Similar articles

Abstract: Large vertical steel tanks for fluid storage are usually constructed on soft foundations, so it is not surprising that the tank wall will settle unevenly with the settlement of the foundation, thus inducing deformations and stresses in the tank. This work investigates the linear static behavior of floating-roof tanks under harmonic settlement through finite element (FE) analyses. The influences of the radius-to-thickness ratio, the height-to-radius ratio and the wind girder stiffness on the structural behavior are first analyzed. Comparisons between the circumferential stresses in the wind girder and the vertical stresses in the tank bottom are then made. The displacement and the stress along the tank height are also discussed, and the concept of tank division along its height is presented. Finally, a design approximation for the radial displacement at the tank top is developed based on FE results, and a settlement criterion based on the top radial displacement is proposed which can be used in practical design.

[1] GB 50341, 2003. Code for Design of Vertical Cylindrical Welded Steel Oil Tanks. Chinese Planning Press, Beijing (in Chinese).

[2] Godoy, L.A., Sosa, E.M., 2003. Localized support settlements of thin-walled storage tanks. Thin-Walled Structures, 41(10):941-955.

[3] Jonaidi, M., Ansourian, P., 1996. Effects of Differential Settlement on Storage Tank Shells. Advances in Steel Structures. Proceedings of First International Conference on Advances in Steel Structures, Elsevier, p.821-826.

[4] Jonaidi, M., Ansourian, P., 1998. Harmonic settlement effects on uniform and tapered tank shells. Thin-Walled Structures, 31(1-3):237-255.

[5] Kamyab, H., Palmer, S.C., 1989. Analysis of displacements and stresses in oil storage tanks caused by differential settlement. Proceedings of the Institution of Mechanical Engineers, Part C. Journal of Mechanical Engineering Science, 203(C1):61-70.

[6] Malik, Z., Morton, J., Ruiz, C., 1977. Ovalization of cylindrical tanks as a result of foundation settlement. Journal of Strain Analysis, 12(4):339-348.

[7] Marr, W.A., Ramos, J.A.J., Lambe, T.W., 1982. Criteria for settlement of tanks. Journal of the Geotechnical Engineering Division, ASCE, 108(GT8):1017-1039.

[8] Palmer, S.C., 1994. Stresses in storage tanks caused by differential settlement. Proceedings of the Institute of Mechanical Engineering, Part E. Journal of Process Mechanical Engineering, 208(E1):5-16.

[9] Palmer, S.C., Ceng, M.A., 1992. Structural effects of foundation tilt on storage tanks. Proceedings of the Institute of Mechanical Engineering, Part E. Journal of Process Mechanical Engineering, 206(E2):83-92.