Full Text:   <13664>

Summary:  <2325>

CLC number: TH13

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2015-04-13

Cited: 5

Clicked: 14565

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

Bing Xu

http://orcid.org/0000-0003-0236-7896

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2015 Vol.16 No.5 P.404-417

http://doi.org/10.1631/jzus.A1400309


Effects of index angle on flow ripple of a tandem axial piston pump


Author(s):  Bing Xu, Shao-gan Ye, Jun-hui Zhang

Affiliation(s):  The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China

Corresponding email(s):   bxu@zju.edu.cn

Key Words:  Axial piston pump, Flow ripple, Index angle, Sensitivity analysis.

This article has been corrected, see doi:10.1631/jzus.A14e0309


Bing Xu, Shao-gan Ye, Jun-hui Zhang. Effects of index angle on flow ripple of a tandem axial piston pump[J]. Journal of Zhejiang University Science A, 2015, 16(5): 404-417.

@article{title="Effects of index angle on flow ripple of a tandem axial piston pump",
author="Bing Xu, Shao-gan Ye, Jun-hui Zhang",
journal="Journal of Zhejiang University Science A",
volume="16",
number="5",
pages="404-417",
year="2015",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1400309"
}

%0 Journal Article
%T Effects of index angle on flow ripple of a tandem axial piston pump
%A Bing Xu
%A Shao-gan Ye
%A Jun-hui Zhang
%J Journal of Zhejiang University SCIENCE A
%V 16
%N 5
%P 404-417
%@ 1673-565X
%D 2015
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1400309

TY - JOUR
T1 - Effects of index angle on flow ripple of a tandem axial piston pump
A1 - Bing Xu
A1 - Shao-gan Ye
A1 - Jun-hui Zhang
J0 - Journal of Zhejiang University Science A
VL - 16
IS - 5
SP - 404
EP - 417
%@ 1673-565X
Y1 - 2015
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1400309


Abstract: 
A high noise level is one of the prominent shortcomings of an axial piston pump which is widely used in industrial and mobile applications. In this paper, a simulation model of an axial piston pump is developed based on a single piston chamber model, for capturing the dynamic characteristics of the discharge flow rate. The compressibility of fluid and main leakages across different friction pairs are considered. The simulation model is validated by a comparison of discharge flow ripple with the measured results using the secondary source method. The main cause of flow ripple is identified by a comparison of the frequency spectrums of actual and kinematic flow ripples. Flow rates with different index angles are analyzed in time and frequency domains. The findings show that an index angle of 20° is the most effective in reducing the flow ripple of a tandem axial piston pump, because the frequency contents at odd harmonics can be cancelled out. A sensitivity analysis is conducted at different pressure levels, speeds, and displacement angles, which reveals that with an index angle of 20°, the sensitivity of flow ripple can be reduced by almost 50% over a wide variety of working conditions.

The authors derived a simulation model of an axial piston pump to express its flow rate ripple, taking the fluid compressibility and main leakages across different friction pairs into consideration. Based on the results using the simulation model they claimed that the best index angle is 20° for a tandem axial piston pump utilizing nine pistons within one rotating group.

转位角对串联式轴向柱塞泵流量脉动的影响

目的:探索转位角对串联泵出口流量脉动的影响,揭示转位角对流量脉动的影响机理,获得最佳转位角以减小流量脉动,以及探索转位角对工况的敏感性。
方法:1.建立基于单柱塞腔模型的单柱塞泵模型,求解其出口流量脉动特性;2.研究不同转位角下串联泵的出口流量脉动,优选转位角;3.对比不同转位角下出口流量脉动对工况的敏感性。
结论:1.对于单个转子使用九柱塞的串联式轴向柱塞泵,最佳转位角是20°,因该角度可消除流量脉动在奇数阶次下的幅值;2.在大范围工况下,转位角为20°时可减小约50%的流量脉动。

关键词:轴向柱塞泵;流量脉动;转位角;敏感性分析

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

This article has been corrected, see doi:10.1631/jzus.A14e0309

Reference

[1]Edge, K.A., Darling, J., 1989. The pumping dynamics of swash plate piston pumps. Journal of Dynamic Systems, Measurement, and Control, 111(2):307-312.

[2]Edge, K.A., Johnston, D.N., 1990a. The ‘secondary source’ method for the measurement of pump pressure ripple characteristics. Part 1: description of method. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 204(11):33-40.

[3]Edge, K.A., Johnston, D.N., 1990b. The ‘secondary source’ method for the measurement of pump pressure ripple characteristics. Part 2: experimental results. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 204(11):41-46.

