Soc., 82:1113.
[6] Goldman, A., 1990. Modern Ferrite Technology. Van Nostrand Reinhold, New York.
[7] Hsu, J.Y., Ko, W.S., Chen, C.J., 1995. The effect of V2O5 on the sintering of NiCuZn ferrite. IEEE Trans. Magn., 31:3994-3996.
[8] Hsua, W.C., Chen, S.C., Kuo, P.C., Lie, C.T., Tsai, W.S., 2004. Preparation of NiCuZn ferrite nanoparticles from chemical co-precipitation method and the magnetic properties after sintering. Mater. Sci. Eng. B-solid, 111:142-149.
[9] Jankovskis, J., 2000. Modelling the Frequency Dependence of Complex Permeability Based on Statistics from Polycrystalline Ferrites Microstructure. Ferrites proceedings of the Eight International Conference on Ferrites (ICF’8), Kyoto and Tokyo, p.319.
[10] Kim, C.W., Koh, J.G., 2003. A study of synthesis of NiCuZn-ferrite sintering in low temperature by metal nitrates and its electromagnetic property. J. Magn. Magn. Mater., 257:355-368.
[11] Kim, C.S., Kim, W.C., An, S.Y., Lee, S.W., 2000. Structure and Mossbauer studies of Cu doped NiZn ferrite. J. Magn. Magn. Mater., 215-216:213-216.
[12] Kondo, K., 1999. The Digest Edition of Tokin Technical Review. Vol. 26, Tokin Corporation, Sendai, Japan, p.1.
[13] Kondo, K., Chiba, T., Yamada, S., Otsuki, E., 2000. Analysis of power loss in Ni-Zn ferrites. J. Appl. Phys., 87(9):6229-6231.
[14] Lebourgeois, R., 2000. Low Losses NiZnCu Ferrites. Ferrites proceedings of the Eight International Conference on Ferrites (ICF’8). Kyoto and Tokyo, p.576.
[15] Li, Y., Zhao, J.P., Han, J.C., 2002. Self-propagating high temperature synthesis of Ni0.35Zn0.65Fe2O4 ferrite powders. Mater. Res. Bull, 37:583-592.
[16] Nakamura, T., 1997. Low-temperature sintering of Ni-Zn-Cu ferrite and its permeability spectra. J. Magn. Magn. Mater., 168:285-291.
[17] Rezlescu, E., Sachelarie, L., Popa, P.D., Rezlescu, N., 2000. Effect of substitution of divalent ions on the electrical and magnetic properties of Ni-Zn-Me ferrites. IEEE Trans. Magn, 36:3962-3967.
[18] Seo, S.H., Oh, J.H., 1999. Effect of MoO3 addition of sintering behaviors and magnetic properties of NiCuZn ferrite for multilayer chip inductor. IEEE Trans. Magn., 35(5):3412-3414.
[19] Shrotri, J.J., Kulkarni, S.D., Deshpande, C.E., Mitra, A., Sainkar, S.R., Anil Kumar, P.S., Date, S.K., 1999. Effect of Cu substitution on the magnetic and electrical properties of Ni-Zn ferrite synthesised by soft chemical method. Mater. Chem. and Phys., 59:1-5.
[20] Stoppels, D., 1996. Developments in soft magnetic power ferrites. J. Magn. Magn. Mater, 160:323-328.
[21] Tsutaoka, T., Ueshima, M., Tokunaga, T., 1995. Frequency dispersion and temperature variation of complex permeability of Ni-Zn ferrite composite materials. J. Appl. Phys., 78(6):3983-3991.
[22] Wang, X.H., 2001. 103rd Annual Meeting of American Ceramics Society. Indianapolis, p.22-25.
[23] Yamada, S., Ossuki, E., 1997. Analysis of eddy current loss in Mn-Zn ferrites for power supplies. J. Appl. Phys., 81:4791-4793.
[24] Zhang, H., Ma, Z.W., Zhou, J., Yue, Z.X., Li, L.t., Gui, Z.L., 2000. Preparation and investigation of (Ni0.15Cu0.25Zn0.60) Fe1.96O4 ferrite with very high initial permeability from self-propagated powders. J. Magn. Magn. Mater., 213:304-308.
Open peer comments: Debate/Discuss/Question/Opinion
<1>
larry@appliedquantum<yang@appliedquantum.con>
2014-04-06 16:18:27
we feel this is very good paper.
Miodrag Zdujic@Institute of Technical Sciences of the Serbian Academy of Sciences and Arts<miodrag.zdujic@itn.sanu.ac.rs>
2014-03-28 19:33:28
Request for the paer that has been cited.
BKC@Laird Technologies<chandrasekhar.bk@lairdtech.com>
2011-06-30 12:47:35
We feel this is a good article
Hu Jun@ZJUT<hjzjut@zjut.edu.cn>
2010-11-05 15:28:21
very good