[4]Ericson, L., 2009. Flow Pulsations in Fluid Power Machines– a Measurement and Simulation Study. Licentiate Thesis, Linköping University, Linköping, Sweden.

[5]Ericson, L., Ölvander, J., Palmberg, J.O., 2007. Flow pulsation reduction for variable displacement motors using cross-angle. Bath Workshop on Power Transmission and Motion Control, Bath, UK, p.103-116.

[6]Ericson, L., Ölvander, J., Palmberg, J.O., 2008. On optimal design of hydrostatic machines. Proceedings of the 6th International Fluid Power Conference, Dresden, Germany, p.273-286.

[7]Ericson, L., Johansson, A., Palmberg, J.O., 2009. Noise reduction by means of non-uniform placement of pistons in a fluid power machine. ASME 2009 Dynamic Systems and Control Conference, Volume 2, California, USA, p.381-388.

[8]Fiebig, W., 2001. Schwingungs und Gerauschverhalten der Verdrangerpumpen und Hydraulischen Systeme. PhD Thesis, University of Stuttgart, Stuttgart, Germany (in German).

[9]Huang, J.H., Zhao, H., Quan, L., et al., 2014. Development of an asymmetric axial piston pump for displacement-controlled system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(8):1418-1430.

[10]ISO (International Organization for Standardization), 1996. Hydraulic Fluid Power-Determination of Pressure Ripple Levels Generated in System and Components. Part 1: Precision Method for Pumps, ISO 10767-1:1996. ISO.

[11]Ivantysyn, J., Ivantysynova, M., 2003. Hydrostatic Pumps and Motors: Principles, Design, Performance, Modelling, Analysis, Control and Testing. Akademia Books International, New Dehli, India, p.125-135.

[12]Johansson, A., Andersson, J., Palmberg, J.O., 2001. Effects of cross-angle on piston forces and bending moments in axial piston pumps. The 7th International Symposium on Fluid Control, Measurement and Visualization, Sorrento, Italy, p.1-10.

[13]Johansson, A., Andersson, J., Palmberg, J.O., 2002. Optimal design of the cross-angle for pulsation reduction in variable displacement pumps. Bath Workshop on Power Transmission and Motion Control, Bath, UK, p.319-334.

[14]Johansson, A., Andersson, J., Palmberg, J.O., 2003. Influence from the cross-angle on piston forces and bending moments in variable hydraulic piston pumps. Technical Report No. LiTH-IKP-R-1391, Linköping University, Sweden.

[15]Johansson, A., Ölvander, J., Palmberg, J.O., 2007. Experimental verification of cross-angle for noise reduction in hydraulic piston pumps. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221(3):321-330.

[16]Landsberger, B., 2003. Using the ideal function concept for machine noise control. The Journal of the Acoustical Society of America, 114(4):2440-2440.

[17]Ma, J.E., Fang, Y.T., Xu, B., et al., 2010. Optimization of cross angle based on the pumping dynamics model. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 11(3):181-190.

[18]Manring, N.D., 2003. Valve-plate design for an axial piston pump operating at low displacements. Journal of Mechanical Design, 125(1):200-205.

[19]Manring, N.D., Mehta, V.S., Raab, F.J., et al., 2007. The shaft torque of a tandem axial-piston pump. Journal of Dynamic Systems, Measurement, and Control, 129(3):367-371.

[20]Mehta, V.S., 2006. Torque Ripple Attenuation for an Axial Piston Swash Plate Type Hydrostatic Pump: Noise Considerations. PhD Thesis, University of Missouri-Columbia, USA.

[21]Nafz, T., Murrenhoff, H., Rudik, R., et al., 2012. Noise reduction of hydraulic systems by axial piston pumps with variable reversing valves. The 8th International Fluid Power Conference, Aachen, Germany, p.1-12.

[22]Seeniraj, G.K., Ivantysynova, M., 2011. A multi-parameter multi-objective approach to reduce pump noise generation. International Journal of Fluid Power, 12(1):7-17.

[23]Xu, B., Zhang, J.H., Yang, H.Y., 2013. Simulation research on distribution method of axial piston pump utilizing pressure equalization mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227(3):459-469.

[24]Xu, B., Sun, Y.H., Zhang, J.H., et al., 2015. A new design method for the transition region of the valve plate for an axial piston pump. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 16(3):229-240.

[25]Ye, S.G., Xu, B., Zhang, J.H., 2014. Investigation into the effects of index angle on fluidborne noise and structureborne noise of a tandem axial piston pump. 8th FPNI PhD Symposium on Fluid Power, Lappeenranta, Finland, p.V001T01A002.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE